Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Study on Cr-Al2O3 Nano Composite Electrodeposition in Cr(III) Plating Bath
p.181
Homotopy Perturbation Method for Analysis Nonlinear Vibration of Double-Walled Carbon Nanotubes
p.186
New Preparation for Amorphous/Nanocrystalline Ni-Mo Alloys by Electrodeposition
p.191
Nature Study of Temperature Phase Transitions in Bitumen Composites with Polymeric Hydrocarbon Plasticizer
p.197
Mean and Instantaneous Thermal Expansion of Uncoated and Ti Coated Diamond/Copper Composite Materials
p.202
Water Absorption and Tensile Strength of Coconut Filter Fibers/Polypropylene Composites
p.207
A CDM Model and its FE Implementation for 2D C/SiC Composite under Tension and Shear Loads
p.213
Biological Denitrification Using Slow-Release Carbon Source Composite Materials as Solid Carbon Source and Biofilm Carrier
p.218
Electrical Properties of La0.7Sr0.3CuO3-δCathode Based on SDC-YSZ Composite Electrolyte
p.224

Mean and Instantaneous Thermal Expansion of Uncoated and Ti Coated Diamond/Copper Composite Materials

Article Preview

Abstract:

Heat sink materials not only should have higher thermal conductivity, but also have smaller difference of thermal expansion with cooled material. diamond/copper composites were made by the powder metallurgy method. Vacuum slowly vapor deposition technique was employed to deposit a titanium film on diamond particles before mixing with Cu powder in order to improve the bonding strength between Cu and diamond particles during sintering. The thermal expansion of diamond/Cu d composite was measured in the temperature range from 50 to 600 °C. The results show that the titanium film on diamond improves the interfacial bonding and reduces the coefficient of thermal expansion (CTE) of Cu/diamond composites. The CTE of diamond/Cu composites decreases with increasing diamond volume fraction as the results of mixture rule and the intense restriction effect of diamond reinforcement on the copper matrix. The residual stresses and pores in the composites affect instantaneous thermal expansion of diamond/Cu composites.

You might also be interested in these eBooks
Advanced Materials Science and Applied Mechanics View Preview

Info:

Periodical:

Advanced Materials Research (Volume 702)

Pages:

202-206

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.702.202

Citation:

Cite this paper

Online since:

May 2013

Authors:

Qing Yun Wang, Wei Ping Shen, Ming Liang Ma

Keywords:

Coating, Diamond/Copper Composites, Thermal Expansion, Ti

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] WILDNER H, KNIPPSCHEER S, LANDGRAF J, BOLLINA R: Manufacturing and applications of diamond composites for thermal management, Dübendorf: High performance diamond composites for TM, (2006).

Google Scholar

[2] NISHIBAYASHI Y, U.S. Patent 6,270,848 B1, (2001).

Google Scholar

[3] EKSTRON T, ZHRNG J, KLOUB K, GORDEEV S K, DANCHUKOVA L V, U.S. Patent 6,914,025 B2, (2005).

Google Scholar

[4] EKIMOV E A, SUETIN N V, POPOVICH A F, RALCHEMKO V G: Diamond & Related Materials Vol. 17 (2008), p.838

Google Scholar

[5] YOSHIDA K, MORIGAMI H: Microelectronics Reliability Vol. 44 (2004), p.303

Google Scholar

[6] SCOTT O M, NICHOLAS M: J Mater Sci Vol. 10 (1975),p.1833

Google Scholar

[7] BATTABYAL M, BEFFORT O, KLEINER S, VAUCHER S, ROHR L: Damond. Relat. Mater Vol. 17 (2008), p.1438

Google Scholar

[8] SCHUBER T H, TRINDADE B, WEIβa ̈RBER T, KIEBACK B: Mater .Sci .Eng A Vol. 475 (2008), (1) p.39

Google Scholar

[9] WEBER L, TAVANGAR R: Scripta Materialia Vol. 57 (2007), p.988

Google Scholar

[10] ZHAO Yu-cheng, ZOU Qin, YAN Ning, WANG Ming-zhi, WANG Yan-hui: Diamond＆ Abrasives Engineering Vol. 155 (2006), (5) p.17

Google Scholar

[11] TURNER P S: Res NBS Vol. 37 (1946), p.50

Google Scholar

[12] KERNER E H: Proc. Phys. Soc Vol. B69 (1956), p.13

Google Scholar

[13] SHU Kuen-ming, TU G C: Mater. Sci. Eng A Vol. 349 (2003), p.236

Google Scholar

[14] HUBER T, DEGISCHER H P, LEFRANC G , SCHMITT T: Comp. Sci. Technol Vol.66 (2006), p.2206

Google Scholar

[15] SHEN Y L: Sci. Eng A Vol. 252 (1998), p.75

Google Scholar

[16] SHEN Y L: Mater Sci Eng A Vol. 237 (1997), p.8

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved