Surface Integrity Research on Barrel Finishing of Crankshafts’ Part

Wen Hui Li; H.L. Chen; Sheng Qiang Yang

doi:10.4028/www.scientific.net/KEM.392-394.655

Paper Titles

Study on the Web-Service Platform Architecture for Bio-Manufacturing
p.634

A Reliability Analysis Method Based on Execution Scenario for Modular NC Software
p.640

The Monitoring and Analysis on the State of Deep Hole Drilling Based on Multi-Sensor Combined Detection Technology
p.645

Research and Applications of Fuzzy-PID Control on NC Machine
p.650

Surface Integrity Research on Barrel Finishing of Crankshafts’ Part
p.655

Product Rapid Design for Customer Individual Requirements
p.661

An Open Architecture Control System for Parallel Kinematic Machines Based on Multi-DSP Parallel Procession
p.667

The Fault Tree Analysis of Striking Cylinder of Air Compressor Based on Grey Relation Theory
p.672

Ant Colony Optimization for Neural Network
p.677

HomeKey Engineering MaterialsKey Engineering Materials Vols. 392-394Surface Integrity Research on Barrel Finishing of...

Surface Integrity Research on Barrel Finishing of Crankshafts’ Part

Abstract:

At present, crankshafts are finished mostly by abrasive cloth and manual steel brush, which is not ideal on finishing quality, efficiency and cost, especially cleanness degree does not meet design and use request. So a new horizontal spindle barrel finishing for crankshafts has been developed. To contrast the finishing effect, surface geometric characteristic, physical-mechanical property, cleanness degree etc. are analyzed, which indicates this process can comprehensively improve the surface integrity of crankshafts’ part. Simultaneously, this process can decrease cost, reduce labour intensity, improve efficiency, and easy to automation. Its application has wide economic and social benefits.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 392-394)

Pages:

655-660

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.392-394.655

Citation:

Cite this paper

Online since:

October 2008

Authors:

Wen Hui Li, H.L. Chen, Sheng Qiang Yang

Keywords:

Barrel Finishing , Deburring, Finishing, Surface Integrity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S.C. Yang: Surface Quality and Finishing Technology (Machinery Industry Press, China 2001).

Google Scholar

[2] W.H. Li, S.Q. Yang and S.C. Yang: Key Engineering Materials, Vol. 359-360 (2008), p.394.

Google Scholar

[3] S.Q. Yang, W.H. Li and S.C. Yang: Proc. The International Conference on Surface Finishing Technology and Surface Engineering (DaLian, China, September 25-27, 2006), p.45.

Google Scholar

[4] S.Q. Yang, M.Z. Wang, S.C. Yang and M.Z. Wang: China Mechanical Engineering, Vol. 12 (2001), No. 1, p.300.

Google Scholar

[5] S.Q. Yang, Y.W. Wang and S.C. Yang: China Mechanical Engineering, Vol. 10 (1999), No. 6, p.626.

Google Scholar

[6] W.H. Li, S.C. Yang and S.Q. Yang: Journal of TaiYuan University of Technology, Vol. 33 (2002), No. 2, p.166.

Google Scholar