Sol-Gel Ink-Jet Printing Technique for Synthesis of Buffer Layers of Coated Conductors

V. Cloet; M.C. Cordero-Cabrera; T. Mouganie; Bartek A. Glowacki; M. Falter; B. Holzapfel; J. Engell; M. Bäcker; Isabel Van Driessche

doi:10.4028/www.scientific.net/AST.47.153

Paper Titles

Progress of YBCO Coated Conductor in JAPN and Recent Advance of PLD and IBAD Method
p.124

MgB₂ Composite Superconductors Made by Ex Situ and In Situ Process
p.131

Fabrication and Evaluation of Ag-Bi2223 Composite Tapes with Interfilamentary Resistive Barriers
p.137

Preparation and Properties of Advanced MgB₂ Wires and Tapes
p.143

Sol-Gel Ink-Jet Printing Technique for Synthesis of Buffer Layers of Coated Conductors
p.153

Fabrication of Bi₂Sr₂Ca_n-1Cu_nO_y / Al₂O₃-Particles on MgO Films by rf Magnetron Sputtering Method
p.159

Preparation of Partial-Melted Sm-Ba-Cu-O Bulk Superconductor
p.165

Logic Operation of SFQ Circuit Elements Made of YBCO Junctions
p.170

Recent Progress in Rapid-Single-Flux-Quantum Circuits
p.180

HomeAdvances in Science and TechnologyAdvances in Science and Technology Vol. 47Sol-Gel Ink-Jet Printing Technique for Synthesis...

Sol-Gel Ink-Jet Printing Technique for Synthesis of Buffer Layers of Coated Conductors

Abstract:

In this present work, two buffer layers (La2Zr2O7 and CeO2) were deposited by a non-contact computer-controlled ink-jet coating technique with sol-gel precursors on highly textured Ni-5%W Rolling Assisted Biaxially Textured substrates (RABiTS). Lanthanum acetate and cerium acetylacetonate were used as precursors for the LZO and CeO2 sol respectively. After a high temperature heat treatment (heating at 900°C for LZO and at 1100°C for CeO2) under reducing atmosphere, epitaxial textured buffer layers were obtained. XRD and pole figures were used to analyse the texture of the films, the microstructure was analysed by SEM.

You might also be interested in these eBooks

Science and Engineering of Novel Superconductors V

View Preview

Info:

Periodical:

Advances in Science and Technology (Volume 47)

Pages:

153-158

DOI:

https://doi.org/10.4028/www.scientific.net/AST.47.153

Citation:

Cite this paper

Online since:

October 2006

Authors:

V. Cloet, M.C. Cordero-Cabrera, T. Mouganie, Bartek A. Glowacki, M. Falter, B. Holzapfel, J. Engell, M. Bäcker, Isabel Van Driessche

Keywords:

Buffer Layer, Coated Conductor, Ink Jet Printing Technique, Sol-Gel (SG)

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] M.K. Wu, et al., Phys. Rev., Vol. 58, (1987), p.908.

Google Scholar

[2] Lee D.F. et al., Supercond. Sci. Technol. 17, (2004), pp.386-394.

Google Scholar

[3] Kakimoto K. et al., Physica C: Superconductivity (2005), pp.426-431.

Google Scholar

[4] Zhu X.B. et al., Physica C: Superconductivity 418, Issues 1-2, (2005), pp.59-62.

Google Scholar

[5] Falter M., Hässler W., Schlobach B., Holzapfel B., Physica C., Vol. 372-276, (2002), pp.1326-30.

Google Scholar

[6] Mouganie T., Cordero-Cabrera M.C., Glowack B., Bäcker M., Falter M. and Holzapfel B., in progress, submitted to IEEE Transactions on Applied Superconductivity.

Google Scholar

[7] Eickemeyer J., Selbmann D., Opitz R., de Boer B., Holzapfel B., Schulz L., Supercond. Sci. Technol. 14 (2001), p.152.

Google Scholar

[8] Engel S, Knoth K., Hühne R., Schultz L., Holzapfel B., Supercond. Sci. Technol. 18, (2005), 1385-1390.

Google Scholar

[9] Ricken M., Nölting J., J. Solid State Chem. 54, (1984), 89-99.

Google Scholar

[10] Campserveux, Gerdanian P., J. Solid State Chem. 23, (1978), 73.

Google Scholar