Surface Roughness and Topography of Honed Nickel-Based Superalloy

Chang Yong Yang; Yu Can Fu; Da Shun Huang; Jiu Hua Xu; Neng Ge Yang; Wen Yan

doi:10.4028/www.scientific.net/AMR.1136.478

Paper Titles

Nano-Precision Polishing of Oxygen-Free Copper Using MCF (Magnetic Compound Fluid) Slurry
p.455

Influence of Components on the Rheological Property of Shear Thickening Polishing Slurry
p.461

Development of Polishing Tool Capable of Self-Adaptive to Processing Site Using Steel Balls and Magnetic Force
p.466

Investigation of Abrasive Super Finishing under Various Paths with a 5-Axis Closed-Link Compact Robot and Fine Diamond Stone
p.472

Surface Roughness and Topography of Honed Nickel-Based Superalloy
p.478

Experimental Research on Flexible Polishing by Compound Diamond Powder
p.484

Ultraprecision Machining of Si₃N₄ Ceramics with Shear-Thickening Polishing
p.490

Surface and Subsurface Integrity of Glass-Ceramics Induced by Ultra-Precision Grinding
p.497

Wet-Etching Evaluation Method of Subsurface Damage after Grinding of Glass
p.503

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1136Surface Roughness and Topography of Honed...

Surface Roughness and Topography of Honed Nickel-Based Superalloy

Abstract:

Honing experiments were carried out for nickel-based superalloy Inconel718 bore. The significance analysis of the four honing parameters: spindle speed, stroke speed, wedge feed per stroke cycle and grain size on the surface roughness, was studied with the orthogonal design method. And the significant degree under the rated conditions was determined. The results showed that: wedge feed per stroke cycle and grain size have a significant influence on surface roughness while spindle speed and stroke speed had no significant effect. Also, there was a positive correlation between surface roughness and wedge feed per stroke cycle and grain size. Furthermore, the honed surface topography was analyzed by the meaning of microscope.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1136)

Pages:

478-483

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1136.478

Citation:

Cite this paper

Online since:

January 2016

Authors:

Chang Yong Yang*, Yu Can Fu, Da Shun Huang, Jiu Hua Xu, Neng Ge Yang, Wen Yan

Keywords:

Honing, Nickel-Based Superalloy, Surface Roughness, Topography

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Ezugwu EO, Wang ZM, Machado AR. The machinability of nickel-base alloys: a review. J Mater Process Technol. 86(1998) 1-16.

Google Scholar

[2] Yao CF, Jin QC, Huang XC, et al. Research on surface integrity of grinding Inconel 718. I Int J Adv Manuf Technol 65(2013) 1019-1030.

Google Scholar

[3] Qu NS, Xu ZY. Improving machining accuracy of electrochemical machining blade by optimization of cathode feeding directions. Int J Adv Manuf Technol 68(2013) 1565-72.

DOI: 10.1007/s00170-013-4943-8

Google Scholar

[4] Chen ZZ, Xu JH, Ding WF, et al. Grinding performance evaluation of porous composite-bonded CBN wheels for Inconel 718. Chin J Aeronaut 27(2014) 1022-1029.

DOI: 10.1016/j.cja.2014.03.015

Google Scholar

[5] Irene Buj-Corral, Joan Vivancos-Calvet, Milton Coba-Salcedo. Modelling of surface finish and material removal rate in rough honing. Precision Engin 38 (2014) 100-108.

DOI: 10.1016/j.precisioneng.2013.07.009

Google Scholar

[6] Damir S. Vrac, Leposava P. Sidjanin, Pavel P. Kovac, et al. The influence of honing process parameters on surface quality, productivity, cutting angle and coefficients of friction. Industrial Lubrication and Tribology 64(2012) 77-83.

DOI: 10.1108/00368791211208679

Google Scholar

[7] Dirk Bähre, Christina Schmitt, Uwe Moos. Analysis of the Differences between Force Control and Feed Control Strategies during the Honing of Bores. Procedia CIRP 1 (2012) 377-381.

DOI: 10.1016/j.procir.2012.04.067

Google Scholar

[8] Schmitt C, Bähre D, Forsch K, Klein H. Feinstbearbeiten hochgenauer Bohrungen durch Honen. Jahrbuch Schleifen, Honen, Läppen und Polieren/65. Ausgabe; (2011).

Google Scholar

[9] Montgomery DC. Design and analysis of experiments. 6th ed. New York: John Wiley & Sons, (2005).

Google Scholar