The Use of Magnetostrictive Cores for the Vibrations Generation and Energy Harvesting from Vibration, in the Selected Frequencies of Work

Jerzy Kaleta; Krzysztof Kot; Rafał Mech; Przemyslaw Wiewiorski

doi:10.4028/www.scientific.net/KEM.598.75

Paper Titles

Model of Fatigue Damage Accumulation
p.51

Damage Size Estimation of the Aircraft Structure with Use of Embedded Sensor Network Generating Elastic Waves
p.57

The Simulation of Void Growth along Curvilinear Crack Front
p.63

High Power Actuator Based on Magnetostrictive Composite Core with Temperature Drift Compensation
p.69

The Use of Magnetostrictive Cores for the Vibrations Generation and Energy Harvesting from Vibration, in the Selected Frequencies of Work
p.75

Investigations of Magnetorheological Elastomers Subjected to Cyclic Loading
p.81

Magnetovision Method for Determining the Martensite Phase in the Austenite in Cylindrical and Spherical Objects as a Result of the Cyclic Loads
p.86

Hertzian Crack Propagation in Ceramic Rolling Elements
p.92

Specifics Deformation Aluminium Alloy D16 in Conditions Additional Load Impulse
p.99

HomeKey Engineering MaterialsKey Engineering Materials Vol. 598The Use of Magnetostrictive Cores for the...

The Use of Magnetostrictive Cores for the Vibrations Generation and Energy Harvesting from Vibration, in the Selected Frequencies of Work

Abstract:

The paper presents research on use of magnetostrictive cores for the recovery of energy from vibrations and its use to power low-power electronics. To achieve this goal a test stand was constructed to generate and to receive the vibrations in the measurement system at the same time. Selection of an appropriate magnetomechanical parameters of the system was an important element influencing end results. The most important were values of the prestress and magnetising field for actuators and harvesters. As a result of the investigation the device operating in a wide frequency range (up to 40 KHz) and a system for energy transportation through mechanical vibrations were developed. Moreover it was shown that the proposed solution allow information transfer in a short bursts over the same system as energy transfer.

You might also be interested in these eBooks

14th Fracture and Fatigue of Materials and Structures

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 598)

Pages:

75-80

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.598.75

Citation:

Cite this paper

Online since:

January 2014

Authors:

Jerzy Kaleta, Krzysztof Kot*, Rafał Mech, Przemyslaw Wiewiorski

Keywords:

Energy Harvesting, Energy Transfer, Giant Magnetostriction, Terfenol-D, Ultrasonic

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] S. Priya, D.J. Inman, Energy Harvesting Technologies, Springer, New York, 2009.

Google Scholar

[2] N. Nersessian, S.W. Or, G.P. Carman, Magneto-thermo-mechanical characterization of 1-3 type polymer-bonded Terfenol-D composites, J. of Magnet. and Mag. Mat. 263 (2003) 101-112.

DOI: 10.1016/s0304-8853(02)01542-1

Google Scholar

[3] M.J. Dapino, A.B. Flatau, F.T. Calkins, Statistical analysis of Terfenol-D material properties, in: M.E. Regelbrugge (Eds.), Proc. SPIE Vol. 3041 Smart Structures and Materials 1997: Smart Structures and Integrated Systems, San Diego, 1997, pp.256-267.

DOI: 10.1117/12.275651

Google Scholar

[4] J. Kaleta, D. Lewandowski, P. Wiewiorski, R. Mech, M. Liberda, Power generating by high pulse mechanical stimulation of magnetic coupled NdFeB and Terfenol-D, in: Z. Ounaies, J. Li, (Eds), Proc SPIE Vol. 7644 Behavior and Mechanics of Multifunctional Materials and Composites, San Diego, 2010, 7644U.

DOI: 10.1117/12.847974

Google Scholar

[5] J.M. Bomba, J. Kaleta, Energy transformation in giant magnetostrictive materials induced by cyclic loading (in polish), Proc. XXI Sympozjum Zmeczenie i Mechanika Pekania, Bydgoszcz (2006).

Google Scholar