Texture Evolution in Commercially Pure Al during Equal Channel Angular Extrusion (ECAE) as a Function of Processing Routes

Satyam Suwas; László S. Tóth; Jean-Jacques Fundenberger; André Eberhardt

doi:10.4028/www.scientific.net/SSP.105.357

Paper Titles

Pure Ni Single Crystal of Cube Orientation Deformed by Equal Channel Angular Extrusion
p.333

Rolling Texture of ECAP Processed Al and Cu
p.339

Texture Evolution in FCC Metals during Equal Channel Angular Extrusion (ECAE) as a Function of Stacking Fault Energy
p.345

Oblique Cube Texture Formation in High Purity Aluminum during Equal Channel Angular Pressing
p.351

Texture Evolution in Commercially Pure Al during Equal Channel Angular Extrusion (ECAE) as a Function of Processing Routes
p.357

Strain Localization Observed during Shearing of Some Aluminium Alloys and Texture Softening Predicted by FC Taylor and Advanced Lamel Model
p.363

Simulating the Temper Rolling of Galvanized Steel
p.371

Quantifying Domain Textures in Lead Zirconate Titanate Using 022:202 and 220 Diffraction Peaks
p.379

Combined Analysis of Bi2223 Superconducting Bulk Materials
p.385

HomeSolid State PhenomenaSolid State Phenomena Vol. 105Texture Evolution in Commercially Pure Al during...

Texture Evolution in Commercially Pure Al during Equal Channel Angular Extrusion (ECAE) as a Function of Processing Routes

Abstract:

FCC metals with different stacking fault energy (SFE), namely Al, Cu and Ag have been investigated for the evolution of crystallographic texture during ECAE deformation using Route A. Different materials with different SFE result in their characteristic textures. The results have been analysed on the basis of microstructural features and related established concepts on texture evolution in FCC metals during other deformation modes.