[1]
van Basshuysen, R.; Schäfer, F. (Hrsg.): Handbuch Verbrennungsmotor – Grundlagen, Komponenten, Systeme, Perspektiven. Vieweg-Verlag, Wiesbaden, (2012).
DOI: 10.1007/978-3-658-04678-1
Google Scholar
[2]
Jesus Filho, E. S., et al.: P/M Valve Seat Inserts: Machinability and Mechanical Characterisation. No. 2005-01-0717. SAE Technical Paper, (2005).
DOI: 10.4271/2005-01-0717
Google Scholar
[3]
Klocke, F., Brinksmeier, E., Weinert, K.: Capability profile of hard cutting and grinding processes, CIRP Annals-Manufacturing Technology 54.2:22-45, (2005).
DOI: 10.1016/s0007-8506(07)60018-3
Google Scholar
[4]
N. N.: Ventiltrieb – Systeme und Komponenten. Mahle GmbH (Hrsg). Wiesbaden: Vieweg -Verlag (2013).
Google Scholar
[5]
Koppka, F.: A contribution to the maximization of productivity and workpiece quality of the reaming process by analyzing its static and dynamic behavior, Shaker Verlag, Aachen, (2009).
Google Scholar
[6]
O. Bhattacharryya, S.G. Kapoor, R.E. DeVor: Mechanistic model for the reaming process with emphasis on process faults, International Journal of Machine Tools and Manufacture, 46 (2006), 836-846.
DOI: 10.1016/j.ijmachtools.2005.07.022
Google Scholar
[7]
O. Bhattacharryya, M.B. Jun, S.G. Kapoor, R.E. DeVor: The effects of process faults and misalignment on the cutting force system and hole quality in reaming, International Journal of Machine Tools and Manufacture, 46 (2006), 1281-1290.
DOI: 10.1016/j.ijmachtools.2005.11.002
Google Scholar
[8]
Hauer, T.: Modellierung der Werkzeugabdrängung beim Reiben – Ableitung von Empfehlungen für die Gestaltung von Mehrschneidenreibahlen. Shaker Verlag, Aachen, (2012).
Google Scholar
[9]
Abele, E, Bölling, C.: Modellierung der geometrischen Eingriffsbedingungen bei der Ventilsitzbearbeitung am Zylinderkopf, Werkstattstechnik online 11/12 (2014) 735-740.
DOI: 10.37544/1436-4980-2014-11-12-735
Google Scholar
[10]
Li, Y., et al.: Force modeling for cylindrical plunge cutting, Int. J Adv Manuf Technol, 16:863-870; (2000).
Google Scholar
[11]
Abele, E., Elsenheimer, J., Hohenstein, J., Tschannerl, M.: Influence of drill dynamics on bore quality, Annals of the CIRP 54 (2005) 83-86.
DOI: 10.1016/s0007-8506(07)60055-9
Google Scholar
[12]
Biermann, D.; Kersting, M.; Surmann, T.: Simulation der Prozessdynamik beim Einlippenbohren, Werkstattstechnik online 11/12 (2007) 879-883.
DOI: 10.37544/1436-4980-2007-11-12-879
Google Scholar
[13]
Ellermeier, A.: Methode zur Standwegprognose für lange Vollhartmetall-Spiralbohrer zum Tiefbohren auf Bearbeitungszentren, Shaker Verlag, Aachen, (2008).
Google Scholar
[14]
Tschannerl, M.: Ein Beitrag zur Qualitätssteigerung beim Bohren mit VHM-Spiralbohrern unter Berücksichtigung radialer Schwingungen und Kräfte. Shaker Verlag, Aachen, (2007).
DOI: 10.37544/1436-4980-2008-1-2-53
Google Scholar
[15]
Bayly, P. V. et al.: Analysis of Tool Oscillation and Hole Roundness Error in a Quasi-Static Model of Reaming. In Journal of Manufacturing Science and Engineering 123 (2001), 387.
DOI: 10.1115/1.1383551
Google Scholar
[16]
Bölling, C.; Güth, S.; Abele, E.: Control of Uncertainty in High Precision Cutting Processes. Reaming of Valve Guides in a Cylinder Head of a Combustion Engine. Uncertainty in Mechanical Engineering II. Trans Tech Publications (2015) 153–161.
DOI: 10.4028/www.scientific.net/amm.807.153
Google Scholar
[17]
Bölling, C., Kuhne, M., Abele, E.: Modeling of Process Forces with Consideration of Tool Wear for Machining of Sintered Steel Alloy for Application to Valve Seat in a Combustion Engine. Production Engineering: WGP, Springer Verlag, Heidelberg, 11, 4-5 (2017).
DOI: 10.1007/s11740-017-0759-y
Google Scholar