Mechanical, Metallurgical Characteristics and Corrosion Properties of Equal Channel Angular Pressing of Duplex Stainless Steel

P.M. Ajith; P. Sathiya; Kondaiah Gudimetla; B. Ravishankar

doi:10.4028/www.scientific.net/AMR.717.9

Paper Titles

Effects of Process Parameters on Material Removal Rate and Arithmetic Surface Roughness in Rubber Carbon Black Cutting by EDM
p.3

Mechanical, Metallurgical Characteristics and Corrosion Properties of Equal Channel Angular Pressing of Duplex Stainless Steel
p.9

Optical Properties of Cu_0.95Pt_0.05Fe_0.97Sn_0.03O₂ for p-Type Transparent Conducting Oxide Materials
p.15

Recycling of Kaolin Processing Waste as Aggregate in Asphalt Concrete
p.21

Phase Structure, Microstructure and Electrical Properties of BiMnO₃-Doped (Na_0.515K_0.485)_0.96Li_0.04(Nb_0.8Ta_0.2)O₃ Lead-Free Ceramics
p.27

Hydrothermal Synthesis of LiMnO₂ with Orthorhombic Structure as Cathode Materials
p.33

A New Synthesis of BaHPO₄ Precipitated by BaCO₃-H₃PO₄-NaOH System at Room Temperature
p.37

A Simple Route to Synthesize Ferromagnetic Binary Calcium Iron Pyrophosphate CaFeP₂O₇ Using Aqueous-Acetone Media
p.44

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 717Mechanical, Metallurgical Characteristics and...

Mechanical, Metallurgical Characteristics and Corrosion Properties of Equal Channel Angular Pressing of Duplex Stainless Steel

Abstract:

Duplex Stainless Steel (DSS) is well known for their higher mechanical strength and better corrosion resistance. DSS is commonly used for marine construction, petrochemical and chemical industries. DSS (2205) is having equal amount of α and γ phases.The present study was conducted on12mm diameter rod of the UNS S32205 duplex stainless steel subjected to equal channel angular pressing (ECAP). The refinement of original grains was observed. Effect of microstructure change on the corrosion behavior of equal channel angular pressed (ECAP) UNS S32205 duplex stainless steel was investigated. After single pass ECAP process and study about the pitting corrosion resistance. The mechanical properties of UNS S3 2205 duplex stainless steelwere evaluated. The amount of ferrite after ECAP and before ECAP for the two different conditions was investigated. Also observed percentage of ferrite content reduces 3.32% after ECAP.

You might also be interested in these eBooks

Key Engineering Materials and Computer Science II

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 717)

Pages:

9-14

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.717.9

Citation:

Cite this paper

Online since:

July 2013

Authors:

P.M. Ajith, P. Sathiya, Kondaiah Gudimetla, B. Ravishankar

Keywords:

Duplex Stainless Steel, ECAP, Mechanical Property, Microstructure

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] E.I. Kivineva and N.E. Hannerz: Proceedings of the Fourth InternationalConference on Duplex Stainless Steels, Glasgow, Scotland, Paper 7, Vol. 2 (1994), pp.13-16.

Google Scholar

[2] R.Z.valiev and T.G. langdon: Principles of equal-channel angular pressing as a processing tool for grain refinement Progress in Materials Science Vol. 51 (2006) pp.881-981.

DOI: 10.1016/j.pmatsci.2006.02.003

Google Scholar

[3] Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto and T.G. Langdon: Principle of equal-channel angular pressing for the processing of ultra-fine grained materials ScriptaMaterialia Vol. 35 (1996), pp.143-146.

DOI: 10.1016/1359-6462(96)00107-8

Google Scholar

[4] T.G. Langdon: The principles of grain refinement in equal-channel angular pressing", Materials Science and Engineering , Vol. 462 (2007), pp.3-11.

DOI: 10.1016/j.msea.2006.02.473

Google Scholar

[5] S.V. Dobatkin, J.Zrnik, and I. Mamuzic: Nanostructures by severe plastic deformation of steels: advantages and problems, Vol. 45(2006), pp.313-321.

Google Scholar

[6] S.L Semiatin, D.P Delo: Equal channel angular extrusion of difficult-to-work alloys Vol. 21(2000), pp.311-322.

DOI: 10.1016/s0261-3069(99)00085-0

Google Scholar

[7] W.Skrotzki, N.Scheerbaum, C.Oertel, H.Brokmeier, S.Suwas, and L.S. Toth: Recrystallization of high-purity aluminum during equal channel angular pressing ActaMaterialia, Vol.55(2007), pp.2211-2218.

DOI: 10.1016/j.actamat.2006.08.018

Google Scholar

[8] C.Xu, K. Xia,and T.G. Langdon: The role of back pressure in the processing of pure aluminum by equal-channel angular pressing ActaMaterialia Vol. 55(2007), pp.2351-2360.

DOI: 10.1016/j.actamat.2006.11.036

Google Scholar

[9] H.RZ.Sandim: Equal channel angular extrusion of niobium single crystals Materials Science and Engineering, Vol. 467(2007), p.44–52.

DOI: 10.1016/j.msea.2007.02.086

Google Scholar

[10] A.F. Padilha and L.C Guedes: Açosinoxidaveis Austeniticos, Curitiba, HemusLivraria, distribuidora Editora, p.190.

Google Scholar

[11] J.O. Nilsson: Super duplex stainless steels Materials Science and Technology Vol. 8 (1992), pp.685-700.

DOI: 10.1179/mst.1992.8.8.685

Google Scholar

[12] M.Pohl and A.F. Padilha: Açosinoxidaveisferriticos-austeniticos com microestruturaduplex Nickel, Vol. 3(1988), pp.7-8.

Google Scholar