|
|
Reference
|
|
2   
|
Beskok, A., Karniadakis, G.E., Trimmer, W. (1996) Rarefaction and Compressibility Effects in Gas Microflows. Journal of Fluids Engineering, 118(3): 448
|
|
3
|
de Simone, M.C., Guida, D. (2015) Dry friction influence on structure dynamics. u: Proceedings of the 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), Athens: ECCOMAS, str. 4483-4491
|
|
3
|
Formato, A., Ianniello, D., Villecco, F., Lenza, T., Guida, D. (2017) Design optimization of the plough working surface by computerized mathematical model. Emirates Journal of Food and Agriculture, 29(1): 36
|
|
3
|
Ghomshei, M., Villecco, F., Porkhial, S., Pappalardo, M. (2009) Complexity in Energy Policy: A Fuzzy Logic Methodology. u: 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery, Institute of Electrical and Electronics Engineers (IEEE), str. 128-131
|
|
1
|
Ghomshei, M., Villecco, F. (2009) Energy Metrics and Sustainability. u: Gervasi, Osvaldo; Taniar, David; Murgante, Beniamino; Laganà, Antonio; Mun, Youngsong; Gavrilova, Marina L. [ur.] International Conference on Computational Science and Its Applications, Berlin, Heidelberg: Springer Nature, str. 693-698
|
|
8
|
Gross, A.W. (1992) Gas film lubrication. New York: John Wiley and Sons
|
|
1
|
Guida, D., Nilvetti, F., Pappalardo, C-M. (2013) Adjoint-based Optimal Control Design for a Cart Pendulum System with Dry Friction. u: Programme and Proceedings of ECCOMAS Thematic Conference on Multibody Dynamics, Zagreb, Croatia, July 1-4, pp. 269-285
|
|
3
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2013) Optimal control design by adjoint-based optimization for active mass damper with dry friction. u: Programme and Proceedings of COMPDYN 2013 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 12-14 June, Kos Island, Greece, pp. 1-19
|
|
3
|
Guida, D., Pappalardo, C.M. (2015) Control Design of an Active Suspension System for a Quarter-Car Model with Hysteresis. Journal of Vibration Engineering and Technologies, 3(3), pp. 277-299
|
|
3
|
Guida, D., Pappalardo, C.M. (2009) Sommerfeld and Mass Parameter Identification of Lubricated Journal Bearing. WSEAS Transactions on Applied and Theoretical Mechanics, 4(4), pp. 205-214
|
|
3
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2009) Parameter Identification of a Two Degrees of Freedom Mechanical System. International Journal of Mechanics, 3(2), pp. 23-30
|
|
3
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2009) Instability Induced by Dry Friction. International Journal of Mechanics, 3(3), pp. 44-51
|
|
2
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2011) Experimental investigation on a new hybrid mass damper. u: Programme and Proceedings of 8th International Conference on Structural Dynamics (EURODYN 2011), July 4-6, Leuven, Belgium, pp. 1644-1649
|
|
2
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2011) Mass, stiffness and damping identification of a two-story building model. u: Programme and Proceedings of 3rd ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), May 25-28, Corfu, Greece, pp. 25-28
|
|
2
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2009) On parameter identification of linear mechanical systems. u: Programme and Proceedings of 3rd International Conference on Applied Mathematics, Simulation, Modelling (ASM 09), December 29-31, Vouliagmeni Beach, Athens, Greece, pp. 55-60
|
|
4
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2009) Dry Friction Influence on Cart Pendulum Dynamics. International Journal of Mechanics, 3(2), pp. 31-38
|
|
2
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2010) Friction induced vibrations of a two degrees of freedom system. u: Programme and Proceedings of 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology (ROCOM 10), April 11-13, Hangzhou, China, pp. 133-136
|
|
2
|
Guida, D., Nilvetti, F., Pappalardo, C.M. (2009) Dry friction influence on inverted pendulum control. u: Programme and Proceedings of 3rd International Conference on Applied Mathematics, Simulation, Modelling (ASM 09), December 29-31, Vouliagmeni Beach, Athens, Greece, pp. 49-54
|
|
3
|
Guida, D., Pappalardo, C.M. (2014) Forward and inverse dynamics of nonholonomic mechanical systems. Meccanica, 49(7): 1547-1559
|
|
7 
|
Guida, D., Pappalardo, C.M. (2013) A new control algorithm for active suspension systems featuring hysteresis. FME Transactions, vol. 41, br. 4, str. 285-290
|
|
3
|
Kulkarni, S., Pappalardo, C.M., Shabana, A.A. (2016) Pantograph/Catenary Contact Formulations. Journal of Vibration and Acoustics, 139(1): 011010
|
|
3
|
Lancaster, J.K. (1957) Severe metallic wear. u: Lubrication and Wear, Conference, 01-03.10.1957, London, Proceedings, pp. 1-7 or Paper 72
|
|
|
Pappalardo, C.M., Guida, D. (2017) Dynamic analysis of planar rigid multibody systems modeled using natural absolute coordinates. Acta Mechanica, Submitted
|
|
|
Pappalardo, C.M., Guida, D. (2017) A timedomain system identification numerical procedure for obtaining linear dynamical models of multibody mechanical systems. Meccanica, Submitted
|
|
|
Pappalardo, C.M., Guida, D. (2017) Theoretical derivation and numerical implementation of the adjoint method for optimal control of nonlinear mechanical systems. FME Transactions, Submitted
|
|
3
|
Pappalardo, C.M., Guida, D. (2017) Adjoint-Based Optimization Procedure for Active Vibration Control of Nonlinear Mechanical Systems. Journal of Dynamic Systems, Measurement, and Control, 139(8): 081010
|
|
2
|
Pappalardo, C.M., Guida, D. (2017) Control of nonlinear vibrations using the adjoint method. Meccanica, 52(11-12): 2503-2526
|
|
2
|
Pappalardo, C.M., Guida, D. (2017) On the use of two-dimensional Euler parameters for the dynamic simulation of planar rigid multibody systems. Archive of Applied Mechanics, 87(10): 1647-1665
|
|
3
|
Pappalardo, C.M., Wallin, M., Shabana, A.A. (2016) A New ANCF/CRBF Fully Parameterized Plate Finite Element. Journal of Computational and Nonlinear Dynamics, 12(3), pp. 1-13
|
|
2
|
Pappalardo, C.M., Patel, M., Tinsley, B., Shabana, A.A. (2015) Pantograph/Catenary Contact Force Control. u: Proceedings of the ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2015, Boston, Massachusetts, USA, August 2-5, ASME International, str. V006T10A028
|
|
3
|
Pappalardo, C.M., Patel, M.D., Tinsley, B., Shabana, A.A. (2016) Contact force control in multibody pantograph/catenary systems. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 230(4): 307-328
|
|
1
|
Pappalardo, C.M., Guida, D. (2018) On the Lagrange multipliers of the intrinsic constraint equations of rigid multibody mechanical systems. Archive of Applied Mechanics, 88(3): 419-451
|
|
2
|
Pappalardo, C.M., Wang, T., Shabana, A.A. (2017) Development of ANCF tetrahedral finite elements for the nonlinear dynamics of flexible structures. Nonlinear Dynamics, 89(4): 2905-2932
|
|
2
|
Pappalardo, C.M., Wang, T., Shabana, A.A. (2017) On the formulation of the planar ANCF triangular finite elements. Nonlinear Dynamics, 89(2): 1019-1045
|
|
3
|
Pappalardo, C.M., Yu, Z., Zhang, X., Shabana, A.A. (2016) Rational ANCF Thin Plate Finite Element. Journal of Computational and Nonlinear Dynamics, 11(5): 051009
|
|
3
|
Pappalardo, C.M. (2015) A natural absolute coordinate formulation for the kinematic and dynamic analysis of rigid multibody systems. Nonlinear Dynamics, 81(4): 1841-1869
|
|
3
|
Pellegrino, A., Villecco, F. (2010) Design Optimization of a Natural Gas Substation with Intensification of the Energy Cycle. Mathematical Problems in Engineering, 2010: 1-10
|
|
3
|
Ruggiero, A., de Simone, M.C., Russo, D., Guida, D. (2016) Sound Pressure Measurement of Orchestral Instruments in the Concert Hall of a Public School. International Journal of Circuits, Systems and Signal Processing, 10, pp. 75-812
|
|
1
|
Sansone, F., Picerno, P., Mencherini, T., Villecco, F., d`Ursi A.M., Aquino, R.P., Lauro, M.R. (2011) Flavonoid microparticles by spray-drying: Influence of enhancers of the dissolution rate on properties and stability. Journal of Food Engineering, 103(2): 188-196
|
|
1
|
Sena, P., d`Amore M., Pappalardo, M., Pellegrino, A., Fiorentino, A., Villecco, F. (2013) Studying the influence of cognitive load on driver's performances by a Fuzzy analysis of Lane Keeping in a drive simulation. IFAC Proceedings Volumes, 46(21): 151-156
|
|
1
|
Sena, P., Attianese, P., Pappalardo, M., Villecco, F. (2013) FIDELITY: Fuzzy Inferential Diagnostic Engine for on-LIne supporT to phYsicians. u: Toi, Vo Van; Toan, Nguyen Bao; Dang Khoa, Truong Quang; Lien Phuong, Tran Ha [ur.] 4th International Conference on Biomedical Engineering in Vietnam, Berlin, Heidelberg: Springer Nature, str. 396-400
|
|
3
|
Sena, P., Attianese, P., Carbone, F., Pellegrino, A., Pinto, A., Villecco, F. (2012) A Fuzzy Model to Interpret Data of Drive Performances from Patients with Sleep Deprivation. Computational and Mathematical Methods in Medicine, 2012: 1-5
|
|
4
|
Stachowiak, G.W. (1997) Numerical characterization of wear particle morphology. u: Hutchings I.M. [ur.] New Directions in Tribology, Bury St Edmunds: Mechanical Engineering Publications Ltd, pp. 371-389
|
|
4
|
Stokes, J. (2003) Production of coated and free-standing engineering components using the HVOF (high velocity oxy-fuel) process. Dublin: School of Mechanical and Manufacturing Engineering, Dublin City University, PhD thesis
|
|
1
|
Zhai, Y., Liu, L., Lu, W., Li, Y., Yang, S., Villecco, F. (2010) The Application of Disturbance Observer to Propulsion Control of Sub-mini Underwater Robot. u: Hutchison, David; Kanade, Takeo; Kittler, Josef; Kleinberg, Jon M.; Mattern, Friedemann; Mitchell, John C.; Naor, Moni; Nierstrasz, Oscar; Pandu Rangan, C.; Steffen, Bernhard; Sudan, Madhu; Terzopoulo [ur.] International Conference on Computational Science and Its Applications, Berlin, Heidelberg: Springer Nature, str. 590-598
|
|
3
|
Zhang, Y., Li, Z., Gao, J., Hong, J., Villecco, F., Li, Y. (2012) A Method for Designing Assembly Tolerance Networks of Mechanical Assemblies. Mathematical Problems in Engineering, 2012: 1-26
|
|
|
|
|