Simulation and Experimental Research of Bearing Crown Roller-Raceway by Non-Uniform Time Effect Electrochemical Mechanical Machining

Xing Hua Zheng; Ze Fei Wei; Bin Tao

doi:10.4028/www.scientific.net/AMR.721.377

Paper Titles

Experimental Study on Technical Difficulties of Botswana First Circulating Fluidized Bed Boiler during Loading Process
p.357

Simulation of an Explosive Separation Device Used in Aerospace Craft
p.363

Analog Circuits Fault Diagnosis Using Multifractal Analysis
p.367

Software Technology Research on Control System of Ultra High Pressure Water Jet Rust Removal Equipment
p.372

Simulation and Experimental Research of Bearing Crown Roller-Raceway by Non-Uniform Time Effect Electrochemical Mechanical Machining
p.377

Mathematical Modeling and Experimental Study on Electrochemical Deburring of Miniature Holes
p.382

Parameter Optimization on Bolt Supporting of Deep Roadway Surrounding Rock
p.387

A Method of Improving Signal Capture Ability of Digital Oscilloscope
p.392

The FEM Simulation of the Pressure and Fine-Blanking Quality
p.397

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 721Simulation and Experimental Research of Bearing...

Simulation and Experimental Research of Bearing Crown Roller-Raceway by Non-Uniform Time Effect Electrochemical Mechanical Machining

Abstract:

Electrochemical mechanical machining (ECMM) was employed to process the bearing crown raceway to solve the traditional problems. Firstly, a mathematical model about the electrochemical machining with non-uniform time effect of crown raceway was created. The crown shape obtained at different cathode shape was analyzed. The cathode shape was then numerical simulated and acquired according to the anode crown. Finally, the bearing raceway was processed via ECMM with non-uniform time effect using the crown cathode, improving the surface quality and obtaining a surface with certain crown.

You might also be interested in these eBooks

Recent Advancement on Material Science and Manufacturing Technologies

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 721)

Pages:

377-381

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.721.377

Citation:

Cite this paper

Online since:

July 2013

Authors:

Xing Hua Zheng, Ze Fei Wei, Bin Tao

Keywords:

Crown Raceway, Electrochemical Mechanical Machining, Non-Uniform Time, Numerical Simulation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S. Neagu-Ventzel, S. Cioc, I. Marinescu, A wear model and simulation of superfinishing process: analysis for the superfinishing of bearing rings, Wear. 260(2006) 1061-1069.

DOI: 10.1016/j.wear.2005.07.024

Google Scholar

[2] R.S. Sayles, S.Y. Poon, Surface topography and rolling element vibration, Precis Eng. 3(1981) 137-144.

DOI: 10.1016/0141-6359(81)90004-0

Google Scholar

[3] H. Huang, H.P. Wang, An integrated monitoring and diagnostic system for roller bearings, Int J Adv Manuf Technol. 12(1996) 37-46.

DOI: 10.1007/bf01178960

Google Scholar

[4] Y.J. Seo, Electrochemical-mechanical polishing application: Monitoring of electrochemical copper removal from current-voltage characteristics in HNO3 electrolyte, Microelectron Eng. 88(2011) 46-52.

DOI: 10.1016/j.mee.2010.08.019

Google Scholar

[5] I.D. Marinescu, E. Uhlmann, T.K. Doi, Handbook of lapping and polishing. CRC Press, Florida, 2006.

Google Scholar