Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Coating: Effect of base paper grammage and electrolyte content on electrical and dielectric properties of coated papers

  • Kaj Backfolk EMAIL logo , Jonas Sidaravicius , Petri Sirviö , Robertas Maldzius , Tadeus Lozovski and Jarl B. Rosenholm
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2010-25-03-p319-327
Keywords: Conductivity; Charging; Charge decay; Dielectric; Coated paper; Electrophotography
Published Online: 2018-07-19
Published in Print: 2010-08-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 25 Issue 3
Submit manuscript

Journal and Issue

Articles in the same Issue

Mechanical Pulping: High consistency hydrogen peroxide bleaching of mechanical pulps with varying amounts of fines
Mechanical Pulping: Birch pulp fractions for fine paper and board
Paper chemistry: Wet pressing of wheat straw pulp – correlations between dewatering parameters
Paper Chemistry: Influence of pH on the adsorption of dissolved and colloidal substances in a thermo-mechanical pulp filtrate onto talc
Paper chemistry: Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 1. Adsorption
Paper Chemistry: Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 2. Flocculation
Coating: Effect of base paper grammage and electrolyte content on electrical and dielectric properties of coated papers
Paper physics: TMP long fibres as reinforcement pulp. Part 1. Laboratory tests
Paper physics: TMP long fibres as reinforcement pulp Part 2. Pilot tests
Paper physics: Experimental study of non-linear stress relaxation and creep of paper materials and the relation between the two types of experiments
Paper Physics: Modeled and measured bending stiffness of polyethylene coated solid fiberboard
Paper physics: Measuring the out-of-plane shear strength profiles in different paper qualities
Printing: Measuring the Penetration Properties of Starch-Treated Wood-Free Paper
Printing: The role of binder type in determining inkjet print quality
Printing: Methods for measuring and predicting the printability of paper Printing Methods for measuring and predicting the printability of paper
Papermaking: Simulation-based Optimization and Decision Support for Conflicting Objectives in Papermaking
Downloaded on 26.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2010-25-03-p319-327/html
Scroll to top button