[1]
E. Doege, B.-A. Behrens, Handbuch Umformtechnik, Springer, 2007.
Google Scholar
[2]
M. Schneider, U. Eggers, Investigation on punched edge formability, in: Proc. of the IDDRG Conference, 2011.
Google Scholar
[3]
A. Karelova, C. Krempaszky, E. Werner, P. Tsipouridis, T. Hebesberger, Hole expansion of dual-phase and complex-phase AHSS – effect of edge conditions, Steel Res. Int. 80 (2009) 71-77.
Google Scholar
[4]
A.G. Atkins, Fracture mechanics and metalforming: Damage mechanics and the local approach to fracture of yesterday and today, in: H.P. Rossmanith (Ed.), Fracture Research in Retrospect, Balkema, Rotterdam, 1997, pp.327-350.
Google Scholar
[5]
J. Lemaitre, R. Desmorat, Engineering Damage Mechanics, Springer, 2005.
Google Scholar
[6]
G.R. Johnson, W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures, and pressures, Eng. Fract. Mech. 21 (1985) 31-48.
DOI: 10.1016/0013-7944(85)90052-9
Google Scholar
[7]
Y. Bao, T. Wierzbicki, On the cut-off value of negative triaxiality for fracture, Eng. Frac. Mech. 72 (2005) 1049-1069.
DOI: 10.1016/j.engfracmech.2004.07.011
Google Scholar
[8]
C. Poizat, L. Campagne, L. Daridon, S. Ahzi, C. Husson, L. Merle: Modelling and simulation of blanking using damage and rupture criteria, Int. J. Form. Proc. 8 (2005) 29-47.
DOI: 10.3166/ijfp.8.29-47
Google Scholar
[9]
E.G. Ng, D.K. Aspinwall, Modelling of hard part machining, J. Mat. Proc. Tech. 27 (2002) 222-229.
Google Scholar
[10]
H. Huh, W.J. Kang, Crashworthiness assessment of thin-walled structures with the high-strength steel sheet, Int. J. of Vehicle Design 30 (2002) 1-21.
DOI: 10.1504/ijvd.2002.002022
Google Scholar
[11]
M. Oyane, T. Sato, K. Okimoto, S. Shima, Criteria of ductile fracture strain, Bulletin of JSME 15 (1972) 1507-1513.
DOI: 10.1299/jsme1958.15.1507
Google Scholar
[12]
A. Gurson, Continuum theory of ductile rupture by void nucleation and growth: Part I – Yield criteria and flow rules for porous ductile media, J. Eng. Mat. Techn. 99 (1977) 2-15.
DOI: 10.2172/7351470
Google Scholar
[13]
V. Tvergaard, A. Needleman, Analysis of cup cone fracture in a round tensile bar, Acta metal. 32 (1984) 157-169.
DOI: 10.1016/0001-6160(84)90213-x
Google Scholar
[14]
M. Gologanu, J. Leblond, J. Devaux, Approximate models for ductile metals containing non-spherical voids – case of axisymmetric prolate ellipsoidal cavities, J. Mech. Phys. Solids 41 (1993) 1723-1754.
DOI: 10.1016/0022-5096(93)90029-f
Google Scholar
[15]
F. Neukamm, M. Feucht, A. Haufe, K. Roll, A generalised incremental stress state dependent model for forming and crashwothiness simulations, in: Proc. of the Numisheet Conference, 2008.
Google Scholar
[16]
V. Tvergaard, A. Needleman, A modified Gurson model, in: J. Lemaitre (Ed.), Handbook of materials behaviour models, Academic Press, San Diego, 2001, pp.430-435.
DOI: 10.1016/b978-012443341-0/50048-x
Google Scholar
[17]
K. Nahshon, J.W. Hutchinson, Modifications of the Gurson model for shear failure, European J. of Mech. A / Solids 76 (2008) 1-17.
Google Scholar
[18]
K. Nahshon, Z. Xue, A modified Gurson model and its application to punch-out experiments, Eng. Frac. Mech. 76 (2009) 997-1009.
DOI: 10.1016/j.engfracmech.2009.01.003
Google Scholar
[19]
B.-A. Behrens, A. Bouguecha, M. Vucetic, I. Peshekhodov, Characterisation of the quasi-static flow and fracture behaviour of dual-phase steel sheets in a wide range of plane stress states, Arch. Civil and Mech. Eng. 12 (2012) 397-406.
DOI: 10.1016/j.acme.2012.06.017
Google Scholar