Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Cooperative Pricing Decision Model in Supply Chain
p.789
The Modularity and Connectivity of the Master Structure of Complex Product Families
p.794
Preparation of Water-Resistant Electrode Coating with Palmitic Acid by Microwave Reaction
p.800
Thermoelectric Characteristics of Pb- and La-Doped Bi2Ba2Co2OY Ceramics
p.804
The Microstructure and Erosion Wear Performance of HVOF-Sprayed Cr3C2-NiCr Coatings with Different Feedstock Powder
p.809
Transient Dynamic Analysis and Optimization of Chamber
p.813
Research on the Reshaping Device for Ridge-Till and No-Till Seeders
p.817
The Mechanical Behavior of Aluminium Alloy Quenching Process
p.822
Effect of Ammonia on Preparation of Ammonium Polyphosphate
p.828

The Microstructure and Erosion Wear Performance of HVOF-Sprayed Cr3C2-NiCr Coatings with Different Feedstock Powder

Article Preview

Abstract:

In the present study, Cr3C2-NiCr coatings have been deposited using high velocity oxy-fuel (HVOF) system from two commercially available powders with different NiCr contents (25 and 40 wt.%) and manufactured by different process (the blended and agglomerated-sintered). Coating microstructures were studied by scan electron microscopy (SEM). Hardness, erosive wear performance of the two coatings was measurement. The influence of powder characteristics on the microstructure and erosive performance of Cr3C2-NiCr coatings was investigated. The erosion mechanism of Cr3C2-NiCr coatings was examined through the surface morphology of the eroded coatings. The results indicated that Cr3C2-NiCr coating hardness decreased from 822 to 702 Hv with increasing NiCr content from 25 wt.% to 40 wt.%, however, Cr3C2-40NiCr coating exhibits better erosive wear resistance in comparison to Cr3C2-25NiCr coating.

You might also be interested in these eBooks
Machinery, Materials Science and Engineering Applications, MMSE2011 View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 228-229)

Pages:

809-812

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.228-229.809

Citation:

Cite this paper

Online since:

April 2011

Authors:

Hong Tao Wang, Gang Chang Ji, Qing Yu Chen, Xue Fei Du, Wei Fu

Keywords:

Cr3C2/NiCr Coating, Erosive Wear, High Velocity Oxy-Fuel, Microstructure

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] B.Q. Wang and Z.R. Shui: Wear. Vol. 253 (2002), p.550.

Google Scholar

[2] B.G. Seong, S.Y. Hwang, and K.Y. Kim: Surf. Coat. Technol. Vol. 126 (2000), p.256.

Google Scholar

[3] H.J. Kim, Y.G. Kweon, and R.W. Chang: J. Therm. Spray Technol. Vol. 3 (1994), p.169.

Google Scholar

[4] Q. Wang, Z.H. Chen, and Z.X. Ding: Tribol. int. Vol. 42 (2009), p.1046.

Google Scholar

[5] M.F. Morks, Y. Gao, and N.F. Fahim: Surf. Coat. Technol. Vol. 199 (2005), p.66.

Google Scholar

[6] G. Sundararajan, K.U.M. Prasad, and D.S. Rao: J. Mater. Eng. Vol. 7 (1998), p.343.

Google Scholar

[7] S. Wirojanupatump, P.H. Shipway, and D.G. McCartney: Wear, Vol. 249 (2001), p.829.

Google Scholar

[8] C.J. Li, H. Yang, and H. Li: Mater. Manuf. Process. Vol. 14 (1999), p.383.

Google Scholar

[9] G.C. Ji, C. J Li, and Yu-Yue Wang: J. Therm. Spray Technol. Vol. 16 (2007), p.557.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved