Theoretical and Experimental Research on the Features of Cutting Force in Rotary Ultrasonic Face Milling of K9 Glass

Cheng Long Zhang; Ping Fa Feng; Jian Fu Zhang; Zhi Jun Wu; Ding Wen Yu

doi:10.4028/www.scientific.net/AMM.157-158.1674

Paper Titles

Design of a New Suspension Mechanism of Temporarily Installed Suspended Access Equipment
p.1650

Demerit-GWMA Control Chart with Fast Initial Response
p.1655

Finite Element Analysis for the Body Frame of Open-Front Press
p.1661

Study on X-Voronoi for Heterogeneous Wireless Sensor Networks
p.1665

Numerical Simulation and Experimental Study on Bonding Tool Design of Thermosonic Transducer for Flip-Chip Bonding
p.1670

Theoretical and Experimental Research on the Features of Cutting Force in Rotary Ultrasonic Face Milling of K9 Glass
p.1674

Evaluation of DBPs Formation Potential during Chlorination of Dissolved Organic Matter Fractions Isolated from Eutrophic Water
p.1680

Dynamic Characteristics of Belt Conveyor Based on Virtual Prototyping
p.1685

A High Efficient Variable Cross-Section Compound Ultrasonic Wiredrawing Vibration System
p.1689

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 157-158Theoretical and Experimental Research on the...

Theoretical and Experimental Research on the Features of Cutting Force in Rotary Ultrasonic Face Milling of K9 Glass

Abstract:

This study introduces rotary ultrasonic face milling (RUFM) process into flat surface machining of K9 glass. The effective cutting velocity, and cutting length of single diamond particle were presented in RUFM. The model of material removal for RUFM was developed through examining indentation fracture mechanics theory and material removal characteristics of brittle materials, and analyzing kinematics properties of diamond grits in RUFM. With a view of comparative researches, the cutting force of RUFM and diamond milling of K9 glass are compared. The experimental results tell that the relationship between the cutting depth (dc) and the ultrasonic amplitude (A) of the cutter has remarkable effects on cutting force, which was also discussed in the kinematic characteristics analysis section. The results also show that RUFM process can significantly reduce cutting force and the effects of process variable changes on cutting force in RUFM are weaker as dc is smaller than A. However, the reduction trends of the cutting forces in RUFM are very small and even increased in some process conditions, as dc is larger than A. It suggests that the cutting depth should be smaller than the ultrasonic amplitude of the cutter with RUFM process to obtain better processing performance.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 157-158)

Pages:

1674-1679

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.157-158.1674

Citation:

Cite this paper

Online since:

February 2012

Authors:

Cheng Long Zhang, Ping Fa Feng, Jian Fu Zhang, Zhi Jun Wu, Ding Wen Yu

Keywords:

Cutting Force, Face Milling, K9 Glass, Kinematics Characteristic, Material Removal Model, Rotary Ultrasonic Machining

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] J. P. Choi, B. H. Jeon, and B. H. Kim: J. Mater. Process. Technol. Vol. 191 (2007), pp.153-156.

Google Scholar

[2] Z. C. Li, Y. Jiao, T. W. Deines, Z. J. Pei, and C. Treadwell: Int. J. Mach. Tool. Manu. Vol. 45 (2005), pp.1402-1411.

Google Scholar

[3] Z. J. Pei, D. Prabhakar, P. M. Ferreira, and M. Haselkoran: J. Eng. Ind. Trans. ASME Vol. 117 (1995), pp.142-151.

Google Scholar

[4] Q. H. Zhang, C. L. Wu, J. L. Sun, and Z. X. Jia, P. I. Mech. Eng. B-J. Eng. Vol. 214 (2000), pp.805-810.

Google Scholar

[5] Z. C. Li, L. W. Cai, Z. J. Pei, and C. Treadwell: Int. J. Mach. Tool. Manuf. Vol. 46 (2006), pp.1469-1477.

Google Scholar

[6] W. M. Zeng, Z. C. Li, Z. J. Pei, and C. Treadwell: Int. J. Mach. Tool. Manuf. Vol. 45 (2005), pp.1468-1473.

Google Scholar

[7] N. Qin, Z. J. Pei, C. Treadwell, and D. M. Guo: J. Manu. Sci. Eng. Trans. ASME Vol. 131 (2009), p.041011.

Google Scholar

[8] Z. J. Pei, P. M. Ferreira, S. G. Kapoor, and M. Haselkorn: Int. J. Mach. Tool. Manuf. Vol. 35 (1995), pp.1033-1046.

Google Scholar

[9] S. Turchetta: Int. J. Adv. Manuf. Technol. Vol. 44 (2009), p.44: 854-861.

Google Scholar

[10] M. Zhou, B. K. A. Ngoi, M. N. Yusoff, and X.J. Wang: J. Mater. Process. Technol. Vol. 174 (2006), pp.29-33.

Google Scholar

[11] T. Matsumura, T. Hiramatsu, T. Shirakashi, and T. Muramatsu, J. Manuf. Process. Vol. 7 (2005), pp.102-108.

Google Scholar