Sustainable High Speed Dry Cutting of Magnesium Alloys
p.3
p.3
Investigations of Transient Machined Workpiece Surface Temperature in High Speed Peripheral Milling Using Inverse Method
p.14
p.14
Experimental Study on Turning of Titanium Matrix Composites with PCD Tools
p.20
p.20
Preliminary Study on Carbon Fibre Composites Cutting Technology and Cutting Tools
p.25
p.25
Research on the Effect of Low Temperature on the Performance of Drilling Carbon Fibre Reinforced Polymer and Ti Stack Materials
p.30
p.30
Experimental Study on Face Milling Austenitic Stainless Steel
p.35
p.35
Analytical Modeling to Predict Adiabatic Shear Critical Condition for Orthogonal Cutting
p.41
p.41
Research on the Cutting Fluid Effect on Cutting Force and Surface Roughness in Rotor Milling
p.50
p.50
Cutting Performance and Tool Failure in Intermittent Turning Processes of an Al2O3-Based Micro-Nano-Composite Ceramic Tool
p.56
p.56
Research on the Effect of Low Temperature on the Performance of Drilling Carbon Fibre Reinforced Polymer and Ti Stack Materials
Abstract:
The thermal conductivity of carbon fiber reinforced polymer(CFRP) and titanium alloy is lower which caused the increasing of drilling temperature and larger tool wear resistance. The low temperature air is aided for the drilling of laminated stack board of CFRP/Ti with double apex angles carbide drill at different feed rate. The drilling force and the quality of hole are analyzed. The results showed that the low temperature air can reduce the tool wear and the thrust force effectively.
You might also be interested in these eBooks
Info:
Periodical:
Materials Science Forum (Volume 723)
Pages:
30-34
Citation:
Online since:
June 2012
Authors:
Keywords:
Price:
Permissions: