An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys

Zhao Hui Pi; Guang Qiang Li; Yan Ping Xiao; Zhan Zhang; Zhuo Zhao; Yong Xiang Yang

doi:10.4028/www.scientific.net/AMR.887-888.324

Paper Titles

Structure and Performance of Calcined Bauxite
p.305

Microstructure and Compression Deformation Behavior in the Quasicrystal-Reinforced Mg-6Zn-2Y Alloy Solidified under Super-High Pressure at Room-Temperature
p.311

Research on Compressive Behavior and Deformation Heating of 7075-T6 Aluminum Alloy during Hot Compression
p.315

Aircraft Bearings Fracture Failure Analysis
p.319

An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys
p.324

Grain Structure and Precipitates in Squeeze Casting Al-Li-Mg-Zr Alloy
p.329

Dynamics of Phase Transformation in Cu-Cr-Zr Alloy
p.333

Effects of Structures of Zinc/Substrate Interface on Coating Adhesion of Hot-Dip Galvanized DP Steels
p.338

Cube Texture Formation of Cu-33at.%Ni Alloy Substrates and CeO₂ Buffer Layer for YBCO Coated Conductors
p.345

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 887-888An Experimental Investigation on the Solubility of...

An Experimental Investigation on the Solubility of Zr in Cu-Sn Alloys

Abstract:

An experimental investigation on the solubility of Zr in Cu-Sn alloy was conducted in a resistance furnace. The solubility of Zr in Cu-Sn alloy was determined by investigating the influence of different conditions such as the ratio of Cu-Sn alloy and temperature. The solubility of Zr in Cu-Sn alloy changes with the proportion of Cu and Sn, and it increases with the increasing of Cu content. The experimental temperature has a significant effect on the solubility of Zr in Cu-Sn alloy. The maximum solubility of Zr in Cu-Sn alloy is 6.2 mass % at 900 °C with the mass ratio of Cu : Sn = 8:2.

You might also be interested in these eBooks

Advances in Materials and Materials Processing IV

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 887-888)

Pages:

324-328

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.887-888.324

Citation:

Cite this paper

Online since:

February 2014

Authors:

Zhao Hui Pi*, Guang Qiang Li, Yan Ping Xiao, Zhan Zhang, Zhuo Zhao, Yong Xiang Yang

Keywords:

Cu-Sn-Zr System, Separation, Solubility, Zr

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Xinwen Luo, Fangcheng Luo: Jiangxi Metallurgy, Vol. 29 No. 4 2009: 39-42. (In Chinese).

Google Scholar

[2] Jianzhang Liu: Beijing: Chemical Industry Press, 2007: 109. (In Chinese).

Google Scholar

[3] Xijing Xie, Song Liu, Jingxin Wang: RE metal. Vol. 33 No. 3 2009: 426-428. (In Chinese).

Google Scholar

[4] Bingkun Xiong: Beijing: Metallurgical Industry Press, 2002: 23. (In Chinese).

Google Scholar

[5] Mahapatra SinhaN，Purkayastha U , Sarkar S: Separation Science and Technology，Vol. 10 No. 6 1975: 755-756.

Google Scholar

[6] PorielL Pellet-RostaingS，Lamotte V: Separation Science and Technology，Vol. 41 No. 13 2006: 2883-2884.

Google Scholar

[7] PorielL Pellet-RostaingS，Lamotte V: Separation Science and Technology，Vol. 41 No. 12 2006: 2711-2712.

Google Scholar

[8] Process for separating hafnium and Zirconium, WO 2010/131970, POT/NL2010/050289.

Google Scholar

[9] L. P. Romaka, N.O. Koblyuk, Yu. V: Stadnyk. Polish Journal of Chemistry. Vol. 72, 1988: 1154-1159.

Google Scholar

[10] N. Saunders and A. P. Miodownlk: Bulletin of Alloy Phase Diagrams Vol. 11 No. 3 1990: 278-279.

Google Scholar

[11] H. Okamoto: Journal of Phase Equilibria and Diffusion Vol. 29 No. 2 2008: 204-205.

Google Scholar