[1]
Xue Y, Zhang Z M, Wu Y J. Study on critical damage factor and the constitutive model including dynamic recrystallization softening of AZ80 magnesium alloy[J]. Science of Sintering, 2013, 45(2): 199-208.
DOI: 10.2298/sos1302199x
Google Scholar
[2]
Wu Y J, Zhang Z M, Li B C. Effect of aging on the microstructures and mechanical properties of AZ80 and ZK60 wrought magnesium alloys[J]. Science of Sintering, 2010, 42(2): 161-168.
DOI: 10.2298/sos1002161w
Google Scholar
[3]
Mordike B L, Ebert T. Magnesium: Properties—applications—potential[J]. Materials Science and Engineering: A, 2001, 302(1): 37-45.
Google Scholar
[4]
Lorimer G W, Yang Z, Li J P, et al. Review On Research And Development Of Magnesium Alloys[J]. Acta Metallurgica Sinica (English letters), 2009, 21(5): 313-328.
DOI: 10.1016/s1006-7191(08)60054-x
Google Scholar
[5]
Kamado S, Kojima Y, Ninomiya R, Kubota K. In: Lorimer GW, editor. Proceedings of the 3rd International Magnesium Conference, Manchester, UK: 1996. Institute of Materials; 1997. p: 327-332.
Google Scholar
[6]
Prasad Y. Processing maps: a status report[J]. Journal of Materials Engineering and Performance, 2003, 12(6): 638-645.
Google Scholar
[7]
Zhou H, Wang Q D, Ye B, et al. Hot deformation and processing maps of as-extruded Mg–9. 8 Gd–2. 7 Y–0. 4 Zr Mg alloy[J]. Materials Science & Engineering A, 2013, 576(Complete): 101-107.
DOI: 10.1016/j.msea.2013.03.090
Google Scholar
[8]
Xu S W, Zheng M Y, Kamado S, et al. Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5. 0 Zn–0. 9 Y–0. 16 Zr (wt. %) alloy[J]. Materials Science and Engineering: A, 2011, 528(12): 4055-4067.
DOI: 10.1016/j.msea.2011.01.103
Google Scholar
[9]
Del Valle J A, Ruano O A. Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy[J]. Materials Science and Engineering: A, 2008, 487(1): 473-480.
DOI: 10.1016/j.msea.2007.11.024
Google Scholar
[10]
Semiatin S L, Jonas J J. Formability and workability of metals: plastic instability and flow localization[M]. Materials Park, OH: American Society for Metals, (1984).
Google Scholar
[11]
Takuda H, Fujimoto H, Hatta N. Modelling on flow stress of Mg–Al–Zn alloys at elevated temperatures[J]. Journal of Materials Processing Technology, 1998, 80: 513-516.
DOI: 10.1016/s0924-0136(98)00154-x
Google Scholar
[12]
Ma M L, Zhang K, Li X G, et al. Hot deformation behavior of rare earth magnesium alloy without pre-homogenization treatment[J]. Transactions of Nonferrous Metals Society of China, 2008, 18(A01): 132-139.
DOI: 10.1016/s1003-6326(10)60189-6
Google Scholar
[13]
Rao K P, Prasad Y, Suresh K. Hot working behavior and processing map of a γ-TiAl alloy synthesized by powder metallurgy[J]. Materials & design, 2011, 32(10): 4874-4881.
DOI: 10.1016/j.matdes.2011.06.003
Google Scholar
[14]
Wu K, Liu G, Hu B, et al. Characterization of hot deformation behavior of a new Ni-Cr-Co based P/M superalloy[J]. Materials Characterization, 2010, 61(3): 330-340.
DOI: 10.1016/j.matchar.2009.12.013
Google Scholar
[15]
Zhang M J, Li F G, Wang S Y, et al. Effect of powder preparation technology on the hot deformation behavior of HIPed P/M nickel-base superalloy FGH96[J]. Materials Science and Engineering: A, 2011, 528(12): 4030-4039.
DOI: 10.1016/j.msea.2011.01.118
Google Scholar
