Effect of Zeta Potential of Stanum Oxide (SnO2) on Electrophoretic Deposition (EPD) on Porous Alumina

Siti Alwani Binti Ab. Aziz; Shahrin Hisham Amirnordin; Hamimah Abdul Rahman; Hasan Zuhudi Abdullah; Hariati Taib

doi:10.4028/www.scientific.net/AMR.795.334

Paper Titles

Effect of Compatibilizer on Mechanical Properties and Water Absorption Behaviour of Coconut Fiber Filled Polypropylene Composite
p.313

Short Review of Ultrafiltration of Polymer Membrane as a Self-Cleaning and Antifouling in the Wastewater System
p.318

Effect pf Thermoplastic Polymer Waste (PET) in Lightweight Concrete
p.324

Design and Fabrication of PDMS Microchamber for Fast Reaction Assays in Biosensing Application
p.329

Effect of Zeta Potential of Stanum Oxide (SnO₂) on Electrophoretic Deposition (EPD) on Porous Alumina
p.334

Response of Functionality Graded Hydroxyapatite/F-75 in Saline Solution 0.9% NaCl
p.338

Effect of Compaction Pressure on Microstructure and Properties of Copper-Based Composite Prepared by Mechanical Alloying and Powder Metallurgy
p.343

The Mechanical Properties of PET Fiber Reinforced Concrete from Recycled Bottle Wastes
p.347

Performance of Concrete Using Light Waste PET Fibre
p.352

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 795Effect of Zeta Potential of Stanum Oxide (SnO2) on...

Effect of Zeta Potential of Stanum Oxide (SnO₂) on Electrophoretic Deposition (EPD) on Porous Alumina

Abstract:

Zeta potential analysis of stanum oxide (SnO₂) aqueous suspensions (pH7 to pH11) was performed prior to the electrophoretic deposition (EPD) of SnO₂. Deposition of SnO₂on porous alumina was obtained by applying the EPD technique carried out by applying voltage of 18V for duration of four minutes. It was found that the depositions SnO₂ suspended at pH 7 to pH 11 were successful. The relation between the SnO₂ deposition with SnO₂ pH and zeta potential values was established in which increased value of pH causes decreased value of zeta potential and decreased SnO₂ deposition through EPD technique.

You might also be interested in these eBooks

2nd International Conference on Sustainable Materials (ICoSM 2013)

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 795)

Pages:

334-337

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.795.334

Citation:

Cite this paper

Online since:

September 2013

Authors:

Siti Alwani Binti Ab. Aziz, Shahrin Hisham Amirnordin, Hamimah Abdul Rahman, Hasan Zuhudi Abdullah, Hariati Taib

Keywords:

Electrophoretic Deposition (EPD), SnO₂, Stanum Oxide, Zeta Potential

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] J.J.V. Tassel, C.A. Randall, Key Engineering Materials, 314 (2006) 167-173

Google Scholar

[2] A.R. Boccacini, J. Cho, J. A. Roether, B. J.C. Thomas, E. J. Minay and M.S.P Shaffer: Carbon 44 (2006) 3149-3160.

DOI: 10.1016/j.carbon.2006.06.021

Google Scholar

[3] L. Besra, C. Campson and M. Liu: Journal of Power Sources 173 (2007) 130-136

Google Scholar

[4] I. Corni, M. Cannio, M. Romagnoli, A.R. Boccacini: Material Research Bulletin 44 (2009) 1494-1501.

Google Scholar

[5] L. Besra and M. Liu: Progress in Material Science (2006) 3-20

Google Scholar

[6] R. Greenwood: Advances in Colloid and Interface Science 106 (2003) 55-81

Google Scholar

[7] H. Xu, I. P. Shapiro and P. Xiao: Journal of the European Ceramic Society 30 (2010) 1105–1114

Google Scholar

[8] D. Hanaor, M. Michelazzi, P. Veronesi, C. Leonelli, M. Romagnoli, & C. Sorrell: Journal of the European Ceramic Society 31 (2011) 1041– 1047.

DOI: 10.1016/j.jeurceramsoc.2010.12.017

Google Scholar

[9] C.C. Sorrell, H. Taib, T.C. Palmer, F. Peng Z. Xia and M. Mei, Biological and biomedical coatings handbook: Hydroxypatite and Biomedical coatings by Electrophoretic Deposition, 2011.

Google Scholar

[10] P. Sarkar, P. S.Nicholson: Journal of American Ceramic Society (1996) 1987–(2002)

Google Scholar