nach oben

Journal of Materials Engineering and Performance

Erschienen in:

24.02.2017

Low-Cycle Fatigue Behavior and Fracture Mechanism of HS80H Steel at Different Strain Amplitudes and Mean Strains

verfasst von: Wenlan Wei, Lihong Han, Hang Wang, Jianjun Wang, Jianxun Zhang, Yaorong Feng, Tao Tian

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This work studied the low-cycle fatigue (LCF) behavior of HS80H steel at room temperature. LCF tests at strain amplitudes of 0.4, 0.6, 0.8, 1.0, 1.2, 1.6, and 2.0% were conducted under constant mean strain. In addition, tests at mean strains of −0.8, −0.3, 0, 0.5, and 1.2% were conducted under constant strain amplitude. The microstructure and fracture surface of the material after the tests were characterized using scanning electron microscopy and transmission electron microscopy, respectively. Results of LCF test demonstrate the hardening-softening transition of HS80H steel. And it is associated with strain amplitude and mean strain. In addition, LCF life is affected by strain amplitude and mean strain. In asymmetric fatigue, the maximum absolute value of strain and fatigue life displays a linear relationship in double logarithmic coordinates. Microscopic observation showed that fatigue crack propagates through transgranular propagation resulting from the interaction between dislocation pileup and precipitates.

Vorheriger Artikel Electrochemical Behavior of Three 90Cu-10Ni Tubes from Different Manufacturers After Immersion in 3.5% NaCl Solution

Nächster Artikel Microstructure Evolution and Mechanical and Corrosion Behavior of Accumulative Roll Bonded Mg-2%Zn/Al-7075 Multilayered Composite

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

X. Zhu, S. Liu, and H. Tong, Plastic Limit Analysis of Defective Casing for Thermal Recovery Wells, Eng. Fail. Anal., 2013, 27, p 340–349CrossRef

S. Liu, H. Zheng, X. Zhu, and H. Tong, Equations to Calculate Collapse Strength of Defective Casing for Steam Injection Wells, Eng. Fail. Anal., 2014, 42, p 240–251CrossRef

J. Wu and M. Knauss, Casing Temperature and Stress Analysis in Steam-Injection Wells, International Oil & Gas Conference and Exhibition in China, Society of Petroleum Engineers, 2006

Z.-H. Yu, L.-Y. Wang, and D.-W. Liu, Investigation on Production Casing in Steam-Injection Wells and the Application in Oilfield, J. Hydrodyn. Ser. B, 2009, 21(1), p 77–83CrossRef

H. Gu, L. Cheng, S. Huang, B. Bo, Y. Zhou, and Z. Xu, Thermophysical Properties Estimation and Performance Analysis of Superheated-Steam Injection in Horizontal Wells Considering Phase Change, Energy Convers. Manag., 2015, 99, p 119–131CrossRef

X. Yang, Y. Yan, J. Wang, Z. Xu, and X. Yan, Strain Design and Experimental Study of Casing in Thermal Recovery Well Based on the Elastic-Plastic Constitutive Model, Pipelines 2013: Pipelines and Trenchless Construction and Renewals—A Global Perspective, 2013, p 1492–1500

L.J. Han, J.H. Jia, and Z.L. Yan, A Casing Design Method Based on Strain Variations for Wells in Thermal Recovery Processes, J. China Univ. Pet., 2014, 38(3), p 68–72

J. Ahmad, J. Purbolaksono, and L.C. Beng, Thermal Fatigue and Corrosion Fatigue in Heat Recovery Area Wall Side Tubes, Eng. Fail. Anal., 2010, 17(1), p 334–343CrossRef

E. Poursaeidi and H. Bazvandi, Effects of Emergency and Fired Shut Down on Transient Thermal Fatigue Life of a Gas Turbine Casing, Appl. Therm. Eng., 2016, 100, p 453–461CrossRef

10.

I. Nikulin, T. Sawaguchi, A. Kushibe, Y. Inoue, H. Otsuka, and K. Tsuzaki, Effect of Strain Amplitude on the Low-Cycle Fatigue Behavior of a New Fe-15Mn-10Cr-8Ni-4Si Seismic Damping Alloy, Int. J. Fatigue, 2016, 88, p 132–141CrossRef

11.

I. Nikitin and M. Besel, Correlation Between Residual Stress and Plastic Strain Amplitude During Low Cycle Fatigue of Mechanically Surface Treated Austenitic Stainless Steel AISI, 304 and Ferritic–Pearlitic Steel SAE 1045, Mater. Sci. Eng. A, 2008, 491(1-2), p 297–303CrossRef

12.

D.R. Carter, W.E. Caler, D.M. Spengler, and V.H. Frankel, Fatigue Behavior of Adult Cortical Bone: The Influence of Mean Strain and Strain Range, Acta Orthop. Scand., 1981, 52(5), p 481–490CrossRef

13.

S.S. Manson, Interface Between Fatigue, Creep and Fracture, Int. J. Fract., 1966, 2(1), p 327–363CrossRef

14.

S. Sankaran, V.S. Sarma, and K.A. Padmanabhan, Low Cycle Fatigue Behavior of a Multiphase Microalloyed Medium Carbon Steel: Comparison Between Ferrite–Pearlite and Quenched and Tempered Microstructures, Mater. Sci. Eng. A, 2003, 345(1-2), p 328–335CrossRef

15.

M. Sauzay and L.P. Kubin, Scaling Laws for Dislocation Microstructures in Monotonic and Cyclic Deformation of FCC Metals, Prog. Mater. Sci., 2011, 56(6), p 725–784CrossRef

16.

M.F. Giordana, P.F. Giroux, I. Alvarez-Armas, M. Sauzay, A. Armas, and T. Kruml, Microstructure Evolution During Cyclic Tests on EUROFER 97 at Room Temperature. TEM Observation and Modelling, Mater. Sci. Eng. A, 2012, 550, p 103–111CrossRef

17.

M.N. Batista, M.C. Marinelli, S. Hereñú, and I. Alvarez-Armas, The Role of Microstructure in Fatigue Crack Initiation of 9-12%Cr Reduced Activation Ferritic–Martensitic Steel, Int. J. Fatigue, 2015, 72, p 75–79CrossRef

18.

R. Wan, Advanced Well Completion Engineering, 3rd ed., Elsevier Inc, Oxford, UK, 2011, p 221–294

19.

Institution BS, Iso/cd 12106—Metallic Materials—Fatigue Testing Axial Strain—Controlled Method, 2003

20.

Z. Shen, R.H. Wagoner, and W.A.T. Clark, Dislocation Pile-Up and Grain Boundary Interactions in 304 Stainless Steel, Scr. Metall., 1986, 20(6), p 921–926CrossRef

21.

D. Kiener, C. Motz, W. Grosinger, D. Weygand, and R. Pippan, Cyclic Response of Copper Single Crystal Micro-Beams, Scr. Mater., 2010, 63(5), p 500–503CrossRef

22.

A. Niesłony, C.E. Dsoki, H. Kaufmann, and P. Krug, New Method for Evaluation of the Manson–Coffin–Basquin and Ramberg–Osgood Equations with Respect to Compatibility, Int. J. Fatigue, 2008, 30(10-11), p 1967–1977CrossRef

23.

K. Shimada, J. Komotori, and M. Shimizu, The Applicability of the Manson–Coffin Law and Miner’s Law to Extremely Low Cycle Fatigue, Trans. Jpn. Soc. Mech. Eng. Part A, 1987, 53(491), p 1178–1185CrossRef

24.

H. Hao, D. Ye, and C. Chen, Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy, Mater. Sci. Eng. A, 2014, 605, p 151–159CrossRef

25.

X. Wei, S.C. Wong, and S. Bandaru, A Semi-empirical Unified Model of Strain Fatigue Life for Insulation Plastics, J. Mater. Sci., 2010, 45(2), p 326–333CrossRef

26.

L. Lin, X. Li, J. Tan, and J. Zhang, Ultrasonic Power Spectral Analysis for Heat Treatment Transformation Products in GCr15SiMn Steel, Trans. Mater. Heat Treat., 2002, 04, p 21–24+73

27.

J.G. Liu, M.W. Fu, and W.L. Chan, A Constitutive Model for Modeling of the Deformation Behavior in Microforming with a Consideration of Grain Boundary Strengthening, Comput. Mater. Sci., 2012, 55(55), p 85–94CrossRef

28.

L. Wang, Q. Liu, and S. Shen, Effects of Void–Crack Interaction and Void Distribution on Crack Propagation in Single Crystal Silicon, Eng. Fract. Mech., 2015, 146, p 56–66CrossRef

29.

X.L. Xu and R.K.N.D. Rajapakse, Analytical Solution for an Arbitrarily Oriented Void/Crack and Fracture of Piezoceramics, Acta Mater., 1999, 47(47), p 1735–1747CrossRef

30.

S.Y. Liu and I.W. Chen, Fatigue of Yttria-Stabilized Zirconia: II. Crack Propagation, Fatigue Striation, and Short Crack Behavior, J. Am. Ceram. Soc., 1991, 74(6), p 1206–1216CrossRef

Titel: Low-Cycle Fatigue Behavior and Fracture Mechanism of HS80H Steel at Different Strain Amplitudes and Mean Strains
verfasst von: Wenlan Wei
Lihong Han
Hang Wang
Jianjun Wang
Jianxun Zhang
Yaorong Feng
Tao Tian
Publikationsdatum: 24.02.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 4/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2575-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2017

Analysis of Particle Distribution in Milled Al-Based Composites Reinforced by B4C Nanoparticles

Electrochemical Behavior of Three 90Cu-10Ni Tubes from Different Manufacturers After Immersion in 3.5% NaCl Solution

Effects of Zr, Ti, and Al Additions on Nonmetallic Inclusions and Impact Toughness of Cast Low-Alloy Steel

Effect of Niobium on Phase Transformations, Mechanical Properties and Corrosion of Supermartensitic Stainless Steel

Mechanically Assisted Solid-State Mixing and Spark Plasma Sintering for Fabrication of Bulk Nanocomposite (WC/7(10Co/4Cr))-Based ZrO2 Systems

New Correlations Between Monotonic and Cyclic Properties of Metallic Materials

Premium Partner

Marktübersichten