Skip to main content
Erschienen in: Microsystem Technologies 4/2020

29.10.2019 | Technical Paper

Local electroplating deposition for free-standing micropillars using a bias-modulated scanning ion conductance microscope

Erschienen in: Microsystem Technologies | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A local electroplating metal microdeposition process with a fine positioning mechanism on a nanopipette was developed. The fine positioning was achieved with a bias-modulated scanning ion conductance microscope (BM-SICM) using a single-aperture nanopipette. Using the modulated sensing signal (e.g., sinusoidal signal), the deposition by electroplating was prevented during the positioning. To demonstrate the deposition process, simple micropillars were fabricated. In a single-step deposition process, an array of copper pillars with diameters of 4.3–5.1 μm and lengths of 20 μm was fabricated. The disconnection of the pillars during the fabrication process occurred at fabrication velocities higher than 0.82 μm/s. To enable deposition without a closed-loop control, a multistep deposition process was introduced by repeating the deposition process and fine positioning steps at the growing end of the pillar. Using this multistep deposition process high-aspect pillars that were connected in 21 and 9 cycles were fabricated with the DC voltage of 0.7 and 1.0 V, respectively at a velocity of 0.82 μm/s. This simple deposition technology with BM-SICM will contribute to microfabrication technologies.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
Zurück zum Zitat Ahn BY, Duoss EB, Motala MJ, Guo X, Park S, Xiong Y, Yoon J, Nuzzo RG, Rogers JA, Lewis JA (2009) Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323:1590–1593CrossRef Ahn BY, Duoss EB, Motala MJ, Guo X, Park S, Xiong Y, Yoon J, Nuzzo RG, Rogers JA, Lewis JA (2009) Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323:1590–1593CrossRef
Zurück zum Zitat An S, Jhe W (2015) Fabrication and characterization of Au nanoparticle-aggregated nanowires using nanomeniscus-induced colloidal stacking method. Nano Micro Lett 7:27–34CrossRef An S, Jhe W (2015) Fabrication and characterization of Au nanoparticle-aggregated nanowires using nanomeniscus-induced colloidal stacking method. Nano Micro Lett 7:27–34CrossRef
Zurück zum Zitat An S, Stambaugh C, Kim G, Lee M, Kim Y, Lee K, Jhe W (2012) Low-volume liquid delivery and nanolithography using an nanopipette combined with a quartz tuning fork-atomic force microscope. Nanoscale 4:6493CrossRef An S, Stambaugh C, Kim G, Lee M, Kim Y, Lee K, Jhe W (2012) Low-volume liquid delivery and nanolithography using an nanopipette combined with a quartz tuning fork-atomic force microscope. Nanoscale 4:6493CrossRef
Zurück zum Zitat An S, Lee K, Kim B, Noh H, Kim J, Kwon S, Lee M, Hong M, Jhe W (2015) Nanopipette combined with quartz tuning fork-atomic force microscope for force spectroscopy/microscopy and liquid delivery-based nanofabrication. Rev Sci Instrum 85:033702CrossRef An S, Lee K, Kim B, Noh H, Kim J, Kwon S, Lee M, Hong M, Jhe W (2015) Nanopipette combined with quartz tuning fork-atomic force microscope for force spectroscopy/microscopy and liquid delivery-based nanofabrication. Rev Sci Instrum 85:033702CrossRef
Zurück zum Zitat El-Giar EM, Said RA, Bridges GE, Thomson DJ (2000) Localized electrochemical deposition of copper microstructures. J Electrochem Soc 147:586–591CrossRef El-Giar EM, Said RA, Bridges GE, Thomson DJ (2000) Localized electrochemical deposition of copper microstructures. J Electrochem Soc 147:586–591CrossRef
Zurück zum Zitat Grüter RR, Dielacher B, Hirt L, Vörös J, Zambelli T (2015) Patterning gold nanoparticles in liquid environment with high ionic strength for local fabrication of up to 100 μm long metallic interconnections. Nanotechnology 26:175301CrossRef Grüter RR, Dielacher B, Hirt L, Vörös J, Zambelli T (2015) Patterning gold nanoparticles in liquid environment with high ionic strength for local fabrication of up to 100 μm long metallic interconnections. Nanotechnology 26:175301CrossRef
Zurück zum Zitat Hansma PK, Drake B, Marti O, Gould SA, Prater CB (1989) The scanning ion-conductance microscope. Science 243:641–643CrossRef Hansma PK, Drake B, Marti O, Gould SA, Prater CB (1989) The scanning ion-conductance microscope. Science 243:641–643CrossRef
Zurück zum Zitat Hirt L, Ihle S, Pan Z, Dorwling-Carter L, Reiser A, Wheeler JM, Spolenak R, Vörös J, Zambelli T (2016) Template-free 3D microprinting of metals using a force-controlled nanopipette for layer-by-layer electrodeposition. Adv Mater 28:2311–2315CrossRef Hirt L, Ihle S, Pan Z, Dorwling-Carter L, Reiser A, Wheeler JM, Spolenak R, Vörös J, Zambelli T (2016) Template-free 3D microprinting of metals using a force-controlled nanopipette for layer-by-layer electrodeposition. Adv Mater 28:2311–2315CrossRef
Zurück zum Zitat Hu J, Yu M (2010) Meniscus-confined three-dimensional electrodeposition for direct writing of wire bonds. Science 329:313–316CrossRef Hu J, Yu M (2010) Meniscus-confined three-dimensional electrodeposition for direct writing of wire bonds. Science 329:313–316CrossRef
Zurück zum Zitat Ito S, Iwata F (2011) Nanometer-scale deposition of metal plating using a nanopipette probe in liquid condition. Jpn J Appl Phys 50:08LB15CrossRef Ito S, Iwata F (2011) Nanometer-scale deposition of metal plating using a nanopipette probe in liquid condition. Jpn J Appl Phys 50:08LB15CrossRef
Zurück zum Zitat Je JH, Kim J, Jaworski J (2017) Progression in the fountain pen approach: from 2D writing to 3D free-form micro/nanofabrication. Small 13:1600137CrossRef Je JH, Kim J, Jaworski J (2017) Progression in the fountain pen approach: from 2D writing to 3D free-form micro/nanofabrication. Small 13:1600137CrossRef
Zurück zum Zitat Kaisei K, Satoh N, Kobayshi K, Matsushige K, Yamada H (2011) Nanoscale liquid droplet deposition using ultrasmall aperture on a dynamic mode AFM tip. Nanotechnology 22:175301CrossRef Kaisei K, Satoh N, Kobayshi K, Matsushige K, Yamada H (2011) Nanoscale liquid droplet deposition using ultrasmall aperture on a dynamic mode AFM tip. Nanotechnology 22:175301CrossRef
Zurück zum Zitat Kometani R, Ishihara S (2009) Nanoelectromechanical device fabrications by 3-D nanotechnology using focused-ion beams. Sci Technol Adv Mater 10:034501CrossRef Kometani R, Ishihara S (2009) Nanoelectromechanical device fabrications by 3-D nanotechnology using focused-ion beams. Sci Technol Adv Mater 10:034501CrossRef
Zurück zum Zitat Lessing J, Glavan AC, Walker SB, Keplinger C, Lewis JA, Whitesides GM (2014) Inkjet printing of conductive inks with high lateral resolution on omniphobic “RF paper” for paper-based electronics and MEMS. Adv Mater 26:4677–4682CrossRef Lessing J, Glavan AC, Walker SB, Keplinger C, Lewis JA, Whitesides GM (2014) Inkjet printing of conductive inks with high lateral resolution on omniphobic “RF paper” for paper-based electronics and MEMS. Adv Mater 26:4677–4682CrossRef
Zurück zum Zitat Lin Y, Zhang Y, Yu M (2019) Parallel process 3D metal microprinting. Adv Mater Technol 4:1800393CrossRef Lin Y, Zhang Y, Yu M (2019) Parallel process 3D metal microprinting. Adv Mater Technol 4:1800393CrossRef
Zurück zum Zitat Maruo S, Saeki T (2008) Femtosecond laser direct writing of metallic microstructures by photoreductions of silver nitrate in a polymer matrix. Opt Express 16:1174CrossRef Maruo S, Saeki T (2008) Femtosecond laser direct writing of metallic microstructures by photoreductions of silver nitrate in a polymer matrix. Opt Express 16:1174CrossRef
Zurück zum Zitat Matsui S, Kaito T, Fujita J, Komuro M, Kanda K, Haruyama Y (2000) Three-dimensional nanostructure fabrication by focused-ion-beam chemical vapor deposition. J Vac Technol B 18:3181–3184CrossRef Matsui S, Kaito T, Fujita J, Komuro M, Kanda K, Haruyama Y (2000) Three-dimensional nanostructure fabrication by focused-ion-beam chemical vapor deposition. J Vac Technol B 18:3181–3184CrossRef
Zurück zum Zitat Matsuura T, Takai T, Iwata F (2017) Local electrophoresis deposition assisted by laser trapping coupled with a spatial light modulator for three-dimensional microfabrication. Jpn J Appl Phys 556:105502CrossRef Matsuura T, Takai T, Iwata F (2017) Local electrophoresis deposition assisted by laser trapping coupled with a spatial light modulator for three-dimensional microfabrication. Jpn J Appl Phys 556:105502CrossRef
Zurück zum Zitat McKelvey K, Perry D, Byers JC, Colburn AW, Unwin PR (2014) Bias modulated scanning ion conductance microscopy. Anal Chem 86:3639–3646CrossRef McKelvey K, Perry D, Byers JC, Colburn AW, Unwin PR (2014) Bias modulated scanning ion conductance microscopy. Anal Chem 86:3639–3646CrossRef
Zurück zum Zitat Meister A, Gabl M, Behr P, Studer P, Vörös J, Niedermann P, Bitterli J, Polesel-Maris J, Liley M, Heinzelmann H, Zambelli T (2009) FluidFM: Combining atomic force microscopy and nanofluidics in a universal liquid delivery system for single cell applications and beyond. Nano Lett 9:2507–2591CrossRef Meister A, Gabl M, Behr P, Studer P, Vörös J, Niedermann P, Bitterli J, Polesel-Maris J, Liley M, Heinzelmann H, Zambelli T (2009) FluidFM: Combining atomic force microscopy and nanofluidics in a universal liquid delivery system for single cell applications and beyond. Nano Lett 9:2507–2591CrossRef
Zurück zum Zitat Ming S, Dravid VP (2001) Colored ink dip-pen nanolithography. Appl Phys Lett 80:4434–4436 Ming S, Dravid VP (2001) Colored ink dip-pen nanolithography. Appl Phys Lett 80:4434–4436
Zurück zum Zitat Momotenko D, Page A, Adobes-Vidal M, Unwin PR (2016) Write-read 3D patterning with a dual-channel nanopipette. ACS Nano 10:8871–8878CrossRef Momotenko D, Page A, Adobes-Vidal M, Unwin PR (2016) Write-read 3D patterning with a dual-channel nanopipette. ACS Nano 10:8871–8878CrossRef
Zurück zum Zitat Pique A, Auyeung RCY, Kim H, Metkus KM, Mathews SA (2008) Digital microfabrication by laser decal transfer. J Laser Micro Nanoeng 3:163–169CrossRef Pique A, Auyeung RCY, Kim H, Metkus KM, Mathews SA (2008) Digital microfabrication by laser decal transfer. J Laser Micro Nanoeng 3:163–169CrossRef
Zurück zum Zitat Takai T, Nakao H, Iwata F (2014) Tree-dimensional microfabrication using local electrophoresis deposition and a laser trapping technique. Opt Express 22:28109CrossRef Takai T, Nakao H, Iwata F (2014) Tree-dimensional microfabrication using local electrophoresis deposition and a laser trapping technique. Opt Express 22:28109CrossRef
Zurück zum Zitat Tanaka T, Ishikawa A, Kawata S (2006) Two-photon-induced reduction of metal ions for fabrication three-dimensional electrically conductive metallic microstructure. Appl Phys Lett 88:081107CrossRef Tanaka T, Ishikawa A, Kawata S (2006) Two-photon-induced reduction of metal ions for fabrication three-dimensional electrically conductive metallic microstructure. Appl Phys Lett 88:081107CrossRef
Zurück zum Zitat Yoshioka M, Mizutani Y, Ushiki T, Nakazawa K, Iwata F (2019) Micropillar fabrication based on local electrophoretic deposition using a scanning ion conductance microscope with a theta nanopipette. Jpn J Appl Phys 58:046503CrossRef Yoshioka M, Mizutani Y, Ushiki T, Nakazawa K, Iwata F (2019) Micropillar fabrication based on local electrophoretic deposition using a scanning ion conductance microscope with a theta nanopipette. Jpn J Appl Phys 58:046503CrossRef
Zurück zum Zitat Zenou M, Kotler Z (2016) Printing of metallic 3D micro-objects by laser induced forward transfer. Opt Express 24:1431CrossRef Zenou M, Kotler Z (2016) Printing of metallic 3D micro-objects by laser induced forward transfer. Opt Express 24:1431CrossRef
Zurück zum Zitat Zhang P, Aydemir N, Alkaisi M, Williams DE, Travas-Sejdic J (2018) Direct writing and characterization of three-dimensional conducting polymer PEDOT arrays. ACS Appl Mater Interfaces 10:11888–11895CrossRef Zhang P, Aydemir N, Alkaisi M, Williams DE, Travas-Sejdic J (2018) Direct writing and characterization of three-dimensional conducting polymer PEDOT arrays. ACS Appl Mater Interfaces 10:11888–11895CrossRef
Metadaten
Titel
Local electroplating deposition for free-standing micropillars using a bias-modulated scanning ion conductance microscope
Publikationsdatum
29.10.2019
Erschienen in
Microsystem Technologies / Ausgabe 4/2020
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI
https://doi.org/10.1007/s00542-019-04665-z

Weitere Artikel der Ausgabe 4/2020

Microsystem Technologies 4/2020 Zur Ausgabe

Neuer Inhalt