- citati u SCIndeksu: [2]
- citati u CrossRef-u:0
- citati u Google Scholaru:[]
- posete u poslednjih 30 dana:12
- preuzimanja u poslednjih 30 dana:12
|
|
2015, vol. 9, br. 1, str. 36-45
|
Određivanje maksimalne defleksije kod poprečno savijenih ploča u obliku paralelograma upotrebom interpolacione tehnike odnosa konformalnog radijusa
Determination of maximum deflection at cross bending parallelogram plates using conformal radius ratio interpolation technique
State University - Education-Science-Production Complex, Orel, Russia
e-adresa: suwin@yandex.ru
Ključne reči: ploče u obliku paralelograma; poprečno savijanje; maksimalna defleksija; odnos konformalnog radijusa; tehnika interpolacije faktora oblika
Keywords: parallelogram plates; cross bending; maximum deflection; conformal radius ratio; form factor interpolation technique
Sažetak
U radu se opisuje poprečno savijanje elastičnih prosto oslonjenih izotropnih ploča i ploča sa uklještenom ivicom pri ravnomerno raspoređenom opterećenju. Predlaže se upotreba tehnike interpolacije faktora oblika kako bi se odredila vrednost maksimalne defleksije ploče; i odnos unutrašnjeg i spoljašnjeg konformalnog radijusa kao geometrijskog argumenta jer se predlaže da se geometrijski argument upotrebi umesto faktora oblika. Ovakva zamena omogućava veću tačnost.
Abstract
In the article the task of cross bending of elastic isotropic plates with simply supported and clamped edge from the action of evenly distributed load is described. It is suggested to use form factor interpolation technique to determine the value of maximum plate deflection; and the ratio of inner conformal radius to the outer as a geometric argument is proposed to be used instead of form factor. Such replacement allows the increase of the technique accuracy.
|
|
|
Reference
|
|
*** (2011) ANSYS 14.0. ANSYS, Inc. Southpointe, pp. 2498
|
|
Harari, I., Sokolov, I., Krylov, S. (2011) Consistent loading for thin plates. Journal of Mechanics of Materials and Structures, 6(5): 765-790
|
|
Korobko, A.V. (1999) Geometrical modeling of region form in the two-dimensional problems of elasticity theory. Moscow: ASV Publishing, in Russian
|
|
Korobko, V.I. (1994) State and developing isoperimetric technique in structural mechanics. u: The second international conference: Current problems of fundamental sciences, Moscow, Proceedings of, II, 60-71
|
|
Korobko, V.I., Chernyaev, A.A. (2011) Problem calculation of cross-section bend of plates with usage of conformal radiuses. Construction mechanics and calculation of constructions, 6: 16-22
|
|
Marti, P. (2013) Theory of structures: Fundamentals, framed structures, plates and shells. John Wiley & Sons, Inc, pp: 679
|
1
|
Polya, G., Szego, G. (1951) Isoperimetric inequalities in mathematical physics. Princeton University Press, pp: 280
|
1
|
Reddy, J.N. (2006) An introduction to the finite element method. McGraw-Hill, pp: 424
|
|
Sadd, M.H. (2014) Elasticity: Theory, applications, and numerics. Academic Press, pp: 473
|
|
Zienkiewicz, O.C., Taylor, R.L., Fox, D.D. (2014) The finite element method for solid and structural mechanics. Elsevier, pp: 657
|
|
|
|