Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique

Narissara Mahathaninwong; Sirikul Wisutmethangoon; Thawatchai Plookphol; Jessada Wannasin; Suchart Chantaramanee

doi:10.4028/www.scientific.net/AMR.881-883.1597

Paper Titles

Microstructure and Property of Plasma Sprayed TiB₂ Wettable Coatings on Carbon Cathodes
p.1580

In Situ Observation of Inclusions Behavior in Molten State and Solidifying Interface of Tire Cord Steel
p.1584

Effects of Solid Solution Temperature on the Structure and Properties of TC16 Titanium Alloy Bars
p.1588

Effect of Semi-Solid Processing on Solidified Microstructure and Mechanical Properties of Rheo-Slurries A356 Sand Cast
p.1592

Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique
p.1597

Process Mineralogy Study on a Sandstone Copper Ore
p.1603

Geologic Feature of Shilipo Copper Deposit in Xinjiang
p.1607

Experimental Study on Recovery of Nickel from Nickel-Bearing Laterite
p.1611

The Characters of Bairendaba - Huanggangliang Deposits, Inner Mongolia, China
p.1616

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 881-883Elevated Temperature Tensile Behavior of Rheo-Cast...

Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique

Abstract:

Tensile properties of rheo-cast 7075-T6 Al alloy produced by Gas Induced Semi-Solid (GISS) technique was investigated as a function of temperatures from 25°C to 250 °C in order to assess the potent of high temperature applications. It was found that the ultimate tensile strength and yield strength of the alloy decreased steadily with increasing temperature. There was loss in strength of about 33% at 200°C and 46% at 250 °C comparing to the strength at room temperature. At T = 250 °C, the ultimate tensile strength and yield strength of the rheo-cast 7075-T6 Al alloy were higher than those of the wrought 7075-T651 Al alloy. Keyword: 7075 Al alloy; Gas Induced Semi Solid (GISS) technique; Elevated temperature tensile.

You might also be interested in these eBooks

Chemical, Material and Metallurgical Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 881-883)

Pages:

1597-1600

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.881-883.1597

Citation:

Cite this paper

Online since:

January 2014

Authors:

Narissara Mahathaninwong*, Sirikul Wisutmethangoon, Thawatchai Plookphol, Jessada Wannasin, Suchart Chantaramanee

Keywords:

7075 Al Alloy, Elevated Temperature Tensile, Gas Induced Semi Solid (GISS) Technique

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] S. Thanabumrungkul, S. Janudom, R. Burapa, P. Dulyapraphant, J. Wannasin, Trans. Nonferrous Met. Soc. China 20 (2010) s1016–s1021.

DOI: 10.1016/s1003-6326(10)60623-1

Google Scholar

[2] J. Wannasin, S. Janudom, T. Rattanochaikul, R. Canyook, R. Burapa, T. Chucheep, S. Thanabumrungkul, Trans. Nonferrous Met. Soc. China 20 (2010) s1010–s1015.

DOI: 10.1016/s1003-6326(10)60622-x

Google Scholar

[3] N. Mahathaninwong, T. Plookphol, J. Wannasin, S. Wisutmethangoon., Mater. Sci. Eng. A 532 (2012) 91–99.

DOI: 10.1016/j.msea.2011.10.068

Google Scholar

[4] ASM Metals handbook, Properties and Selection: Nonferrous Alloy and Special-Purpose Materials, Vol. 2, ASM International, USA, (1991).

DOI: 10.31399/asm.hb.v02.9781627081627

Google Scholar

[5] N. Mahathaninwong, T. Plookphol, J. Wannasin, S. Wisutmethangoon., Mater. Sci. Eng. A 556 (2012) 107–113.

Google Scholar

[6] A. Deschamps, F. Livet, Y. Breachet, Acta Mater. 47 (1999) 281–292.

Google Scholar