Development of Twin Fractions and Microstresses of the Hot Extruded Magnesium Alloy AZ31 under Cyclic Loading Conditions

Article Preview

Abstract:

For investigating the twinning and detwinning behaviour under cyclic loading conditions in-situ stress measurements with different applied strain amplitudes were performed at the beamline 7T-MPW at BESSY II. Intensity measurements of the (10-10), (11-20) and (0002) reflections served for the determination of the twinned volume fraction. The measurements of the (hkil) dependent strains and stresses gave information on the load partitioning between different grain orientations. The intensity measurements performed in the compression regime showed that the evolution of the (0002) reflection intensity depends on the strain amplitude. For strain amplitudes ≥ 0.75 % an increase in intensity is observed whereas for smaller strain amplitudes the (0002) intensity decreases with increasing cycle numbers. In the tensile regime an increase in the (0002) reflection intensity is found for the whole range of applied strain amplitudes.

You might also be interested in these eBooks

Info:

Periodical:

Materials Science Forum (Volumes 638-642)

Pages:

2411-2416

Citation:

Online since:

January 2010

Export:

Price:

[1] S.B. Yi, C.H.J. Davies, H. -G. Brokmeier, R.E. Bolmaro, K.U. Kainer, J. Homeyer: Acta Mater. 54 (2006) 549.

DOI: 10.1016/j.actamat.2005.09.024

Google Scholar

[2] S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, S.C. Vogel: Scripta Mater. 48 (2003) 1003.

Google Scholar

[3] D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, S.C. Vogel, C.N. Tomé: Mater. Sci. Eng. A 399 (2005) 1.

Google Scholar

[4] X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, R.H. Wagoner:, Int. J. Plast. 23 (2007) 44.

Google Scholar

[5] M.R. Barnett: Mater. Sci. Eng. A 464 (2007) 1.

Google Scholar

[6] M.H. Yoo: Metall. Trans. A 12 (1981) 409.

Google Scholar

[7] D.W. Brown, A. Jain, S.R. Agnew, B. Clausen: Mater. Sci. Forum 539-543 (2007) 3407.

Google Scholar

[8] L. Wu, G.M. Stoica, H. -H. Liao, S.R. Agnew, E.A. Payzant, G. Wang, D.E. Fielden, L. Chen, P.K. Liaw: Metall. Mater. Trans. A 38 (2007) 2283.

DOI: 10.1007/s11661-007-9123-8

Google Scholar

[9] L. Wu, A. Jain, D.W. Brown, G.M. Stoica, S.R. Agnew, B. Clausen, D.E. Fielden, P.K. Liaw: Acta Mater. 56 (2008) 688.

DOI: 10.1016/j.actamat.2007.10.030

Google Scholar

[10] L. Wu, S.R. Agnew, D.W. Brown, G.M. Stoica, B. Clausen, A. Jain, D.E. Fielden, L. Chen, P.K. Liaw: Acta Mater. 56 (2008) 3699.

Google Scholar

[11] L. Chen, C. Wang, W. Wu, Z. Liu, G.M. Stoica, L. Wu, P.K. Liaw: Metall. Mater. Trans. A 38 (2007) 2235.

Google Scholar

[12] S.R. Agnew, M.H. Yoo, C.N. Tomé: Acta Mat. 49 (2001) 4277.

Google Scholar

[13] S.R. Agnew, D.W. Brown, C.N. Tomé: Acta Mater. 54 (2006) 4841.

Google Scholar

[14] B. Clausen, C.N. Tomé, D.W. Brown, S.R. Agnew: Acta Mater. 56 (2008) 2456.

Google Scholar

[15] S.R. Agnew, Ö. Duygulu: Int. J. Plast. 21 (2005) 1161.

Google Scholar

[16] S. Müller, K. Müller, T. Huichang, P. Wolter, W. Reimers, in Proceedings of the 7th International Conference Magnesium Alloys and Their Applications, edited by K.U. Kainer, Wiley-VCH, Weinheim (2006), 406.

Google Scholar

[17] M.A. Meyers, V. Vöhringer, A. Lubarda: Acta Mater. 49 (2001), 4025.

Google Scholar

[18] E. Macherauch, P. Müller: Z. Angewandte Phys. 13 (1961), 305.

Google Scholar

[19] J.D. Eshelby: Proc. R. Soc. London A 241 (1957), 376.

Google Scholar

[20] E. Kröner: Z. Phys. 151 (1958), 504.

Google Scholar

[21] M. Huppmann, S. Stark, W. Reimers, submitted to Int. J. Mater. Research, (2009).

Google Scholar