Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process

Takahiro Niki; Kazuhiro Ogawa; Tetsuo Shoji

doi:10.4028/www.scientific.net/KEM.353-358.537

Paper Titles

Welding Characteristic Evaluation of GMAW and Laser Cladding for the Gas Turbine 1st Blade
p.519

A Study on the Degradation of the Superalloy Inconel 718 Using Ultrasonic Technique
p.523

Characteristics of High Temperature Tensile Properties and Residual Stresses in Welded Joints of the SM570-TMCP Steel
p.527

Creep Model Based on Theta Projection and Omega Method for Predicting the Creep Behavior of Alloy
p.533

Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process
p.537

Artificial Neural Network Models for Predicting Flow Stress and Microstructure Evolution of a Hydrogenized Titanium Alloy
p.541

Fatigue Crack Growth Rate in Low ΔK Range According to the Microstructure and Temperature in P122 Alloy Weldment
p.545

Quantitative Characterization of Microstructure of Thermal Deformed TA15 Titanium Alloy by EBSD
p.549

Uniaxial Cyclic Deformation Behaviors of 42CrMo Steel with Different Heat-Treatments
p.555

HomeKey Engineering MaterialsKey Engineering Materials Vols. 353-358Segregation of Alloying Elements of Directionally...

Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process

Abstract:

The mechanism of the degradation process of nickel based superalloy CM247LC under creep loading was analyzed by considering the microscopic chemical composition of the material such as phase boundary of γ and γ’ phases. In this study, a Directionally Solidified (DS) nickel-based superalloys CM247LC was used as test specimens. The creep test was performed at 900oC under an uni-axial stress of 216 MPa. Each specimen was creep ruptured and interrupted at different hours and then analyzed. The change of chemical composition around the interface analyzed precisely by used Auger Electron Spectroscopy (AES). It was found that the local enrichment or lack of cobalt and chromium was found at the interface. This tendency was not found in the stress free area. Since chromium is the well-known element that dominates the degradation of this material, such an enrichment or lack of cobalt and chromium may play an important role for forming a crack propagation path near the interface. This local segregation should be analyzed further to make clear degradation mechanism of this material.

You might also be interested in these eBooks

Progresses in Fracture and Strength of Materials and Structures

View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 353-358)

Pages:

537-540

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.353-358.537

Citation:

Cite this paper

Online since:

September 2007

Authors:

Takahiro Niki, Kazuhiro Ogawa, Tetsuo Shoji

Keywords:

Auger Electron Spectroscopy (AES), Creep Degradation, Element Diffusion, Microstructure, Nickel-Based Superalloy

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] T. M. Maccagno, A. K. Koul, J. P. Immarigeon, L. Culter, R. Allem and G. L'esperance: Metallurgical Transactions A, Vol. 21A, (1990), pp.3115-3125.

Google Scholar

[2] X. Guo, H. Fu and J. Sun: Metallurgical Transactions A, Vol. 28A, (1997), pp.997-1009.

Google Scholar

[3] W. Ross: Journal of Metals, (1967), pp.12-14.

Google Scholar

[4] Y. Yoshida, D. Saito, K. Fujiyama and N. Okabe: Advanced Materials and Coatings for Combustion Turbines, Proceedings of ASM 1993 Materials Congress Materials Week '93, (1993), pp.53-58.

Google Scholar