Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Tailoring of fibre/fibre joints in order to avoid the negative impacts of drying on paper properties

  • Annsofie Torgnysdotter and Lars Wågberg
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2006-21-03-p411-418
KEYWORDS: Bonded area; Bonding strength; Chemical bonds; Dry strength; Joints; Kraft pulp; Paper strength; Polyelectrolyte; Recycling; Swelling
Published Online: 2018-07-19
Published in Print: 2006-08-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 21 Issue 3
Submit manuscript

Journal and Issue

Articles in the same Issue

The effect of lignin on calcium carbonate scaling
Effects of carbonate on delignification of birch wood in Kraft cooking
Direct observations of bonding influence on the tensile creep behavior of paper
[AlMnII(H2O)W11O39]7– Anion oxidation kinetics and simulative overall studies of catalytic oxygen bleaching
Acoustic investigation of cavitation noise from offset ink film splitting
Use of an on-press acoustic sensor to monitor coldset offset printing of newspaper
Fibre damage in unbleached reinforcement pulp – The effect of hemicelluloses and lignin on the susceptibility of fibres to damage during oxygen delignification
Effect of chemical flocculation mechanisms on rheology of fibre pulp suspensions
3D laser scanner: A new method for estimating the dimensions of wood pulp chips
Twin-wire roll forming of mechanical base paper from three furnishes – effects on formation and mechanical properties
The behavior of chromophoric structures in softwood mechanical pulp on bleaching with alkaline hydrogen peroxide
Modeling thickness and roughness reduction of paper in calendering
Acid/base and metal adsorption properties of CMC-type softwood Kraft pulps of different charge
A Re-evaluation of factors controlling print rub on matt and silk coated papers
Estimation of the pore volume at the interface between paper web and press felt
Correlations between properties of water-based flexographic inks and their print uniformity on PE-coated board
Tailoring of fibre/fibre joints in order to avoid the negative impacts of drying on paper properties
A method to optimise birch CTMP pre-treatments by direct measurement of brightness on birch wood
Downloaded on 24.5.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2006-21-03-p411-418/html
Scroll to top button