[1]
C.T. Sims, N.S. Stoloff, W.C. Hagel, Superalloys II, 2nd edition, Wiley-Interscience, USA, (1987).
Google Scholar
[2]
R.C. Reed, Superalloy. Fundamentals and applications, Cambridge University Press, Cambridge, (2006).
Google Scholar
[3]
M. Durand-Charre, The Microstructure of Superalloys. CRC Press, Amsterdam, (1997).
Google Scholar
[4]
T.M. Pollock, S. Tin, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties, J. Propul. Power. 22 (2006) 2 361-374.
DOI: 10.2514/1.18239
Google Scholar
[5]
J. Zhang, R.F. Singer, Hot tearing of nickel-based superalloys during directional solidification. Acta Mater. 50 (2002) 1869–1879.
DOI: 10.1016/s1359-6454(02)00042-3
Google Scholar
[6]
M. Zielińska, J. Sieniawski, M. Poreba, Microstructure and mechanical properties of high temperature creep resisting superalloy René 77 modified CoAl2O4, Archives of Mat. Sci. Eng. 28 (2007) 10 629-632.
Google Scholar
[7]
M. Zielinska, K. Kubiak, J. Sieniawski, Surface modification, microstructure and mechanical properties of investment cast superalloys, J. Achiev. Mat. Manufact. Eng. 35 (2009) 1 55-62.
Google Scholar
[8]
M.J. Donachie, Superalloys, A Technical Guide, 2nd edition, ASM Int., Materials Park, (2002).
Google Scholar
[9]
G.A. Rao, M. Kumara, M. Srinivasa, D.S. Sarma, Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718, Mat. Sci. Eng. A355 (2003) 114–125.
DOI: 10.1016/s0921-5093(03)00079-0
Google Scholar
[10]
Y. Zhang, Y. Huang, L. Yang, J. Lim, Evolution of microstructures a wide range of solidification cooling rate in a Ni-based superalloy, J. Alloy. Comp. 570 (2013) 70–75.
DOI: 10.1016/j.jallcom.2013.03.085
Google Scholar
[11]
M. Rahimian, S. Milenkovic, I. Sabirov, A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni based superalloy, Phil. Mag. Lett. 94 (2014) 2 86-94.
DOI: 10.1080/09500839.2013.870670
Google Scholar
[12]
J. Belan, Influence of cooling rate on gamma prime morphology in cast Ni – base superalloy, Acta Metall. Slovaca 17 (2011) 38-44.
Google Scholar
[13]
R. Kaiser, K. Williamson, C. O'Brien, S. Ramirez-Garcia, D.J. Browne, The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting, J. Mech. Beh. Bio. Mat. 24 (2013).
DOI: 10.1016/j.jmbbm.2013.04.013
Google Scholar
[14]
M. Gorny, E. Tyrała, Effect of cooling rate on microstructure and mechanical properties of thin-walled ductile iron castings, J. Mater. Eng. Perform. 22 (2013) 300-305.
DOI: 10.1007/s11665-012-0233-0
Google Scholar
[15]
R.W. Lewis, K. Ravindran, Finite element simulation of metal casting, Int. J. Numer. Meth. Eng. 47 (2000) 29–59.
DOI: 10.1002/(sici)1097-0207(20000110/30)47:1/3<29::aid-nme760>3.0.co;2-x
Google Scholar
[16]
D. Szeliga, K. Kubiak, W. Ziaja, R. Cygan, Influence of silicon carbide chills on solidification process and shrinkage porosity of castings made of nickel based superalloys, Int. J. Cast Met. Res. 27 (2014) 3 146-160.
DOI: 10.1179/1743133613y.0000000092
Google Scholar
[17]
D. Szeliga, K. Kubiak, A. Burbelko, M. Motyka, J. Sieniawski, Modeling of directional solidification of columnar grain structure in CMSX-4 nickel-based superalloy castings, J. Mater. Eng. Perform. 23 (2014) 3 1088-1095.
DOI: 10.1007/s11665-013-0820-8
Google Scholar
[18]
J. Antony, Design of experiments for engineers and scientists, 2nd edition, Elsevier, London, (2014).
Google Scholar
[19]
F. Binczyk, J. Sleziona, J. Cwajna, S. Roskosz, ATD and DSC analysis of nickel superalloys, Arch. Found. Eng. 8 (2008) 3 5-9.
Google Scholar
[20]
R.V. Lenth, Quick and easy analysis of unreplicated factorials, Technometrics 31 (1989) 4 469-473.
DOI: 10.1080/00401706.1989.10488595
Google Scholar
