Study on the Mechanical Properties of Backfill Cream-Body during Coal Mining

Shao Jie Chen; Wei Jia Guo; Hai Long Wang; Yi Tao Zhong

doi:10.4028/www.scientific.net/AMM.170-173.533

Paper Titles

Experimental Study on Determining Thermal Conductivity of Soil
p.516

The Application of Anchor Block in Large Soft Foundation Pit Excavation
p.520

ANSYS Simulating Analysis of a 3D High-Temperature Stope Reinforced in Advance with Fully Grouted Cable Bolts
p.525

Experimental Studies on Loads on a Single Pile under the Wave-Current Flow
p.529

Study on the Mechanical Properties of Backfill Cream-Body during Coal Mining
p.533

Fast Compressional Wave Scattering from Cylinder in Porous Media
p.537

Parameter Design of Anti-Slide Pile Control Method in Floor Heave
p.541

Study of Low Strength Pile Composite Foundation Deformation & Stability Calculation Method
p.545

Generalized Limit Equilibrium Method for Slope Stability Analysis
p.557

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 170-173Study on the Mechanical Properties of Backfill...

Study on the Mechanical Properties of Backfill Cream-Body during Coal Mining

Abstract:

In order to research the mechanical properties of the backfill cream-body under engineering conditions in the coal mine, the uniaxial compression test of backfill cream-body with different ages abtained from the filling locale of Daizhuang coal mine is conducted with MTS815.03 rock test system. The characteristics of backfill cream-body in the limited space and a certain environment are studied. Research shows that, the strength of backfill cream-body is high, but coagulability is bad and the discreteness of mechanical properties is different; Uniaxial compressive strength is 2.3 ~ 13.17 MPa and the average is 5.436 MPa; The elastic modulus is very low ,which is only 53.66 ~ 2614.35 MPa and the average is 645.14 MPa. The deformation is bigger when absorbing load; Poisson's ratio is low, which is only 0.0001 ~ 0.2112 and the average is 0.0265, which indicates that the backfill cream-body doesn't need the space of transverse deformation when bearing compression deformation; The mechanical parameters of backfill cream-body with different ages are fitted and regressed. Test results is important to control surface mining subsidence effectively, liberate the coal resources under buildings, railways and waterbodies and protect the ecological environment.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 170-173)

Pages:

533-536

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.170-173.533

Citation:

Cite this paper

Online since:

May 2012

Authors:

Shao Jie Chen, Wei Jia Guo, Hai Long Wang, Yi Tao Zhong

Keywords:

Backfill Cream-Body, Coal Mine, Experiment, Mechanical Property, Working Face

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] ZHANG Hai-jun, LI Ying and ZHAO Yong-xian: Nonferrous Metals Vol. 61 (2009), p.1

Google Scholar

[2] LIU Tong-you and CHAI Si-jing: China Mining Magazine Vol. 7 (1998), p.1

Google Scholar

[3] ZHOU Hua-qiang, HOU Chao-jiong and SUN Xi-kui: Journal of China University of Mining & Technology Vol. 33 (2004), p.154

Google Scholar

[4] The Laboratory and Field Test Standardization Committee of ISRM: The proposed method of rock mechanical test (China coal industry publishing house, China 1982).

Google Scholar

[5] ZHAO Cai-zhi, ZHOU Hua-qiang and QU Qun-di: Journal of China University of Mining & Technology Vol. 33 (2004), p.159

Google Scholar

[6] ZHENG Bao-cai, ZHOU Hua-qiang and HE Rong-jun: Journal o f Mining & Safety Engineering Vol. 23 (2006), p.460

Google Scholar