Bearing Capacity of Common and Damaged CFRP-Strengthened R. C. Beams Subject to High-Level Low-Cycle Loading

Article Preview

Abstract:

In the course of operation or armed hostilities the span r.c. structures are subject to substantial damage and considerable reduction of their bearing capacity, especially under low-cycle repeated loading. In this connection it becomes necessary to renew their operation capacity and/or improve their bearing capacity. However, the current design standards contain no recommendations as to determination of the residual bearing capacity of such structures and calculation of their reinforcement. There are methods of the operation capacity renewal and reinforcement of the structures by increasing their sections adding metal or reinforced concrete elements. Still, the calculation methods of such reinforcement are also imperfect. It is proposed to renew operation capacity of such structures by strengthening their tensioned parts with CFRP; the performed experimental research will provide the basis for calculating bearing capacity of said structures with the aid of the deformation method improved by the authors.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

185-199

Citation:

Online since:

August 2019

Export:

Price:

* - Corresponding Author

[1] Posobie no proektirovaniyu betonnyih i zhelezobetonnyih konstruktsiy iz tyazhelogo betona bez predvaritelnogo napryazheniya armaturyi (k SP 52-101-2003), Moskva, (2005).

Google Scholar

[2] E.M. Babich, A.P. Pogorelyak, Prochnost betona posle deystviya malotsiklovoy szhimayuschey zagruzki, Izvestiya vuzov. Seriya: Stroitelstvo i arhitektura. 4 (1976). P.33-36.

Google Scholar

[3] E.M. Babich, O.M. Kuhnyuk, DeformatsIynI harakteristiki betonu pri osovomu malotsiklovomu stisku, VIsnik RIvnenskogo derzhavnogo tehnIchnogo unIversitetu. 2 (1999). P. 21-25.

Google Scholar

[4] E.M. Babich, Yu.A. Krus, Yu.N. Panchuk, Rabota melkozernistogo betona v usloviyah malotsiklovogo staticheskogo nagruzheniya, Izvestiya vuzov. Seriya: Stroitelstvo i arhitektura. 9 (1995). P. 26-32.

Google Scholar

[5] STO 13613997-001-2011 Standart organizatsii. Usilenie zhelezobetonnyih konstruktsiy kompozitnyimi materialami SikaR, OAO «TsNIIPromzdaniy», OOO «Zika», Moskva, (2011).

Google Scholar

[6] V. Karpiuk, A. Kostiuk, O. Maistrenko, Yu. Somina, Influence of intermittent cyclic loading on reinforced concrete resistance model, Electronic journal of the faculty of civil engineering of Osijek, Croatia. 15 (2017) 59-74.

DOI: 10.13167/2017.15.6

Google Scholar

[7] V.M. Karpyuk, Yu.A. SomIna, A.I. Kostyuk, O.F. Maystrenko, Osoblivosti napruzheno-deformovanogo stanu I rozrahunku zalIzobetonnih konstruktsiy za diyi tsiklichnogo navantazhennya visokih rivniv, ODABA, Odesa, (2018).

Google Scholar

[8] Baoguo Han, Xun Yu, Jinping Ou, Self-Sensing Concrete in Smart Structures, (2014).

Google Scholar

[9] N. Banthia, Fiber Reinforced Polymers in Concrete Construction and Advanced Repair Technologies, Materials of Conf. Inspection, Appraisal, Repairs and Maintenance of Buildings and Structures, (2003).

Google Scholar

[10] Klaus Friedrich, Ulf Breuer, Multifunctionality of Polymer Composites, Elsevier, (2015).

Google Scholar