nach oben

Cellulose

Erschienen in:

14.05.2020 | Original Research

Lipase-catalyzed laurate esterification of cellulose nanocrystals and their use as reinforcement in PLA composites

verfasst von: Yuanyuan Yin, Lucian A. Lucia, Lokendra Pal, Xue Jiang, Martin A. Hubbe

Erschienen in: Cellulose | Ausgabe 11/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cellulose nanocrystals (CNCs) were surface-modified using immobilized lipase (Novozyme 435) to catalyze the formation of laurate ester groups on the CNC surface and thus facilitate homogeneous dispersion within a poly(lactic acid) (PLA) matrix. Results of dynamic contact angle measurement revealed that the modified CNCs (CNC-LAA) presented greater hydrophobicity than their CNC controls. FT-IR, ¹³C-NMR, XRD, and TGA were used to characterize the structure and stability of the CNCs before and after modification. PLA reinforced with the modified CNCs were prepared, and the effect on mechanical properties was studied. SEM micrographs suggested uniform dispersion of modified CNCs throughout the PLA matrix at a maximum 1 wt% loading, which was found to be the optimal loading level. The CNC-LAA were able to achieve a 0.4 maximum degree of substitution. DSC indicated enhanced crystallization of PLA chains due to the inclusion of CNC-LAA, indicating that the nanofillers behaved as nucleating agents and also revealed improved compatibility. Tensile strength tests showed slightly improved mechanical properties for breaking strength and elongation at breakage.

Vorheriger Artikel Synergistic reinforcing effect of nano-montmorillonite and cellulose nanocrystals on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Nächster Artikel Engineering the interfacial chemistry and mechanical properties of cellulose-reinforced epoxy composites using atomic layer deposition (ALD)

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Afrin S, Karim Z (2017) Isolation and surface modification of nanocellulose: necessity of enzymes over chemicals. Chem Bio Eng Rev 4(5):289–303

Amaliyah S, Prasetyawan S, Marduaba D, Roosdiana A (2016) Synthesis and characterization of cellulose stearate ester from bacterial cellulose and stearic acid enzymatically using immobilized lipase. Molekul 11(2):256–264

Azouz KB, Ramires EC, Fonteyne WVD, Kissi NE, Dufresne A (2012) Simple method for the melt extrusion of a cellulose nanocrystal reinforced hydrophobic polymer. ACS Macro Lett 1(1):236–240

Bagheriasl D, Carreau PJ, Dubois C, Riedl B (2015) Properties of polypropylene and polypropylene/poly(ethylene-co-vinyl alcohol) blend/CNC nanocomposites. Compos Sci Technol 117:357–363

Bates S, Zografi G, Engers D, Morris K, Crowley K, Newman A (2006) Analysis of amorphous and nanocrystalline solids from their X-ray diffraction patterns. Pharm Res 23(10):2333–2349

Boujemaoui A, Mazières S, Malmström E, Destarac M, Carlmark A (2016) SI-RAFT/MADIX polymerization of vinyl acetate on cellulose nanocrystals for nanocomposite applications. Polymer 99:240–249

Bozic M, Vivod V, Kavcic S, Leitgeb M, Kokol V (2015) New findings about the lipase acetylation of nanofibrillated cellulose using acetic anhydride as acyl donor. Carbohydr Polym 125:340–351

Chaitanya PK, Prabhu P (2014) Stability and acitvity of porcine lipase against temperature and chemical denaturants. Appl Biochem Biotechnol 174(8):2711–2724

Chen L, Wang Q, Hirth K, Baez C, Agarwal UP, Zhu JY (2015) Tailoring the yield and characteristics of wood cellulose nanocrystals (CNC) using concentrated acid hydrolysis. Cellulose 22(3):1753–1762

Frone AN, Berlioz S, Chailan JF, Panaitescu DM (2013) Morphology and thermal properties of PLA-cellulose nanofibers composites. Carbohydr Polym 91(1):377–384

Gardner DJ, Oporto GS, Mills R, Samir MASA (2008) Adhesion and surface issues in cellulose and nanocellulose. J Adhes Sci Technol 22(5–6):545–567

Gazzotti S, Farina H, Lesma G, Rampazzo R, Piergiovanni L, Ortenzi MA et al (2017) Polylactide/cellulose nanocrystals: the in situ polymerization approach to improved nanocomposites. Eur Polym J 94:173–184

Gremos S, Zarafeta D, Kekos D, Kolisis F (2011) Direct enzymatic acylation of cellulose pretreated in BMIMCl ionic liquid. Bioresour Technol 102(2):1378–1382

Gremos S, Keos D, Kolisis F (2012) Supercritical carbon dioxide bioctalysis as a novel and green methodology for the enzymatic acylation of fibrous cellulose in one step. Bioresour Technol 115:96–101

Guo J, Guo X, Wang S, Yin Y (2016) Effects of ultrasonic treatment during acid hydrolysis on the yield, particle size and structure of cellulose nanocrystals. Carbohydr Polym 135(4):248–255

Habibi Y, Dufresne A (2008) Highly filled bionanocomposites from functionalized polysaccharide nanocrystals. Biomacromolecules 9(7):1974–1980

Hendrick E, Frey M (2014) Increasing surface hdyrophilicity in poly(lactic acid) electrospun fibers by addition of PLA-b-PEG co-polymers. J Eng Fiber Fabr 9(2):153–164

Hossain KMZ, Ahmed I, Parsons AJ, Scotchford CA, Walker GS, Thielemans W et al (2012) Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid). J Mater Sci 47(6):2675–2686

Hu Z, Ballinger S, Pelton R, Cranston ED (2015) Surfactant-enhanced cellulose nanocrystal pickering emulsions. J Colloid Interfaces Sci 439:139–148

Hubbe MA, Rojas OJ, Lucia LA (2015) Green modification of surface characteristics of cellulosic materials at the molecular or nano scale: a review. BioResources 10(3):6095–6229

Iqbal HM, Kyazze G, Tron T, Keshavarz T (2014) “One-pot” synthesis and characterisation of novel P(3HB)-ethyl cellulose based graft composites through lipase catalysed esterification. Polym Chem UK 5(24):7004–7012

Iwamoto S, Kai W, Isogai A, Iwata T (2009) Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10(9):2571–2576

Jahan Z, Niazi MBK, Gregersen ØW (2017) Mechanical, thermal and swelling properties of cellulose nanocrystals/PVA nanocomposites membranes. J Ind Eng Chem 57:113–124

Kaboorani A, Riedl B (2015) Surface modification of cellulose nanocrystals (CNC) by a cationic surfactant. Ind Crop Prod 65:45–55

Khoo RZ, Ismail H, Chow WS (2016) Thermal and morphological properties of poly(lactic acid)/nanocellulose nanocomposites. Procedia Chem 19:788–794

Kloser E, Gray DG (2010) Surface grafting of cellulose nanocrystals with poly(ethylene oxide) in aqueous media. Langmuir 26(16):13450–13456

Lee JH, Park TG, Park HS, Lee DS, Lee YK, Yoon SC et al (2003) Thermal and mechanical characteristics of poly(l-lactic acid) nanocomposite scaffold. Biomaterials 24(16):2773–2778

Lee KY, Aitomaki Y, Berglund LA, Oksman K, Bismarck A (2014) On the use of nanocellulose as reinfocement in polymer matrix composites. Compos Sci Technol 105:15–27

Lenze CJ, Peksa CA, Sun WM, Hoeger IC, Salas C, Hubbe MA (2016) Intact and broken cellulose nanocrystals as model nanoparticles to promote dewatering and fine-particle retention during papermaking. Cellulose 23(6):3951–3962

Li Y, Sun XS (2011) Nanocomposites of poly(lactic acid) and surface-grafted MgO nanoparticles: preparation and characterization. J Biobased Mater Biol 5(4):452–459

Liu Z, Chen Y, Ding W (2016) Preparation, dynamic rheological behavior, crystallization, and mechanical properties of inorganic whiskers reinforced polylactic acid/hydroxyapatite nanocomposites. J Appl Polym Sci 133(18):1–11

Liu B, Yang D, Man H, Liu Y, Chen H, Xu H et al (2017) A green pickering emulsion stabilized by cellulose nanocrystals via RAFT polymerization. Cellulose 25(1):77–85

Lizundia E, Vilas JL, León LM (2015) Crystallization, structural relaxation and thermal degradation in poly(l-lactide)/cellulose nanocrystal renewable nanocomposites. Carbohydr Polym 123(6):256–265

Mangalam AP, Simonsen J, Benight AS (2009) Cellulose/DNA hybrid nanomaterials. Biomacromolecules 10(3):497–504

Mariano AP, Qureshi N, Marciel R, Ezeji TC (2011) Bioproduction of butanol in bioreactors: new insights from simultaneous in situ butanol recovery to eliminate product toxicity. Biotechnol Bioeng 108(8):1757–1765

Morelli CL, Belgacem MN, Branciforti MC, Marie CBS, Bras J, Bretas RES (2016) Nanocomposites of PBAT and cellulose nanocrystals modified by in situ polymerization and melt extrusion. Polym Eng Sci 56(12):1339–1348

Nam S, French AD, Condon BD, Concha M (2016) Segal crystallinity index revisited by the simulation of X-ray diffraction patterns of cotton cellulose Iβ and cellulose II. Carbohydr Polym 135:1–9

Nampoothiri KM, Nair NR, John RP (2010) An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 101(22):8493–8501

Pereda M, El KN, Dufresne A (2014) Extrusion of polysaccharide nanocrystal reinforced polymer nanocomposites through compatibilization with poly(ethylene oxide). ACS Appl Mater Interfaces 6(12):9365–9375

Pracella M, Haque MM, Paci M, Alvarez V (2016) Property tuning of poly(lactic acid)/cellulose bio-composites through blending with modified ethylene-vinyl acetate copolymer. Carbohydr Polym 137:515–524

Ramontja J, Ray SS, Pillai SK, Luyt AS (2010) High-performance carbon nanotube‐reinforced bioplastic. Macromol Mater Eng 294(12):839–846

Ran X, Jia Z, Han C, Yang Y, Dong L (2010) Thermal and mechanical properties of blends of polylactide and poly(ethylene glycol-co‐propylene glycol): influence of annealing. J Appl Polym Sci 116(4):2050–2057

Raquez JM, Habibi Y, Murariu M, Dubois P (2013) Polylactide (PLA)-based nanocomposites. Prog Polym Sci 38(10–11):1504–1542

Roman M, Winter WT (2004) Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5(5):1671–1677

Scillipoti J, Nioi C, Marty A, Camy S, Condoret JS (2017) Prediction of conversion at equilibrium for lipase esterification in two-phase systems. Biochem Eng J 117:162–171

Segal L, Creely JJ Jr, Conrad AEM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29(10):786–794

Tang YJ, Yang SJ, Zhang N, Zhang JH (2014) Preparation and characterization of nanocryslline cellulose via low-intensity ultrasonic-assisted sulfuric acid hydrolysis. Cellulose 21(1):335–346

Yan S, Yin J, Yang J, Chen X (2007) Structural characteristics and thermal properties of plasticized poly(l-lactide)-silica nanocomposites synthesized by sol–gel method. Mater Lett 61(13):2683–2686

Yin Y, Tian X, Jiang X, Wang H, Gao W (2016) Modification of cellulose nanocrystal via SI-ATRP of styrene and the mechanism of its reinforcement of polymethylmethacrylate. Carbohydr Polym 142:206–212

Yin Y, Zhao L, Jiang X, Wang H, Gao W (2017) Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals. Cellulose 24(11):4773–4784

Yin Y, Zhao L, Jiang X, Wang H, Gao W (2018) Cellulose nanocrystals modified with a triazine derivative and their reinforcement of poly(lacticacid)-based bionanocomposites. Cellulose 2018(25):2965–2976

Yoon KR, Kim Y, Choi IS (2005) Mechanistic study on Sn(Oct)₂-catalyzed, ring-opening polymerization of ρ-dioxanone by surface-initiated polymerization and X-ray photoelectron spectroscopy. J Polym Res 11(4):265–268

Zhang C, Salick MR, Cordie TM, Ellingham T, Dan Y, Turng LS (2015) Incorporation of poly(ethylene glycol) grafted cellulose nanocrystals in poly(lactic acid) electrospun nanocomposite fibers as potential scaffolds for bone tissue engineering. Mater Sci Eng C 49(39):463–471

Zhang X, Zhang J, Dong L, Ren S, Wu Q, Lei T (2017) Thermoresponsive poly(poly(ethylene glycol) methylacrylate)s grafted cellulose nanocrystals through SI-ATRP polymerization. Cellulose 24(10):4189–4203

Zhang Z, Sèbe G, Wang X, Tam KC (2018) Gold nanoparticles stabilized by poly(4-vinylpyridine) grafted cellulose nanocrystals as efficient and recyclable catalysts. Carbohydr Polym 182:61–68

Zhao GL, Wang FL, Lang XF, He BH, Li JR, Li XF (2017) Facile one-pot fabrication of cellulose nanocrystals and enzymateic synthesis of its esterified derivative in mixed ionic liquids. RSC Adv 7(43):27017–27023

Titel: Lipase-catalyzed laurate esterification of cellulose nanocrystals and their use as reinforcement in PLA composites
verfasst von: Yuanyuan Yin
Lucian A. Lucia
Lokendra Pal
Xue Jiang
Martin A. Hubbe
Publikationsdatum: 14.05.2020
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 11/2020
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-020-03225-3

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 11/2020

Durable and recyclable Ag/AgCl/CeO2 coated cotton fabrics with enhanced visible light photocatalytic performance for degradation of dyes

Optimization of cellulase production by a novel endophytic fungus Pestalotiopsis microspora TKBRR isolated from Thalakona forest

Cellulose nanofibril (CNF) based aerogels prepared by a facile process and the investigation of thermal insulation performance

Kinetics and equilibrium adsorption of methylene blue onto cotton gin trash bioadsorbents

Naturally occurring betaine grafted on cotton fabric for achieving antibacterial and anti-protein adsorption functions

Textile sensors for wearable applications: a comprehensive review