The Effects of Nd on Lead Anode for Zinc Electrowinning

Article Preview

Abstract:

A detailed investigation of the effects of Nd on the microstructure, mechanical properties and electrochemical properties of lead anode in 160g.L-1 at 35°C was carried out. Galvanostatic polarization and Chronopotentiometry (CP) were used to study the electrochemical behavior ( such as anodic potential, corrosion rate and the composition of passive film) of the Pb and Pb-Nd anodes. The metallographic structure and passive film morphology of Pb and Pb-Nd anodes were observed and analyzed using polarizing microscope and scanning electronic microscopy (SEM), respectively. The experimental results show the grains become smaller and aggregation of PbxNdy become severe as the content of Nd increases. The addition of Nd enhances the formation of PbO2, inhibits the formation of PbSO4 and PbO and reduces the anodic potential. However, Holes presenting on rough passive film of high Nd content Pb-Nd anodes accelerate the corrosion.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 581-582)

Pages:

1115-1118

Citation:

Online since:

October 2012

Export:

Price:

[1] A. Felder, R.D. Prengaman, Lead alloys for permanent anodes in the nonferrous metals industry. JOM-US. 58(10) (2006) 28-31.

DOI: 10.1007/s11837-006-0197-3

Google Scholar

[2] A. Tizpar, Z. Ghasemi, Influence of silver on the anodic corrosion and gas evolution of Pb-Sb-As-Se alloys as positive grids in lead acid batteries. APPL SURF SCI. 252(22) (2006) 7801-7808.

DOI: 10.1016/j.apsusc.2005.09.020

Google Scholar

[3] B. Monahov, D. Pavlov, D. Petrov, Influence of Ag as alloy additive on the oxygen evolution reaction on Pb/PbO2 electrode. J POWER SOURCES. 85(1) (2000) 59-62.

DOI: 10.1016/s0378-7753(99)00383-3

Google Scholar

[4] A. Hrussanova, L. Mirkova, Influence of temperature and current density on oxygen overpotential and corrosion rate of Pb-Co3O4, Pb-Ca-Sn, and Pb-Sb anodes for copper electrowinning: Part I. HYDROMETALLURGY. 72(3-4) (2004) 205-213.

DOI: 10.1016/j.hydromet.2003.07.004

Google Scholar

[5] Y. Li, L. X. Jiang, X. J. Lv, et al, Oxygen evolution and corrosion behaviors of co-deposited Pb/Pb-MnO2 composite anode for electrowinning of nonferrous metals. HYDROMETALLURGY. 109(3-4) (2011) 252-257.

DOI: 10.1016/j.hydromet.2011.08.001

Google Scholar

[6] Y.B. Zhou, C.X. Yang, W.F. Zhou, et al, Comparison of Pb-Sm-Sn and Pb-Ca-Sn alloys for the positive grids in a lead acid battery. J ALLOY COMPD. 365(1-2) (2004) 108-111.

DOI: 10.1016/s0925-8388(03)00649-2

Google Scholar

[7] Liu Fang-qing, Zhang Xin-hua, Ma Min, et al, Effect of Pr and Nd on the Impedance property of anodic Pb(II) film in sulfuric acid solution. Journal of FUDAN University (Natural Science). 47(5) (2008) 650-662.

Google Scholar

[8] Hong bo, Jiang Liang-xing, Lv Xiao-jun, et al, Influence of Nd on Pb-Ag alloy for zinc electrowinning. Journal of the Chinese Journal of Nonferrous Metals. 22(4) (2012) 1126-1131.

Google Scholar

[9] D. Pavlov, CN Poulieff, E. Klaja, et al, Dependence of the composition of the anodic layer on the oxidation potential of lead in sulfuric acid. J ELECTROCHEM SOC. 116 (1969) 316-319.

DOI: 10.1149/1.2411836

Google Scholar

[10] D. Pavlov, N. Iordanov, Growth Processes of the Anodic Crystalline Layer on Potentiostatic Oxidation of Lead in Sulfuric Acid. J ELECTROCHEM SOC. 117 (1970) 1103-1109.

DOI: 10.1149/1.2407747

Google Scholar

[11] D. Pavlov, Processes in solid state at anodic oxidation of a lead electrode in H2SO4 solution and their dependence on the oxide structure and properties. Electrochim Acta. 23(9) (1978) 845-854.

DOI: 10.1016/0013-4686(78)87005-4

Google Scholar