Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Revisiting polarized light microscopy for fiber-fiber bond area measurement - Part I: Theoretical fundamentals

  • Lisbeth Kappel , Ulrich Hirn , Eduard Gilli , Wolfgang Austria and Robert Schennach
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2010-25-01-p065-070
KEYWORDS: Fiber-fiber bond; Bond area measurement; Polarized light microscopy; Microtomy
Published Online: 2018-07-19
Published in Print: 2010-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 25 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

Extended impregnation in the kraft cook – an approach to improve the overall yield in eucalypt kraft pulping
Correlations for the viscosity of lignin lean black liquor
Crystallization in a pilot evaporator – Comparison between black liquor and black liquor model substances
Optimization of treatment sequences for the production of dissolving pulp from birch kraft pulp
Fibre Floc Evolution Model, Part I: Flocculation in a headbox
Fibre Floc Evolution Model, Part II: Influence of jet-towire ratio on the resulting fibre floc evolution in the initial drainage zone
CFD modeling of non-Newtonian fluid mixing accounting for transient changes in local solids concentration – application to an agitated pulp stock chest
Revisiting polarized light microscopy for fiber-fiber bond area measurement - Part I: Theoretical fundamentals
Revisiting polarized light microscopy for fiber-fiber bond area measurement - Part II: Proving the applicability
Quality loss of refined softwood bleached kraft pulp during agitated storage
Effect of excess dispersant on surface properties and liquid interactions on calcium carbonate containing coatings
Influence of plasma activation on absorption of offset ink components into pigment-coated paper
Fusing of electrophotographic toner on thermally engineered coated paper
A novel SEM cross-section analysis of paper coating for separation of latex from void volume
Starch-hybrid fillers for paper
Aluminum toxicity in a soil-plant system after paper mill sludge compost application
Downloaded on 18.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2010-25-01-p065-070/html
Scroll to top button