[1]
J. Adamus: Key Eng. Mat. Vol. 410-411 (2009), p.279.
Google Scholar
[2]
J. Adamus: Key Eng. Mat. vol. 344 (2007), p.185.
Google Scholar
[3]
T. Akamatsu, S. Ukita, K. Miyasaka, M. Shi: ISIJ International, Vol. 35/1 (1995), p.56.
Google Scholar
[4]
F-K. Chen, K-H. Chiu: J. Mater. Process. Tech. Vol. 170 (2005), p.181.
Google Scholar
[5]
Y. Goto, M. Shiraishi, M. Miyashita, S. Matsuyama: Proceedings of 5th Int. Conf. on Technology of Plasticity, Vol. 2 (1996), p.823.
Google Scholar
[6]
Y. Kosaka, S. P. Fox, K. Faller, S.H. Reichmann: Proceedings of the Minerals, Metals & Materials Society Symposium, (2004), p.67.
Google Scholar
[7]
K. Mori, T. Murao, Y. Harada: Proceedings of the 22nd Biennial Congress on IDDRG, Nagoya, (2002), p.25.
Google Scholar
[8]
K. Mori, T. Murao, Y. Harada: Annals of the CIRP, Vol. 52/1 (2003), p.237.
Google Scholar
[9]
T. Murao, K. Mori, Y. Harada: Ti-2003 Science and Technology, WILEY-VCH Verlag GmbH&Co. KGaA, vol. 1 (2004), p.627.
Google Scholar
[10]
J. Adamus: Analysis of cold forming of titanium parts. Edited by Czestochowa University of Technology, Czestochowa-Poland (2010), Monograph Series No 174 (in Polish).
Google Scholar
[11]
H. Bühler, H.W. Wagener: Bänder Bleche Rohre, Vol. 6 (1965): Teil. 1: H. 11, p.625 and 667 Teil 2: H. 12, p.677.
Google Scholar
[12]
H. Wilhelm: Bänder Bleche Rohre, Vol. 7 (1976), p.284.
Google Scholar
[13]
A. Chamanfar, R. Mahmudi: JOM February, Vol. 56 (2004), p.49.
Google Scholar
[14]
H. Inagaki, S. Kohara: ISIJ Int., Vol. 31/8 (1991), p.820.
Google Scholar
[15]
A. Starczewska, J. Materniak: Proceedings of 2nd Symp.: Titanium and its alloys: Processing and Application, Kraków-Poland, (1992), p.8.1 (in Polish).
Google Scholar
[16]
Z. Marciniak: Limit strains in sheet-metal forming (in Polish: Odkształcenia graniczne przy tłoczeniu blach). WNT, Warszawa-Poland (1967).
Google Scholar
[17]
Z. Marciniak, K. Kuczyński: Int. J. Mech. Sci. Vol. 9 (1967), p.609.
Google Scholar
[18]
G.M. Goodwin: Metall Italiana, Vol. 60 (1969), p.767.
Google Scholar
[19]
S.P. Keeler: Sheet Metal Industry, Vol. 45 (1969), p.633.
Google Scholar
[20]
S. Kataoka, J. Kihara, T. Aizawa: Journal of the Japan Society for Technology of Plasticity, Vol. 34/385 (1993), p.210.
Google Scholar
[21]
Y. Chen, K. Kibble, R. Hall, X. Huang: Materials and Design, Vol. 22 (2001), p.679.
Google Scholar
[22]
E. Czumaczenko, B. Kukuryk: Rudy i Metale, Vol. 51/ 2 (2006), p.78 (in Polish).
Google Scholar
[23]
J. Adamus, P. Lacki, M. Motyka: Inżynieria Materiałowa, Vol. 31/3 (2010), p.720.
Google Scholar
[24]
M. Motyka, J. Sieniawski: Archives of Materials Science and Engineering, Vol. 41/2 (2010), p.95.
Google Scholar
[25]
Z. Gabryszewski, J. Gronostajski: Mechanics of plastic forming processes (in Polish: Mechanika procesów obróbki plastycznej). PWN, Warszawa-Poland, (1991).
Google Scholar
[26]
T.W. Pełczyński, T.A. Pełczyński: Theory of plastic forming processes (in Polish: Teoria procesów obróbki plastycznej), part I: Mechanika procesów obróbki plastycznej. Edited by Warsaw University of Technology, Warszawa-Poland (1978).
Google Scholar
[27]
P. Lacki: Key Eng. Mat. Vol. 344 (2007), p.349.
Google Scholar
[28]
K. J. Bathe: Finite Element Procedures. Prentice Hall, Englewood Cliffs, NJ, (1996).
Google Scholar
[29]
K. J. Bathe: Proc. of the 12th ADINA Conference: Computers and Structures, 72 (1999), p.1.
Google Scholar
[30]
ADINA R&D Inc.: ADINA: Theory and modeling guide. ADINA R&D Inc., 2009.
Google Scholar
