Paper Titles

New Developments in Powder Technology
p.1

30 Years of Modeling of Microstructure Evolution during Casting Solidification
p.9

Volume-CAD: An Integrated Environment for Virtual Manufacturing and Structural Analysis
p.17

Influence of the Casting Process on the Properties of Al Based Automotive Components
p.25

Severe Plastic Deformation Technologies for Ultra Fine Grained Alloys
p.33

A Vision of Wire Rod Rolling Technology for the Twenty First Century
p.39

A Re-Examination of the Toughness and Fatigue Performance of PM Steels
p.47

Development of Aluminium Alloys and Metal Matrix Composites by Powder Metallurgy
p.51

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 23New Developments in Powder Technology

New Developments in Powder Technology

Article Preview

Abstract:

In this paper we try to summarize the research activities of the PM group in the University Carlos III of Madrid. This research group is highly devoted to PM activities covering different fields (both under the point of view of the materials and the processes). In the PM lab powders can be produced by spray pyrolysis, mechanical alloying and water/gas atomization. These powders can be processed by pressing and sintering, powder injection moulding, isostatic pressing,… Sintering facilities cover vacuum and gas controlled sintering. Regarding the materials, in the group we have different research lines covering low alloyed steels, stainless steels, HSS, ferrites, metal matrix composite (Al and Fe base), Ti, intermetallics, ceramics with functional and structural propierties, … In this paper we describe slightly some of the recent developments produced in the group which is not exhaustive (are there a few more) but representative about we are doing at present.

You might also be interested in these eBooks

Materials and Technologies

Info:

Periodical:

Advanced Materials Research (Volume 23)

Pages:

1-8

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.23.1

Citation:

Cite this paper

Online since:

October 2007

Authors:

José Manuel Torralba, Elena Gordo Odériz, Antonia Jiménez-Morales, Elisa Maria Ruiz-Navas, Mónica Campos, María Eugenia Rabanal, D. Ruiz-Amador

Keywords:

Aluminum (Al), Iron Base Composite, Low Alloyed Steel, Mechanical Alloying (MA), MIM, Phosphor Materials, Spray Pyrolysis

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] Y. Yu, B. Lindquist, J. Tengzelius. Powder Metallurgy 2004 Vol. 47 No. 4. pp.304-308.

[2] A. Salak. Powder Metall. Int. Vol. 12. No. 2. P. 72-75. (1980).

[3] H. Danninger, R. Pöttschacher, S. Bradac, A. Salak and J. Seyrkammer. Powder Metall. Vol. 48, No. 1, (2005) pp.23-32.

DOI: 10.1179/003258905x37567

[4] J. Sicre, M. Campos, T. Marcu, JM Torralba, Modification of Low alloyed steels by manganese additions, accepted in Materials Science Forum.

DOI: 10.4028/www.scientific.net/msf.534-536.697

[5] V. Stoyanova, G. Straffelini, A. Molinari. Powder Metall. Progress Vol. 4, No. 4, (2004) pp.243-255.

[6] S. Zhang, Key Eng. Mater. 138-140 (1998) 521-543.

[7] P. Ettmayer, H. Kolaska, W. Lengauer, K. Dreyer, Int. J. Refract. Metals Hard Mater. 13 (1995) 343-351.

DOI: 10.1016/0263-4368(95)00027-g

[8] E. Gordo, F. Velasco, N. Antón, J.M. Torralba, Wear 239 (2000) 251-259.

[9] E. Gordo, E. Parra, E.M. Ruiz-Navas, J.M. Torralba, New Dev. Powder Technol. III (2001) 1355-1360.

[10] J.B. Fogagnolo, E.M. Ruiz-Navas, M.H. Robert, J.M. Torralba, Scripta Materialia 47 (2002) 243-248.

DOI: 10.1016/s1359-6462(02)00133-1

[11] C. Suryanarayana, Prog. Mater. Sci. 46 (2001) 1-184.

[12] G. Levi, W. D. Kaplan, M. Bamberger, Mat. Letters, 35 (1998), 344-50.

[13] B. Gómez, E. Gordo, J.M. Torralba. Mat Sci. Eng. A. Article in press (accepted May 2006).

[14] ML. Delgado ML, E.M. Ruiz-Navas, E. Gordo, JM Torralba, J. of Materials Proc. Tech., 162 (2005) 280-285.

[15] J.B. Fogagnolo, M.H. Robert, E.M. Ruiz-Navas, J.M. Torralba, Journal of Materials Science 39 (2004) 127-132.

[16] Randall M. German. Injection Molding of Metals and Ceramics, Metal Powder Industries Federation. (1997).

[17] K. M. Kulkarni. Advanced in Powder Metallurgy, vol. 3, (1990).

[18] S.K. Roy, D.D. Upadhyaya. PMI, vol. 24 (2), (1992).

[19] Guo-Jiun Shu, Kuen-Shyang. Materials Trans., vol. 24 (10), (2004) 2999-3004.

[20] J.M. Contreras, A. Jiménez-Morales, J.M. Torralba Influence of the morphology and the particle size on the processing by metal injection moulding (MIM) of bronze 90/10 powders, accepted in Materials Science Forum.

[21] M.E. Rabanal, L. Gómez, A. Khalifa, L. Mancic, O. Milosevic and J.M. Torralba, Gd2O3: Eu System: Structural Study of the Influence of Luminescence Center Concentration, accepted in Materials Science Forum.

DOI: 10.4028/www.scientific.net/msf.534-536.1393

[22] O. Milosevic, L. Mancic, M.E. Rabanal, J.M. Torralba, B. Yang, P. Townsend, Journal Electrochemical Society 152(9) (2005) G707-G713.

[23] M.E. Rabanal, C. Morales, J.M. Torralba, L. Mancic and O. Milosevic, J. of the European Ceramic Society 25(12) (2005) 2023-(2027).

DOI: 10.1016/j.jeurceramsoc.2005.03.183