Paper Titles

Effect of Plastic Deformation on a Dispersion of Omega-Phase and Mechanical Properties of an Al-Cu-Mg-Ag Alloy
p.189

Effect of Carbon Gradient on the Microstructure and Mechanical Properties of Fe-22Mn-C TWIP/TRIP Steels
p.195

Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel
p.201

Thermomechanical Ageing of Copper-Clad Aluminum Wires Submitted to Creep Test Conditions
p.207

Application of Texture Analysis for Optimizing Thermo-Mechanical Treatment of a High Mn TWIP Steel
p.213

Cu/Cu Direct Bonding by Metal Salt Generation Bonding Technique with Formic Acid and Citric Acid
p.219

Influence of the Partitioning Treatment on the Mechanical Properties of a 0.3C-1.5Si-3.5Mn Q&P Steel
p.224

Possible Orbital-Ordered State in the Highly-Correlated Electronic Material Sr_1-_xCe_xMnO₃
p.230

Preparatory Electrodeposition Process for High Purity Bulk Aluminum
p.237

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 922Application of Texture Analysis for Optimizing...

Application of Texture Analysis for Optimizing Thermo-Mechanical Treatment of a High Mn TWIP Steel

Article Preview

Abstract:

A recently introduced processing route consisting of cold rolling and recovery annealing allows the production of TWIP steels with high yield strength along with appreciable uniform elongation due to the thermal stability of mechanically induced nanoscale twins. A wide range of strength-ductility combinations was obtained using recovery and recrystallization annealing of 30%, 40%, and 50% cold-rolled Fe-23Mn-1.5Al-0.3C TWIP steel. Texture measurement during cold rolling and annealing was proven to be a suitable tool to determine the optimal deformation degree and annealing time for this processing method. As a consequence, texture analysis can be used to predict the final materials properties.

You might also be interested in these eBooks

THERMEC 2013 Supplement

Info:

Periodical:

Advanced Materials Research (Volume 922)

Pages:

213-218

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.922.213

Citation:

Cite this paper

Online since:

May 2014

Authors:

Christian Haase*, Luis Antonio Barrales-Mora, Dmitri A. Molodov, Günter Gottstein

Keywords:

Mechanical Property, Microstructure, Recovery, Texture, TWIP Steel

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] O. Grässel, G. Frommeyer, C. Derder, H. Hofmann, J. Phys. IV 7 (1997) 383-388.

[2] B. C. De Cooman, O. Kwon, K. G. Chin, Mater. Sci. Technol. 28 (2012) 513-527.

[3] O. Bouaziz, S. Allain, C. P. Scott, P. Cugy, D. Barbier, Curr. Opin. Solid State Mater. Sci. 15 (2011) 141-168.

[4] O. Grässel, L. Krüger, G. Frommeyer, L.W. Meyer, Int. J. Plast. 16 (2000) 1391-1409.

[5] X. Zhang, A. Misra, Scripta Mater. 66 (2012) 860-865.

[6] O. Bouaziz, C. P. Scott, G. Petitgand, Scripta Mater. 60 (2009) 714-716.

[7] T. Roland, D. Retraint, K. Lu, J. Lu, Mater. Sci. Eng. A 445-446 (2007) 281-288.

[8] G. Dini, A. Najafizadeh, R. Ueji, S. M. Monir-Vaghefi, Mater. Lett. 64 (2010) 15-18.

[9] C. Haase, L. A. Barrales-Mora, D. A. Molodov, G. Gottstein, accepted for publication in Metall. Mater. Trans. A (2013).

DOI: 10.1007/s11661-013-1935-0

[10] C. Haase, S. G. Chowdhury, L. A. Barrales-Mora, D. A. Molodov, G. Gottstein, Metall. Mater. Trans. A 44 (2013) 911-922.

DOI: 10.1007/s11661-012-1543-4

[11] A. Saeed-Akbari, L. Mosecker, A. Schwedt, W. Bleck, Metall. Mater. Trans. A 43 (2011) 1688-1704.

DOI: 10.1007/s11661-011-0993-4

[12] Y. Lü, D. A. Molodov, G. Gottstein, ISIJ Int. 51 (2011) 812-817.

[13] Y. Lü, B. Hutchinson, D. A. Molodov, G. Gottstein, Acta Mater. 58 (2010) 3079-3090.

[14] L. Bracke, K. Verbeken, L. Kestens, J. Penning, Acta Mater. 57 (2009) 1512-1524.

[15] G. Wassermann, Zeitschrift fuer Metallkunde 54 (1963) 61-65.

[16] L. A. Barrales-Mora, Y. Lü, D. A. Molodov, G. Gottstein, Mater. Sci. Forum 715-716 (2012) 849-852.

DOI: 10.4028/www.scientific.net/msf.715-716.849

[17] L. A. Barrales-Mora, Y. Lü, D. A. Molodov, Steel Res. Int. 82 (2011) 119-126.

[18] Y. Lü, D. A. Molodov, G. Gottstein, Acta Mater. 59 (2011) 3229-3243.

[19] Y. Lü, D. A. Molodov, G. Gottstein, Mater. Sci. Forum 715-716 (2012) 568-573.

[20] Y. Lü, D. A. Molodov, G. Gottstein, Mater. Sci. Forum 702-703 (2012) 443-448.

[21] F. Lu, C. Haase, L. A. Barrales-Mora, D. A. Molodov, P. Yang, Mater. Sci. Forum 753 (2013) 177-180.

[22] C. Haase, L.A. Barrales-Mora, D. A. Molodov, G. Gottstein, Mater. Sci. Forum 753 (2013) 213-216.

DOI: 10.4028/www.scientific.net/msf.753.213