Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Investigation of interfibre joint failure and how to tailor their properties for paper strength

  • Mikael S Magnusson
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2016-31-01-p109-122
Keywords: Interfibre joint strength; Paper mechanics; Cohesive zone modelling; Fibre-fibre joints
Published Online: 2018-07-19
Published in Print: 2016-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 31 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

Utilizing active pH control for enhanced hot-water extraction of wood
On acoustical properties of novel foam-formed cellulose-based material
Phosphorylated nanofibrillated cellulose: production and properties
Life Cycle Assessment of lignin extraction in a softwood kraft pulp mill
Sulfur-free pulping of hot-water-extracted spruce sawdust
The effect of foil rotor design on some aspects of pulp screen performance
On the origin of the spectroscopic signals of cellulose II-type in sulphite dissolving pulp
Mill tests on separating green liquor dregs with hydrocyclone
The relation between net power, gap, and forces on bars in low consistency refining
Determination of rosin-size retention in wet-end process by quantifying the resin acid content in paper products
Dynamic model and simulation for a high consistency refining process
In-plane strength anisotropy and layering effects for laboratory sheets with recycled pulp and softwood kraft pulp
Investigation of interfibre joint failure and how to tailor their properties for paper strength
Short compression testing of multi-ply paperboard, influence from shear strength
Multilayer assembly onto pulp fibres using oppositely charged microfibrillated celluloses, starches, and wetstrength resins − Effect on mechanical properties of CTMP-sheets
On the accuracy of shaping from shading algorithm for restoring three-dimensional model of printing dot
The effect of multilayer polyelectrolyte coating on inkjet ink water fastness and rub resistance
Measurements and dimensional scaling of spontaneous imbibition of inkjet droplets on paper
Deinking by flotation under neutral condition using fatty alcohol ethoxylates
Downloaded on 28.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2016-31-01-p109-122/html
Scroll to top button