Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Effect of Cold Rolling on Sensitization of 304 Stainless Steel Weldments
p.60
Synthesis, Characterization and Evaluation of Property Profile of Hybrid Ion- Exchanger
p.64
Preparation and Characterization of Activated Carbons Based on Lignocellulosic Residues
p.69
Experimental and Numerical Study of Plain-Woven Aramid Fabric
p.74
Preparation of Three Dimensional Products Using Flow Deformability of Wood Treated by Small Molecular Resins
p.79
Epoxidized Vegetable Oil as a Sustainable Ingredient in Welding Electrode Coatings
p.87
Contact Width Analysis of Corrugated Metal Gasket Based on Surface Roughness
p.92
Experimental Investigation on Nanofluids Effectiveness on Heat Transfer in Oscillating Heat Pipe
p.98
Deposition and Characterization of Electroless Ni-P/Ni-W-P Duplex Coating Using Electrochemical Impedance Spectroscopy
p.103

Preparation of Three Dimensional Products Using Flow Deformability of Wood Treated by Small Molecular Resins

Article Preview

Abstract:

To investigate the effect of the additive agents such as polyethylene glycols (PEGs), melamine formaldehyde resin (MF-resin) and phenol formaldehyde resin (PF-resin) on the flow deformability of solid wood, free compression tests during heating were performed. Various molecular weights ranging from 200 to 20,000 for PEGs and almost similar molecular weight around 380 for MF-resin and PF-resin were applied. It was found from the compression tests that the yield stress indicating wood cell deformation resistance was drastically decreased with smaller molecular PEGs in wood, whereas the initiation of flow behavior, which is derived from detachment/slippage between cells, occurred at lower pressure with larger molecular PEGs. For generating the flow behaviors of solid wood, smaller molecular resin/substance was not always suitable. Thermosetting agents also act as a plasticizer during heating and especially the PF-resin showed better softening effect as well as a promoter of flow behavior than the MF-resin with almost similar molecular weight. This indicates that it is important for generating flow behavior to consider affinity/compatibility of resin to wood constituents. A maximum flow deformation ratio in the tangential direction of wood reached 180 % when using PEG 20,000 and MF-resin as an additive agent. It was also demonstrated that using PF-resin and MF-resin deep cup products shaped by a backward extrusion process had a better size stability against water, steam, and acetone.

You might also be interested in these eBooks
Material Science and Engineering Technology II View Preview

Info:

Periodical:

Advanced Materials Research (Volume 856)

Pages:

79-86

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.856.79

Citation:

Cite this paper

Online since:

December 2013

Authors:

Tsunehisa Miki, Masako Seki, Ichinori Shigematsu, Kozo Kanayama

Keywords:

Deformability, Flow, Plastic Forming, Three Dimensional Shaping (3D), Wood

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Tsunehisa Miki, Osamu Yamashita, Hiroyuki Sugimoto, Kozo Kanayama: Proceedings of the 8th International Conference of Eco-Materials, 1 (2007), p.177.

Google Scholar

[2] Tsunehisa Miki, Hiroyuki Sugimoto, Kozo Kanayama: MRS Fall Meeting Proceedings, 1304 (2011), DOI: http: /dx. doi. org/10. 1557/opl. 2011. 609 (Online publication).

Google Scholar

[3] Osamu Yamashita, Hideyuki Yokochi, Hiroshi Imahishi, Tsunehisa Miki, Kozo Kanayama: Trans. of the Japan Society of Mechanical Engineering A, 72 (2007), p. (2074).

Google Scholar

[4] Osamu Yamashita, Hideyuki Yokochi, Tsunehisa Miki, Kozo Kanayama: Trans. of the Japan Society of Mechanical Engineering A, 73 (2007), p.583.

Google Scholar

[5] Osamu Yamashita, Hideyuki Yokochi, Tsunehisa Miki, Kozo Kanayama: J. Mater. Proc. Tech., 209 (2009), p.5239.

Google Scholar

[6] Tsunehisa Miki, Masako Seki, Hiroyuki Sugimoto, Ichinori Shigematsu, Kozo Kanayama: Proc. of 11th pacific rim Bio-based Composite Symposium Bio-comp 2012, p.154.

Google Scholar

[7] Yutaka Ishimaru: Mokuzai Gakkaishi. 45 (1999). p.434.

Google Scholar

[8] Yutaka Ishimaru: Mokuzai Gakkaishi. 45 (1999). P. 441.

Google Scholar

[9] H. Harada and W.A. Côté, in: Biosynthesis and Biodegradation of Wood Components, edited by Higuchi, T., Academic Press, Orlando (1985).

Google Scholar

[10] Hiromu Kajita: Wood Science and Technology. 26 (1992). P. 63.

Google Scholar

[11] T. Furuno, Y. Imamura, H. Kajita: Wood Science and Technology, 37 (2004), p.349.

Google Scholar

[12] Y. Imamura, M, Takahashi, JY Ryu, H. Kajita: Biocontrol Sci. 3 (1998), p.109.

Google Scholar

[13] H. Kajita, Y. Imamura: Wood Science and Technology., 26 (1991), p.63.

Google Scholar

[14] L. A Smith, W.A. Côté: Wood and Fiber, 3 (1971), p.56.

Google Scholar

[15] A. J Stamm, RM Seborg: Ind. Eng. Chem. 31 (1936), p.897.

Google Scholar

[16] Md Iftekhar Shams, Hiroyuki Yano and Keijirou Endou: Journal of Wood Science, 50 (2004), p.337.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved