Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Indirect polyelectrolyte titration of cellulosic fibers – Surface and bulk charges of cellulosic fibers

  • A. Elisabet Horvath and Tom Lindström
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2007-22-01-p087-092
Keywords: Polyelectrolyte titration; Poly-DADMAC; Charge ratio; Carboxymethylation; Carboxymethyl cellulose; PFI-beating
Published Online: 2018-07-19
Published in Print: 2007-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 22 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

A novel method for washing lignin precipitated from kraft black liquor – Laboratory trials
Pressurized hydrogen peroxide bleaching of Eucalyptus globulus pulps. Part I: Effect of process variables
Pressurized hydrogen peroxide bleaching of Eucalyptus globulus pulps. Part II: Kinetics
Simulation of tensile properties of paper in the z-direction
Calculation of the influence of carbonate concentration on the formation of fatty acid calcium soaps in pulp washing
The effect of cooking kappa number on oxygen delignification of eucalypt kraft pulp
Evaluation of the tensile stress-strain properties in the thickness direction of paper materials
The role of surface hydrophobicity in offset ink setting
Plug screw and Bivis treatment under pressurized conditions and subsequent LC refining
Effect of local curls on the cockling of paper
The effect of fiber charge enhanced by chemical oxidation on paper dry-tensile stiffness
Investigating the influence of pulp types on washing using a new measurement technique
Indirect polyelectrolyte titration of cellulosic fibers – Surface and bulk charges of cellulosic fibers
Adsorption of colloidal extractives and dissolved hemicelluloses on thermomechanical pulp fiber components studied by QCM-D
The influence of thickeners on the rheological properties of PCC suspensions and on the surface structure of PCC-based layers
Determination of the in-plane wetting of a board structure using NIR spectroscopy
Light-induced yellowing of mecanical and chemimecanical pulp sheets – influence of wood raw material, process and aging method
Refiner plate clash detection using an embedded force sensor
ToF-SIMS characterization of modified starch on fine and LWC base papers
Doctorial dissertations in the field of pulp and paper science and technology 2006
Downloaded on 29.5.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2007-22-01-p087-092/html
Scroll to top button