Study on the Property of Clinched Joint in Similar-Dissimilar Sheets about Titanium Alloy

Yue Zhang; Xiao Cong He; Fu Long Liu

doi:10.4028/www.scientific.net/AMM.723.888

Paper Titles

Design and Flow Simulation on a Variable Structure Plasma Reaction Chamber
p.868

Heat Conduction in a Thin Film which Reflects Size and Memory Effects Induced by an Ultra-Fast Laser
p.873

Numerical Simulation on the Whole Co-Extrusion Process of Tread Rubber
p.878

Study on the Manufacturing Process of Polymer Microfluidic Chip with Integrated Cu Micro Array Electrode
p.884

Study on the Property of Clinched Joint in Similar-Dissimilar Sheets about Titanium Alloy
p.888

The Analysis for Chemico-Mechanical Practices Using in Polymer Material Machining
p.892

Using the Lattice Boltzmann Method to Simulate the Heat Conduction in a Thin Film Induced by Ultra-Fast Laser
p.896

Experiment on Recovery of Multi-Metal from Zinc Volatile Kiln Slag in Xining
p.901

Research on Camber Correction Method of Heavy Plate
p.906

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 723Study on the Property of Clinched Joint in...

Study on the Property of Clinched Joint in Similar-Dissimilar Sheets about Titanium Alloy

Abstract:

In order to analysis the mechanical properties of clinched joints of titanium alloy, three types of the clinched joints in similar and dissimilar sheets called , TA1-TA1,TA1-H62 and Al5052-TA1 were respectively studied through the method of experiment. Tensile shear tests were carried out to examine the mechanical behavior of them, the failure modes also been analysised. It can be seen in the experiment that the failure mode of the three kinds of joints were fracture of upper sheet at the neck with the minimum thickness. Comparison shows that improve the plasticity of the lower sheet can improve the quality of joint when the upper sheet was titanium alloy sheet.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 723)

Pages:

888-891

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.723.888

Citation:

Cite this paper

Online since:

January 2015

Authors:

Yue Zhang, Xiao Cong He*, Fu Long Liu

Keywords:

Clinching, Mechanical Property, Tensile-Shear Tests, Titanium Alloy

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Jacek Mucha, Joining the car-body sheets using clinching process with various thickness and mechanical property arrangements [J], Archives of Civil and Mechanical Engineering，2011: 135-148.

DOI: 10.1016/s1644-9665(12)60179-4

Google Scholar

[2] Varis J P. The suitability of clinching as a joining method for high-strength structural steel [J]. Journal of Materials Processing Technology, 2003, 132(1/2/3): 242-249.

DOI: 10.1016/s0924-0136(02)00933-0

Google Scholar

[3] Carboni M, Beretta S, Monno M. Fatigue behavior of tensile-shear loaded clinched joints [J]. Engineering Fracture Mechanics73, 2006: 178-190.

DOI: 10.1016/j.engfracmech.2005.04.004

Google Scholar

[4] Yang Huiyan, He Xiaocong, Ding Yanfang. Study of clinched joint in similar and dissimilar sheets about copper alloy [J]. Hot Working Technology, 2014: 43(7): 34-36.

Google Scholar

[5] Yang Huiyan, He Xiaocong, Deng Chengjiang. Experimental and Numerical Investigations on the Behavior of Clinched Connection in Aluminum Alloy[J]. 2013, 42(15): 93-96.

Google Scholar

[6] Zhou Yunjiao, Lan Fengchong, Huang Xinhong. Multi-objective optimization of geometry of clinching tools for steel-aluminum blank sheets [J]. 2011, 40(6): 86-99.

Google Scholar