<b>Influence of coarse aggregate on concrete’s elasticity modulus
Abstract
The modulus of elasticity of concrete is an important property because it is crucial for the control of deformation. The impossibility of obtaining concrete with higher elasticity modulus rates may cause economic liabilities due to the need for larger structural elements. Current paper evaluates three compressive strength classes (20, 30 and 40MPa) of concrete produced with two types of coarse aggregate, basalt and dolomite rock from the Triângulo Mineiro region, Brazil. Further, 459 cylindrical test specimens were cast for the experimental study. The experimental results of the elasticity modulus rates were compared and with formulations prescribed by four standards: ABNT NBR 6118, ACI 318, Eurocode 2 and FIB Model Code. Comparisons demonstrated that the effect of coarse aggregate on the elasticity modulus was negligible when compared to the concrete’s resistance class.
Downloads
DECLARATION OF ORIGINALITY AND COPYRIGHTS
I Declare that current article is original and has not been submitted for publication, in part or in whole, to any other national or international journal.
The copyrights belong exclusively to the authors. Published content is licensed under Creative Commons Attribution 3.0 (CC BY 3.0) guidelines, which allows sharing (copy and distribution of the material in any medium or format) and adaptation (remix, transform, and build upon the material) for any purpose, even commercially, under the terms of attribution.
Read this link for further information on how to use CC BY 3.0 properly.
