Combined Neutron and X-Ray Diffraction Analysis for the Characterization of a Case Hardened Disc

Jeremy Epp; Thomas Hirsch; Martin Hunkel; Robert C. Wimpory

doi:10.4028/www.scientific.net/MSF.652.37

Paper Titles

Intergranular Strains in Pre-Strained and Welded Pipes
p.13

Synchrotron Strain Mapping of the Residual Strain Distribution around Foreign Object Damage in Laser Shock Peened Ti-6AL-4V Alloy
p.19

Determination of the Residual Stress Field around Scratches Using Synchrotron X-Rays and Nanoindentation
p.25

Residual Stress Evaluation of Carburized Transmission Steel Gear Using Neutron and Synchrotron X-Ray Diffraction and Finite Element Methods
p.31

Combined Neutron and X-Ray Diffraction Analysis for the Characterization of a Case Hardened Disc
p.37

Numerical Modeling of Residual Stress and Prediction of Heat Affected Zone Induced by PTA Process
p.44

Through-Thickness Residual Stress Measurement by Neutron Diffraction in Cu+W Plasma Spray Coatings
p.50

Residual Strain Profiles in Alumina-Zirconia Ceramic Composites
p.57

Measuring Type II Stresses Using 3DXRD
p.63

HomeMaterials Science ForumMaterials Science Forum Vol. 652Combined Neutron and X-Ray Diffraction Analysis...

Combined Neutron and X-Ray Diffraction Analysis for the Characterization of a Case Hardened Disc

Abstract:

The present work has been executed within the framework of the collaborative research center on Distortion Engineering (SFB 570) in order to evaluate the residual stress state of a disc after carburizing and quenching as well as to validate a simulation procedure. The combined use of X-ray and neutron diffraction analysis provided information about the residual stress states in the whole cross section. However, the stress free lattice spacing d0 for the neutron diffraction experiments is problematic and induces systematic uncertainties in the results and the application of a force balance condition to recalculate d0 might be a solution for improving the reliability of the results. Comparison of experimental results with simulation showed that an overall satisfying agreement is reached but discrepancies are still present.

You might also be interested in these eBooks

Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation

View Preview

Info:

Periodical:

Materials Science Forum (Volume 652)

Pages:

37-43

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.652.37

Citation:

Cite this paper

Online since:

May 2010

Authors:

Jeremy Epp, Thomas Hirsch, Martin Hunkel, Robert C. Wimpory

Keywords:

Case Hardening, Neutron Diffraction, Residual Stress, Simulation, X-Ray Diffraction (XRD)

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] H. -W. Zoch: Proc. 1st Int. Conf. on Distortion Engineering, edited by H. -W. Zoch, Th. Lübben, Bremen (2005) pp.3-10.

Google Scholar

[2] F. Hoffmann, O. Kessler, Th. Lübben, P. Mayr: HTM 57 (2002) 3 pp.213-217.

Google Scholar

[3] H. Surm, F. Hoffmann: Proc. 2nd Int. Conf. on Distortion Engineering, edited by H. -W. Zoch, Th. Lübben, Bremen (2008) pp.189-198.

Google Scholar

[4] V. Hauk, in: Structural and residual stress analysis by nondestructive methods, Elsevier Science B.V., Amsterdam, (1997).

Google Scholar

[5] R.C. Wimpory, P. Mikula, J. Saroun, T. Poeste, J. Li, M. Hoffmann, R. Schneider: Neutron news, Vol. 19 Issue 1 (2008) pp.16-19.

Google Scholar

[6] T. Poeste, R.C. Wimpory, R. Schneider: Mat. Sci. Forum, Vol. 524-525 (2006) pp.223-228.

Google Scholar

[7] L. Cheng, A. Böttger, Th.H. de Keijser, E. j. Mittemeijer: Scripta Met. Vol. 24 (1990) pp.509-514.

Google Scholar

[8] B. Eigenmann, E. Macherauch: Mat. -wiss. u. Werkstofftech. 27 (1995) pp.426-437.

Google Scholar

[9] Sysweld Reference Manual, ESI (2009).

Google Scholar

[10] J. Lütjens, V. Heuer, F. König, Th. Lübben, V. Schulze, N. Trapp: Proc. 1st Int. Conf. on Distortion Engineering, edited by H. -W. Zoch, Th. Lübben, Bremen (2005) pp.269-279.

Google Scholar

[11] R. A. Winholtz, in: Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation, edited by M.E. Fritzpatrick, A. Lodini, Taylor & Francis, London (2003).

DOI: 10.1201/9780203608999

Google Scholar