nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

31.05.2021 | ORIGINAL ARTICLE

Machine tool analyzer: a device for identifying 13 position-independent geometric errors for five-axis machine tools

verfasst von: Seung-Han Yang, Kwang-Il Lee

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

We introduce a prototype “machine tool analyzer” (MTA), consisting of a nest of five displacement sensors and a dual-ball system with two centering structures, designed to identify 13 position-independent geometric errors (PIGEs) in five-axis machine tools. The 13 PIGEs include three squareness errors in the three linear axes, two squareness errors and two offset errors in the rotary/tilting axis, and two squareness errors in the spindle axis. The MTA completes four circular paths, during which an identification algorithm identifies thirteen possible PIGEs and set-up errors. The MTA was applied to a commercial five-axis machine tool with a swivel head/rotary table and verified experimentally. Cost-effective measurements were achieved using a single set-up of the nest and associated system. In addition, a circular test using a double ball-bar was used to test the volumetric accuracy of the five-axis machine tool and verify the identified PIGEs. The maximum deviation, minimum deviation, and PV values in the circular test were 109, 55, and 55 μm, respectively, without compensation for errors imparted by the PIGEs, and 38, 5, and 33 μm, respectively, with compensation. This demonstrated the validity of the proposed method.

Vorheriger Artikel Selection of parameters in nanosecond pulsed wave laser micro-welding

Nächster Artikel A novel investigation into the edge effect reduction of 4340 steel disc through induction hardening process using magnetic flux concentrators

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Smith GT (2016) Laser instrumentation and calibration. In: Machine tool metrology. Springer, Cham. https://doi.org/10.1007/978-3-319-25109-7_2CrossRef

Olvera D, López de Lacalle LN, Compeán FI, Fz-Valdivielso A, Lamikiz A, Campa FJ (2012) Analysis of the tool tip radial stiffness of turn–milling centers. Int J Adv Manuf Technol 60:883–891. https://doi.org/10.1007/s00170-011-3645-3CrossRef

Barakat NA, Elbestawi MA, Spence AD (2000) Kinematic and geometric error compensation of a coordinate measuring machine. Int J Mach Tools Manuf 40:833–850. https://doi.org/10.1016/S0890-6955(99)00098-XCrossRef

Fan J, Tao H, Pan R, Chen D (2020) Optimal tolerance allocation for five-axis machine tools in consideration of deformation caused by gravity. Int J Adv Manuf Technol 111:13–24. https://doi.org/10.1007/s00170-020-06096-xCrossRef

Gomez-Acedo E, Olarra A, Orive J, Lopez de la Calle LN (2013) Methodology for the design of a thermal distortion compensation for large machine tools based in state-space representation with Kalman filter. Int J Mach Tools Manuf 75:100–108. https://doi.org/10.1016/j.ijmachtools.2013.09.005CrossRef

Yang B, Liu Z (2020) Thermal error modeling by integrating GWO and ANFIS algorithms for the gear hobbing machine. Int J Adv Manuf Technol 109:2441–2456. https://doi.org/10.1007/s00170-020-05791-zCrossRef

Lee KI, Yang SH (2013) Measurement and verification of position–independent geometric errors of a five–axis machine tool using a double ball–bar. Int J Mach Tools Manuf 70:45–52. https://doi.org/10.1016/j.ijmachtools.2013.03.010CrossRef

ISO 230–1 (2012) Test code for machine tools – part 1: geometric accuracy of machines operating under no–load or quasi–static conditions. ISO

Uddin MS, Ibaraki S, Matsubara A, Matsushita T (2009) Prediction and compensation of machining geometric errors of five–axis machining centers with kinematic errors. Precis Eng 33:194–201. https://doi.org/10.1016/j.precisioneng.2008.06.001CrossRef

10.

ISO 230–7 (2015) Test code for machine tools – part 7: geometric accuracy of axes of rotation. ISO

11.

ISO 10791–2 (2001) Test conditions for machining centres part 2: geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis. ISO

12.

Bringmann B, Knapp W (2006) Model–based ‘Chase–the–ball’ calibration of a 5–axes machining center. CIRP Ann 55:531–534. https://doi.org/10.1016/S0007-8506(07)60475-2CrossRef

13.

Givi M, Mayer JRR (2014) Volumetric error formulation and mismatch test for five–axis CNC machine compensation using differential kinematics and ephemeral G–code. Int J Adv Manuf Technol 77:1645–1653. https://doi.org/10.1007/s00170-014-6558-0CrossRef

14.

Smith GT (2016) Measurement and machine tools–an introduction. In: Machine Tool Metrology. Springer, Cham. https://doi.org/10.1007/978-3-319-25109-7_1

15.

Schwenke H, Knapp W, Haitjema H, Weckenmann A, Schmitt R, Delbressine F (2008) Geometric error measurement and compensation of machines–an update. CIRP Ann 57:660–675. https://doi.org/10.1016/j.cirp.2008.09.008CrossRef

16.

Ibaraki S, Knapp W (2012) Indirect measurement of volumetric accuracy for three–axis and five–axis machine tools: a review. Int J Autom Technol 6:110–124. https://doi.org/10.20965/ijat.2012.p0110CrossRef

17.

Iñigo B, Ibabe A, Aguirre G, Urreta H, López de Lacalle LN (2019) Analysis of laser tracker–based volumetric error mapping strategies for large machine tools. Metals 9:757. https://doi.org/10.3390/met9070757CrossRef

18.

ISO/TR 230–11 (2018) Test code for machine tools – part 11: measuring instruments suitable for machine tool geometry tests. ISO

19.

Lee KI, Lee JC, Yang SH (2013) The optimal design of a measurement system to measure the geometric errors of linear axes. Int J Adv Manuf Technol 66:141–149. https://doi.org/10.1007/s00170-012-4312-zCrossRef

20.

Lee HH, Lee DM, Yang SH (2014) A technique for accuracy improvement of squareness estimation using a double ball-bar. Meas Sci Technol 25:094009. https://doi.org/10.1088/0957-0233/25/9/094009CrossRef

21.

ISO 230–4 (2005) Test code for machine tools – part 4: circular tests for numerically controlled machine tools. ISO

22.

ISO 10791–6 (2014) Test conditions for machining centres – part 6: accuracy of speeds and interpolations. ISO

23.

Tsutsumi M, Saito A (2003) Identification and compensation of systematic deviations particular to 5–axis machining centers. Int J Mach Tools Manuf 43:771–780. https://doi.org/10.1016/S0890-6955(03)00053-1CrossRef

24.

Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five–axis machine tools by on–the–machine measurement using a touch–trigger probe. Int J Mach Tools Manuf 58:44–53. https://doi.org/10.1016/j.ijmachtools.2012.03.002CrossRef

25.

Weikert S (2004) R–test, a new device for accuracy measurements on five axis machine tools. CIRP Ann 53:429–432. https://doi.org/10.1016/S0007-8506(07)60732-XCrossRef

26.

Tsutsumi M, Tone S, Kato N, Sato R (2013) Enhancement of geometric accuracy of five–axis machining centers based on identification and compensation of geometric deviations. Int J Mach Tools Manuf 68:11–20. https://doi.org/10.1016/j.ijmachtools.2012.12.008CrossRef

27.

Matsushita T (2011) Method and program for identifying errors, United States Patent Application Publication. US 2011/0040523 A1

28.

Yang SH, Lee KI (2021) Identification of 11 position–independent geometric errors of a five–axis machine tool using 3D geometric sensitivity analysis. Int J Adv Manuf Technol 113:3271–3282. https://doi.org/10.1007/s00170-021-06844-7CrossRef

29.

Mayer JRR (2012) Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact. CIRP Ann 61:515–518. https://doi.org/10.1016/j.cirp.2012.03.022CrossRef

30.

Ibaraki S, Sawada M, Matsubara A, Matsushita T (2010) Machining tests to identify kinematic errors on five–axis machine tools. Precis Eng 34:387–398. https://doi.org/10.1016/j.precisioneng.2009.09.007CrossRef

31.

Lee KI, Shin DH, Yang SH (2017) Parallelism error measurement for the spindle axis of machine tools by two circular tests with different tool lengths. Int J Adv Manuf Technol 88:2883–2887. https://doi.org/10.1007/s00170-016-8999-0CrossRef

32.

Yao Y, Nishizawa K, Kato N, Tsutsumi M, Nakamoto K (2020) Identification method of geometric deviations for multi–tasking machine tools considering the squareness of translational axes. Appl Sci 10:1811. https://doi.org/10.3390/app10051811CrossRef

33.

Díaz-Tena E, Ugalde U, López de Lacalle LN, de la Iglesia A, Calleja A, Campa FJ (2013) Propagation of assembly errors in multitasking machines by the homogenous matrix method. Int J Adv Manuf Technol 68:149–164. https://doi.org/10.1007/s00170-012-4715-xCrossRef

34.

Okafor AC, Ertekin YM (2000) Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematic. Int J Mach Tools Manuf 40:1199–1213. https://doi.org/10.1016/S0890-6955(99)00105-4CrossRef

35.

Lamikiz A, López de Lacalle LN, Ocerin O, Díez D, Maidagan E (2007) The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five–axis milling centres. Int J Adv Manuf Technol 37:122–139. https://doi.org/10.1007/s00170-007-0956-5CrossRef

36.

Tsai CY, Lin PD (2009) The mathematical models of the basic entities of multi-axis serial orthogonal machine tools using a modified Denavit–Hartenberg notation. Int J Adv Manuf Technol 42:1016–1024. https://doi.org/10.1007/s00170-008-1654-7CrossRef

37.

Chen J, Lin S, He B (2014) Geometric error measurement and identification for rotary table of multi–axis machine tool using double ballbar. Int J Mach Tools Manuf 77:47–55. https://doi.org/10.1016/j.ijmachtools.2013.10.004CrossRef

38.

Jiang X, Cripps RJ (2015) A method of testing position independent geometric errors in rotary axes of a five–axis machine tool using a double ball bar. Int J Mach Tools Manuf 89:151–158. https://doi.org/10.1016/j.ijmachtools.2014.10.010CrossRef

39.

Lee KI, Lee JC, Yang SH (2018) Optimal on–machine measurement of position–independent geometric errors for rotary axes in five–axis machines with a universal head. Int J Precis Eng Manuf 19:545–551. https://doi.org/10.1007/s12541-018-0066-3CrossRef

40.

ISO/TR 16907 (2015) Machine tools – numerical compensation of geometric errors. ISO

41.

Lee KI, Yang SH (2013) Robust measurement method and uncertainty analysis for position-independent geometric errors of a rotary axis using a double ball-bar. Int J Precis Eng Manuf 14:231–239. https://doi.org/10.1007/s12541-013-0032-zCrossRef

42.

Marsh ER (2010) Precision spindle metrology, 2nd edn. DEStech Publications, Pennsylvania

43.

Lee DM, Yang SH (2010) Mathematical approach and general formulation for error synthesis modeling of multi-axis system. Int J Mod Phys B 24:2737–2742. https://doi.org/10.1142/S0217979210065556CrossRefMATH

44.

ISO/IEC Guide 98–3 (2008) Uncertainty of measurement – part 3: guide to the expression of uncertainty in measurement (GUM:1995). ISO

45.

ISO 230–9 (2005) Test code for machine tools – part 9: estimation of measurement uncertainty for machine tool tests according to series ISO 230, Basic Equations. ISO

46.

Uriarte L, Herrero A, Zatarain M, Santiso G, Lopéz de Lacalle LN, Lamikiz A, Albizuri J (2007) Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter. Precis Eng 31:1–12. https://doi.org/10.1016/j.precisioneng.2005.11.010CrossRef

47.

Trapet E, Martin JJ, Yague JA, Spaan H, Zelený V (2006) Self–centering probes with parallel kinematics to verify machine–tools. Precis Eng 30:165–179. https://doi.org/10.1016/j.precisioneng.2005.07.002CrossRef

48.

Kenno T, Sato R, Shirase K, Natsume S, Spaan HAM (2020) Influence of linear–axis error motions on simultaneous three–axis controlled motion accuracy defined in ISO 10791–6. Precis Eng 61:110–119. https://doi.org/10.1016/j.precisioneng.2019.10.011CrossRef

49.

Lee KI, Yang SH (2013) Accuracy evaluation of machine tools by modeling spherical deviation based on double ball-bar measurement. Int J Mach Tools Manuf 75:46–54. https://doi.org/10.1016/j.ijmachtools.2013.09.001CrossRef

50.

Lee KI, Yang SH (2014) Circular tests for accurate performance evaluation of machine tools via an analysis of eccentricity. Int J Precis Eng Manuf 15:2499–2506. https://doi.org/10.1007/s12541-014-0620-6CrossRef

Titel: Machine tool analyzer: a device for identifying 13 position-independent geometric errors for five-axis machine tools
verfasst von: Seung-Han Yang
Kwang-Il Lee
Publikationsdatum: 31.05.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9-10/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07341-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2021

Retraction Note: Research on tool change time and the dynamic reliability of the machining process based on sensitivity analysis

Effects of sandwich core structure and infill rate on mechanical properties of 3D-printed wood/PLA composites

Liquid filling and external extrusion composite forming tiny size spiral tube with equal wall thickness

Experimental study on near-polished ultra-precision grinding of fused glass with the assistant of pure CeO2 atomizing liquid

An analytical prediction model of surface topography generated in 4-axis milling process

Unified plastic limit analysis of the cap bottom generated by a dedicated cutting tool in orbital drilling

Premium Partner

Marktübersichten