nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

15. Machine Elements

verfasst von : Frank Engelmann, Prof. Dr.-Ing. Karl-Heinrich Grote, Thomas Guthmann

Erschienen in: Springer Handbook of Mechanical Engineering

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Machine elements are components with the same or similar form that are very frequently found in machines, plants, and apparatus. They can be simple elements, such as washers or keys, or more complex components such as shafts, rolling bearings, or gears. The essential functional properties of the elements are mostly defined in corresponding standards. In general, guidelines and calculation regulations are available for the design and dimensioning of machine elements.

The machine elements most frequently used in practice, such as fasteners, connectors, axles/shafts, shaft-hub joints, bearings, seals and gaskets, sprockets, springs, and pipes are introduced and discussed in this chapter. It focuses on choosing suitable elements for a specific problem and proper design/dimensioning of these elements. The chapter is aimed both at engineers in practice and students in training.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Measuring and Quality Control

Nächstes Kapitel Engineering Design

R.C. Hibbeler: Mechanics of Materials, 10th edn. (Prentice Hall, Boston 2016)

H. Wittel, D. Muhs, D. Jannasch, J. Voßiek: Roloff/Matek Maschinenelemente, Normung, Berechnung, Gestaltung – Lehrbuch und Tabellenbuch, 23rd edn. (Springer, Berlin, Heidelberg 2017)

K.-H. Decker: Decker Maschinenelemente: Funktionen, Gestaltung und Berechnung, 19th edn. (Hanser, München 2014)CrossRef

ISO 6336-1: Calculation of load capacity of spur and helical gears – Part 1: Basic principles, introduction and general influence factors (Beuth Berlin 2006)

R. Rennert: Rechnerischer Festigkeitsnachweis für Maschinenbauteile aus Stahl, Eisenguss- und Aluminiumwerkstoffen, FKM-Richtlinie, 6th edn. (VDMA, Frankfurt a. M. 2012)

H. Neubert: Kerbspannungslehre, Theorie der Spannungskonzentration, Genaue Berechnung der Festigkeit, 4th edn. (Springer, Berlin, Heidelberg 2001)

DIN 743-2: Calculation of load capacity of shafts and axles – Part 2: Theoretical stress concentration factors and fatigue notch factors (Beuth, Berlin 2012)

W.D. Pilkey, B.F. Pilkey: Peterson’s Stress Concentration Factors, 3rd edn. (Wiley, Hoboken 2008)

DIN 743-1: Calculation of load capacity of shafts and axles – Part 1: General (Beuth, Berlin 2012)

DIN 743-3: Calculation of load capacity of shafts and axles – Part 3: Strength of materials (Beuth, Berlin 2012)

W.C. Young, R.G. Budynas, A.M. Sadegh: Roark’s Formulas for Stress and Strain, 8th edn. (McGraw-Hill, New York 2012)

L. Issler, H. Ruoß, P. Häfele: Festigkeitslehre – Grundlagen, 2nd edn. (Springer, Berlin, Heidelberg 2006)

Y.-L. Lee, M.E. Barkey, H.-T. Kang: Metal Fatigue Analysis Handbook: Practical Problem-Solving Techniques for Computer-aided Engineering (Elsevier, Amsterdam 2012)

E. Haibach: Betriebsfestigkeit Verfahren und Daten zur Bauteilberechnung, 3rd edn. (Springer, Berlin, Heidelberg 2006)

J.A. Bannantine, J.J. Comer, J.L. Handrock: Fundamentals of Metal Fatigue Analysis (Prentice Hall, Englewood Cliffs 1990)

S.S. Manson, G.R. Halford: Fatigue and Durability of Structural Materials (ASM International, Materials Park 2006)CrossRef

D. Radaj, C.M. Sonsino, W. Fricke: Fatigue Assessment of Welded Joints by Local Approaches, 2nd edn. (Woodhead, Cambridge 2006)CrossRef

ISO 8734 Parallel pins of hardened and martensitic stainless steel (Dowel pins) (Beuth, Berlin 1997)

ISO 2339:1986 Taper pins, unhardened (Beuth, Berlin 1986)

ISO 8739 Grooved pins – Full-length parallel grooved, with pilot (Beuth, Berlin 1997)

ISO 8744 Grooved pins – Full-length taper grooved (Beuth, Berlin 1997)

ISO 8752 Spring-type straight pins – Slotted, heavy duty (Beuth, Berlin 2009)

A. Böge, W. Böge (Eds.): Handbuch Maschinenbau: Grundlagen und Anwendungen der Maschinenbautechnik, 23rd edn. (Springer, Wiesbaden 2017)

G. Niemann, H. Winter, B.-R. Höhn: Maschinenelemente, Band 1: Konstruktion und Berechnung von Verbindungen, Lagern, Wellen, 3rd edn. (Springer, Berlin, Heidelberg 2013)

ISO 2340: Clevis pins without head (Beuth, Berlin 1986)

ISO 2341: Clevis pins with head (Beuth, Berlin 1986)

DIN 8593-5: Fertigungsverfahren Fügen – Teil 5: Fügen durch Umformen; Einordnung, Unterteilung, Begriffe (Beuth, Berlin 2003)

DIN 5417: Securing parts for rolling bearings – Snap rings for bearings with ring groove (Beuth, Berlin 2011)

DIN 471: Retaining rings for shafts – Normal type and heavy type (Beuth, Berlin 2011)

DIN 472: Retaining rings for bores – Normal type and heavy type (Beuth, Berlin 2011)

DIN 988: Shim rings and supporting rings (Beuth, Berlin 1990)

DIN 983: Retaining rings with lugs for shafts (Beuth, Berlin 2011)

DIN 984: Retaining rings with lugs (internal circlips) for use in bores (Beuth, Berlin 2013)

DIN 6799: Retaining washers for shafts (Beuth, Berlin 2011)

DIN 9925: Round wire snap rings for shafts (Beuth, Berlin 2016)

DIN 9926: Round wire snap rings for bores (Beuth, Berlin 2016)

DIN 616: Rolling bearings – Dimensions – General plan (Beuth, Berlin 2000)

ISO 1234: Split pins (Beuth, Berlin 1997)

DIN 11024: Spring Cotters (Beuth, Berlin 1973)

VDI 2230 Part 1: Systematic Calculation of Highly Stressed Bolted Joints—Joints with one Cylindrical Bolt (Beuth, Berlin 2015)

VDI 2230 Part 2: Systematic Calculation of Highly Stressed Bolted Joints—Multi Bolted Joints (Beuth, Berlin 2014)

B. Schlecht: Festigkeit, Wellen, Verbindungen, Federn, Kupplungen, Maschinenelemente, Vol. 1 (Pearson, Boston 2007)

ISO 898-1: Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (Beuth, Berlin 2013)

ISO 68-1: ISO general purpose screw threads – Basic profile – Part 1: Metric screw threads (Beuth, Berlin 1998)

SAE J429: Mechanical and Material Requirements for Externally Threaded Fasteners (SAE, Warrendale 2014)

ASTM A307: Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength, ASTM International: West Conshohocken 2014

EN 923: Adhesives – Terms and definitions (Beuth, Berlin 2016)

M. Spotts, T. Shoup, L. Hornberger: Design of Machine Elements, 8th edn. (Prentice Hall, Englewood Cliffs 2004)

K.-J. Matthes, W. Schneider: Schweißtechnik: Schweißen von metallischen Konstruktionswerkstoffen, 5th edn. (Hanser, München 2012)CrossRef

EN 1993-1-8: Eurocode 3: Design of steel structures – Part 1–8: Design of joints (Beuth, Berlin 2010)

M. Rasche: Handbuch Klebtechnik (Hanser, München 2012)CrossRef

American Welding Society: Standards Comparison, https://app.aws.org/mwf/attachments/56/63556/Standards_Comparison.pdf (2017)

D. Breslavsky: Steel and Cast Iron Standards, http://www.steelnumber.com/en/standard_eu.php, last accessed 11 Nov (2019)

H. Dresig, F. Holzweißig: Maschinendynamik, 12th edn. (Springer, Berlin, Heidelberg 2016)MATHCrossRef

DIN 6885-1: Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern (Beuth, Berlin 1968)

ANSI B17.1: Keys and Keyseats (ANSI, New York 1967)

ISO 6912: Woodruff keys and keyways (Beuth, Berlin 1977)

ANSI B17.2: Woodruff keys and keyseats (ANSI, New York 1967)

DIN 7190-1: Interference fits – Part 1: Calculation and design rules for cylindrical self-locking pressfits (Beuth, Berlin 2017)

DIN 253: Geometrical product specifications (GPS) – Series of conical tapers and taper angles; Values for setting taper angles and setting heights (Beuth, Berlin 2003)

DIN 7190-2: Interference Fits—Part 2: Calculation and Design Rules for Conical Self-locking Pressfits (Beuth, Berlin 2017)

F.G. Kollmann: Welle-Nabe-Verbindungen (Springer, Berlin, Heidelberg 1984)CrossRef

ISO 15: Rolling bearings – Radial bearings – Boundary dimensions, general plan (Beuth, Berlin 2011)

ISO 355: Rolling bearings – Tapered roller bearings – Boundary dimensions and series designations (Beuth, Berlin 2007)

DIN 720: Rolling Bearings – Tapered roller bearings (Beuth, Berlin 2007)

ISO 104: Rolling bearings – Thrust bearings – Boundary dimensions, general plan (Beuth, Berlin 2015)

American Bearing Manufacturers Association: ANSI/ABMA 12.2: Instrument Ball Bearing-Inch Design (ABMA, Washington 2010)

American Bearing Manufacturers Association: ANSI/ABMA 19.2: Taperes Roller Bearings-Radial-Inch Design (ABMA, Washington 2014)

DIN 623-1: Rolling bearings; fundamental principles; designation, marking (Beuth, Berlin 1993)

ISO 76: Rolling bearings – Static load ratings (Beuth, Berlin 2006)

ISO 281: Rolling bearings – Dynamic load ratings and rating life (Beuth, Berlin 2007)

Schaeffler Technologies: Tragfähigkeit und Lebensdauer, http://medias.schaeffler.de/medias/de!hp.tg.cat/tg_hr (2017)

W.J. Barz (Ed.): Schäden an geschmierten Maschinenelementen: Gleitlager, Wälzlager, Zahnräder, 3rd edn. (Expert, Renningen-Malmsheim 1999)

L. Engel, H. Winter: Wälzlagerschäden, Antriebstechnik 18(3), 71–74 (1979)

Schaeffler Technologies AG: Rolling Bearing Damage, Rolling Bearing Damage Recognition of Damage and Bearing Inspection (Schaeffler Technologies, Herzogenaurach 2010)

ISO 15243: Rolling bearings – Damage and failures – Terms, characteristics and causes (Beuth, Berlin 2004)

H. Dahlke: Handbuch Wälzlagertechnik: Bauarten-Gestaltung-Betrieb (Vieweg, Braunschweig 1994)CrossRef

Schaeffler Technologie: Katalog Wälzlager, Kugellager Rollenlager, Nadellager, Laufrollen, Lager für Gewindetriebe, Spannlager, Gehäuseeinheiten Lagergehäuse Zubehör (Schaeffler Technologies, Schweinfurt 2014)

SKF Group: Rolling Bearings (SKF, Göteborg 2016)

Schaeffler Technologies: Rolling Bearing Damage Recognition of Damage and Bearing Inspection (Schaeffler Technologies, Schweinfurt 2010)

ISO 4378-1: Plain bearings – Terms, definitions, classification and symbols – Part 1: Design, bearing materials and their properties (Beuth, Berlin 2009)

B. Sauer (Ed.): Konstruktionselemente des Maschinenbaus, Vol. 2, 8th edn. (Springer, Berlin, Heidelberg 2018)

ISO 4378-3: Plain bearings – Terms, definitions, classification and symbols – Part 3: Lubrication (Beuth, Berlin 2009)

DIN 322: Gleitlager; Lose Schmierringe für allgemeine Anwendung (Beuth, Berlin 1983)

VDI 2204-Blatt 1: Auslegung von Gleitlagerungen; Grundlagen (Beuth, Berlin 1992)

ISO 12128: Plain bearings – Lubrication holes, grooves and pockets – Dimensions, types, designation and their application to bearing bushes (Beuth, Berlin 2001)

W. Bartz (Ed.): Auslegung, Konstruktion, Werkstoffwahl und Schmierung, Gleitlagertechnik, Vol. 1 (Expert, Grafenau 1981)

W. Bartz (Ed.): Auslegung, Konstruktion, Werkstoffwahl und Schmierung, Gleitlagertechnik, Vol. 2 (Expert, Sindelfingen 1986)

VDI 2204 1-4: Design of plain bearings (Beuth, Berlin 1992)

B. Perovic: Hydrostatische Führungen und Lager (Springer, Berlin, Heidelberg 2012)CrossRef

H. Czichos, K.-H. Habig (Eds.): Tribologie-Handbuch – Tribometrie, Tribomaterialien, Tribotechnik, 4th edn. (Springer, Berlin, Heidelberg 2015)

EN 1514-1: Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 1: Non-metallic flat gaskets with or without inserts (Beuth, Berlin 1997)

ISO 3601-1: Fluid power systems – O-rings – Part 1: Inside diameters, cross-sections, tolerances and designation codes (Beuth, Berlin 2012)

ISO 3601-2: Fluid power systems – O-rings – Part 2: Housing dimensions for general applications (Beuth, Berlin 2016)

SAE AS 568D: Aerospace Size Standard for O-rings (SAE, Warrendale 2014)

ISO 6194-1: Rotary shaft lip-type seals incorporating elastomeric sealing elements – Part 1: Nominal dimensions and tolerances (Beuth, Berlin 2007)

Eriks bv: Eriks Oil Seals, http://eriks.nl/documentatie/afdichtingen/asafdichtingen/oilseals.pdf (2017)

EagleBurgmann: SeccoMix 1, https://www.eagleburgmann.com/en/products/mechanical-seals/agitator-seals/dry-running-seals/seccomix-1 (2017)

EagleBurgmann: HSH-D, https://www.eagleburgmann.com/en/products/mechanical-seals/agitator-seals/liquid-lubricated-seals/hsh-d?set_language=en (2017)

EN 12756: Mechanical Seals—Principal Dimensions, Designation and Material Codes (Beuth, Berlin 2000)

H. Müller, B. Nau: Fluid Sealing Technology: Principles and Applications (Marcel Decker, New York, Basel 1998)

W. Tietze, A. Riedl (Eds.): Taschenbuch Dichtungstechnik, 3rd edn. (Vulkan, Essen 2011)

H. Linke (Ed.): Stirnradverzahnung Berechnung-Werkstoffe-Fertigung, 2nd edn. (Hanser, München 2010)

ISO 21771: Gears – Cylindrical involute gears and gear pairs – Concepts and geometry (Beuth, Berlin 2007)

ISO 53: Cylindrical gears for general and heavy engineering – Standard basic rack tooth profile (Beuth, Berlin 1998)

ISO 54: Cylindrical gears for general engineering and for heavy engineering – Modules (Beuth, Berlin 1996)

W. Skolaut (Ed.): Maschinenbau. Ein Lehrbuch für das ganze Bachelor-Studium (Springer, Berlin, Heidelberg 2014)

DIN 3992: Addendum modification of external spur and helical gears (Beuth, Berlin 1964)

ISO 6336-1;2;3;5;6: Calculation of load capacity of spur and helical gears (Beuth, Berlin 2006–2017)

ANSI/AGMA 2001-D04: Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (AGMA, Alexandria 2004)

K.-H. Grote, J. Feldhusen (Eds.): Dubbel, Handbuch Maschinenbau, 21st edn. (Springer, Berlin, Heidelberg 2014)

G. Niemann, H. Winter: Getriebe allgemein, Zahnradgetriebe – Grundlagen, Stirnradgetriebe, Maschinenelemente, Vol. 2, 2nd edn. (Springer, Berlin, Heidelberg 2003)

G. Niemann, H. Winter: Schraubrad-, Kegelrad-, Schnecken-, Ketten-, Riemen-, Reibradgetriebe, Kupplungen, Bremsen, Freiläufe, Maschinenelemente, Vol. 3, 2nd edn. (Springer, Berlin, Heidelberg 1983)CrossRef

DIN 3979: Tooth Damage on Gear Trains; Designation, Characteristics, Causes (Beuth, Berlin 1979)

B. Sauer (Ed.): Konstruktionselemente des Maschinenbaus, Vol. 1, 9th edn. (Springer, Berlin, Heidelberg 2016)

H. Habenhauer, F. Bodenstein: Maschinenelemente: Gestaltung, Berechnung, Anwendung, 17th edn. (Springer, Berlin, Heidelberg 2014)CrossRef

DIN-EN 13906-3: Cylindrical Helical Springs Made From Round Wire and Bar—Calculation and Design—Part 3: Torsion Springs (Beuth, Berlin 2014)

DIN-EN 16984: Disc Springs—Calculation (Beuth, Berlin 2016)

BSI: BS-EN 16983: Disc Springs—Quality Specifications—Dimensions (Beuth, Berlin 2016)

DIN-EN 13906-1: Cylindrical Helical Springs Made from Round Wire and Bar—Calculation and Design—Part 1: Compression Springs (Beuth, Berlin 2013)

DIN-EN 13906-2: Cylindrical Helical Springs Made from Round Wire and Bar—Calculation and Design—Part 2: Extension Springs (Beuth, Berlin 2013)

M. Meissner, H.-J. Schorcht, U. Kletzin: Metallfedern Grundlagen, Werkstoffe, Berechnung, Gestaltung und Rechnereinsatz, 3rd edn. (Springer, Berlin, Heidelberg 2014)

A.A.D. Brown: Mechanical Springs, Engineering Design Guides, Vol. 42 (Oxford Univ. Press, London 1981)

Spring Research Association: Helical springs, Engineering Design Guides, Vol. 8 (Oxford Univ. Press, Oxford 1974)

S. Göbel: Gummifedern. Berechnung und Gestaltung, 3rd edn. (Springer, Berlin, Heidelberg 1967)

DIN 2094: Road vehicles leaf springs – Requirements, testing (Beuth, Berlin 2006)

DIN 2091: Circular section torsion bar springs; Calculation and design Beuth, Berlin 1981)

DIN-EN ISO 6708: Pipework Components—Definition and Selection of DN (Nominal Size) (Beuth, Berlin 1995)

BSI: BS-EN 736-1: Valves—Terminology—Part 1: Definition of Types of Valves (Beuth, Berlin 1995)

I.E. Idelchik: Handbook of Hydraulic Resistance, 4th edn. (Begell House, Redding 2007)

W. Wagner: Strömung und Druckverlust, 7th edn. (Vogel, Würzburg 2012)

A. Schweizer: Zeta Werte, http://www.schweizer-fn.de/zeta/start_zeta.php, last accessed 11 Nov (2019)

DIN 2413: Seamless steel tubes for oil- and water-hydraulic systems – Calculation rules for pipes and elbows for dynamic loads (Beuth, Berlin 2011)

Verband der Technischen Überwachungs-Vereine e. V.: AD-2000-Regelwerk – Taschenbuch 2016, 10th edn. (Beuth, Berlin 2017)

W. Wagner: Rohrleitungstechnik, 11th edn. (Vogel, Würzburg 2012)

G. Wossog (Ed.): Planung – Herstellung – Einrichtung, Handbuch Rohrleitungsbau, Vol. 1, 4th edn. (Vulkan, Essen 2016)

Titel: Machine Elements
verfasst von: Frank Engelmann
Prof. Dr.-Ing. Karl-Heinrich Grote
Thomas Guthmann
Verlag: Springer International Publishing
Buch: Springer Handbook of Mechanical Engineering
Print ISBN: 978-3-030-47034-0

Electronic ISBN: 978-3-030-47035-7

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-47035-7_15

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht