Experimental and Numerical Analysis of Local Mechanical Properties of Drawn Part

Ján Slota; Miroslav Jurčišin; Emil Spišák

doi:10.4028/www.scientific.net/KEM.586.245

Paper Titles

The Effect of the Polyamide Reinforcement on Mechanical Properties of Fluorocarbon Rubbers Exposed in Aggressive Environment
p.230

Effect of Sterilization Processes on the Fiber/Matrix Interphase Properties of CF/PDMS Composite to be Used in Orthopaedics
p.234

Using the Multi-Parameter Fracture Mechanics for more Accurate Description of Stress/Displacement Crack Tip Fields
p.237

Local Mechanical Properties of Cast and Sintered High Cr-Alloyed Steel
p.241

Experimental and Numerical Analysis of Local Mechanical Properties of Drawn Part
p.245

Local Changes of Microhardness in Dissimilar Weld Joints after High Temperature Exposure
p.249

Characterization of the Interphase in Carbon Fiber Reinforced Polymeric Composite by a Modulus Mapping Test
p.253

Evaluation of Local Plastic Flow in the Vicinity of Indentation by the Means of DIC Applied on SEM Micrographs
p.257

Mechanical Properties of Single and Double-Layered PVA Nanofibers
p.261

HomeKey Engineering MaterialsKey Engineering Materials Vol. 586Experimental and Numerical Analysis of Local...

Experimental and Numerical Analysis of Local Mechanical Properties of Drawn Part

Abstract:

In this study, numerical and experimental results of deep drawing process were compared. Drawn part, used in automotive industry was drawn and measured using ARGUS measurement system, which works on a digital image correlation method (DIC). In order to optimize and verify accuracy of a numerical simulation results, this process was modeled in two codes which work on principle of the finite element method (FEM). Two types of FEM codes were used. Code which works on base of both, implicit and explicit time integration scheme, were used for calculation. Results were compared and discussed.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 586)

Pages:

245-248

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.586.245

Citation:

Cite this paper

Online since:

September 2013

Authors:

Ján Slota, Miroslav Jurčišin, Emil Spišák

Keywords:

Deep Drawing Process, Finite Element Method (FEM), Local Mechanical Properties, Optical Forming Analysis, Simulation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Ľ. Ambriško, L. Pešek, Determination the crack growth resistance of automotive steel sheets, Chemické listy 105 (2011) 767-768.

Google Scholar

[2] S. Hlebová, L. Pešek, T. Kandra, Comparison of deformation characteristics of the steel sheet in local and global area by the static loading using videoextensometry, Chemické listy 105 (2011) 577-579.

Google Scholar

[3] M. Mihaliková, Ľ. Ambriško, L. Pešek, Videoextensometric measuring of deformation process in automotive steel at two strain rate levels, Kovové Materiály 49 (2011) 137-141.

DOI: 10.4149/km_2011_2_137

Google Scholar

[4] Y. Hongxia, I.W. Burgess, J.B. Davison, R.J. Plank, Numerical simulation of bolted steel connections in fire using explicit dynamic analysis, Journal of Constructional Steel Research. 64 (2008) 515-525.

DOI: 10.1016/j.jcsr.2007.10.009

Google Scholar

[5] M.J. Saran, Comparison of elastic – plastic and rigid – plastic implicit FEM simulations in sheet forming applications, Journal of Materials Processing Technology 27 (1991) 279-300.

DOI: 10.1016/0924-0136(91)90058-m

Google Scholar

[6] N. Mitrovic et al., Experimental and numerical analysis of local mechanical properties of globe valve housing, Chemické listy 106 (2012) 491-494.

Google Scholar

[7] M. Milosevic et al., Measurement of local tensile properties of welded joint using digital image correlation method, Chemické listy 106 (2012) 485-488.

Google Scholar

[8] Information on http: /www. gom. com.

Google Scholar

[9] W. Fracz, F. Stachowicz, Aspect of verification and numerical optimization of sheet metal and numerical simulations process using the photogrammetric system, Pro-tech-ma (2012) 115-124.

Google Scholar