[1]
M. Summer, Robot capability test and development of industrial robot positioning system for the aerospace industry. In: SAE 2005 AeroTech Congress & Exhibition, Grapevine, TX, SAE Technical Papers 2005-01-3336, (2005).
DOI: 10.4271/2005-01-3336
Google Scholar
[2]
W. Khalil, E. Dombre, Modeling, Identification and Control of Robots, Hermes Science Publications, (2002).
Google Scholar
[3]
C. Lecerf-Dumas, S. Caro, M. Cherif, S. Garnier, B. Furet, A New Methodology for Joints Stiffness Identification of Serial Robots, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2010) Taipei Editorial System, (2010).
DOI: 10.1109/iros.2010.5652140
Google Scholar
[4]
J. Angeles, Fundamentals of Robotic Mechanical Systems, Theory, Methods and Algorithms, Third Edition, Springer, New York, 2007. (First Edition published in 1997).
Google Scholar
[5]
P. Bourdet, L. Mathieu, C. Lartigue, A. Ballu, The concept of the small displacement torsor in metrology, Series on Advances in Mathematics for Applied Sciences, Advanced mathematical tools in metrology II, 40, pp.110-122, World Scientific, (1996).
DOI: 10.1142/9789812793836_0013
Google Scholar
[6]
F. Girardin, Etude de l'usinage de matériaux performants et surveillance de l'usinage, L'Institut National de Sciences Appliquées de Lyon, (2010).
Google Scholar
[7]
D. A. Axinte, N. Gindy, K. Fox, I. Unanue, Process monitoring to assist the workpiece surface quality in machining, International Journal of Machine Tools & Manufacture, 44, p.1091–1108, (2004).
DOI: 10.1016/j.ijmachtools.2004.02.020
Google Scholar
[8]
Liang, J. and Bi, S. Design and experimental study of an end effector for robotic drilling, International Journal of Advanced Manufacturing Technology, 50, pp.399-407, 2010, doi : 10. 1007/s00170-009-2494-9.
DOI: 10.1007/s00170-009-2494-9
Google Scholar
[9]
C.F. Bisu, J-Y K'nevez, P. Darnis, R. Laheurte, A. Gérard, New method to characterize a machining system: application in turning, International Journal of Material Forming. 2, (2), pp.93-105, 2009, DOI : 10. 1007/s12289-009-0395-y.
DOI: 10.1007/s12289-009-0395-y
Google Scholar
[10]
C. F. Bisu, M. Zapciu, A. Gérard, V. Vijelea, M. Anica, New approach of envelope dynamic analysis for milling process, Eighth International Conference on High Speed Machining, Metz, France, Dec. 8-10, (2010).
DOI: 10.1007/s00170-011-3814-4
Google Scholar
[11]
Shin-Ichi Metsouoka, Kazunori Schimizu, Nobuyuki Yamazaki, Yashunori Oki, High speed end milling of an articulated robot and its characteristics, Journal of Material Processing Technology, 95, (1-3), pp.83-89, (1999).
DOI: 10.1016/s0924-0136(99)00315-5
Google Scholar
[12]
I. Zaghbany, V. Songmene, Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis, International Journal of Machine Tools & Manufacture, 49, (12-13), p.947–957, (2009).
DOI: 10.1016/j.ijmachtools.2009.06.010
Google Scholar
[13]
R. Yan, R. X. Gao, Multi-scale enveloping spectrogram for vibration analysis in bearing defect diagnosis, Tribology International, 42, p.293–302, (2009).
DOI: 10.1016/j.triboint.2008.06.013
Google Scholar
[14]
T. Kalvoda; Y.R. Hwang; A cutter tool monitoring in machining process using Hilbert-Huang transform,; In: International Journal of Machine Tools and Manufacture, 50, (5), pp.495-501, (2010).
DOI: 10.1016/j.ijmachtools.2010.01.006
Google Scholar
[15]
V. Gagnol, T-P. Le, P. Ray, Modal identification of spindle-tool unit in high-speed machining, Mechanical Systems and Signal Processing, 25, (11), pp.2388-2398, 2011, doi: 10. 1016/j. ymssp. 2011. 02. 019.
DOI: 10.1016/j.ymssp.2011.02.019
Google Scholar
[16]
X. Wang, Numerical Implementation of the Hilbert Transform, Thesis, University of Saskatchewan, Saskatoon, (2006).
Google Scholar