nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Manufacturing of Nanoalumina by Recycling of Aluminium Cans Waste

verfasst von : Aiman Awadh Bin Mokaizh, Jun Haslinda Binti Haji Shariffuddin

Erschienen in: Waste Recycling Technologies for Nanomaterials Manufacturing

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aluminium drink cans, which are usually disposed of after use, led to sizable land pollution and environmental problems. The main target of this work is to utilize aluminium waste cans to produce nano-alumina that considered a significant oxide that has wide technological-and industrial-applications. The objectives of this study are to synthesize and characterize nano aluminium oxide (alumina) that produced from aluminium waste cans as well as to evaluate the synthesized alumina in the treatment of palm oil mill effluent (POME). In this study, the aluminium waste cans will be transformed into nano and micro-sized alumina by using the sol–gel method. The effect of ageing time and ageing temperature in synthesizing nano Al₂O₃ has been studied. The properties of the synthesized alumina were characterized via FTIR, XRD, SEM, EDX, and BET. The produced alumina was used as an adsorbent in the treatment of POME through adsorption. The experimental outcomes divulged that the powder of the produced alumina at room-temperature has aloft surface areas that being an appropriate property to be applied as an adsorbent in the treatment of POME. AL-6 h-30 °C gave the highest percentage of 29% in COD removal for POME. In short, the utilization of aluminium waste cans to produce nano Al₂O₃ is feasible. This economic and environmental-friendly route turned waste into valuable adsorbent that can be used extensively in the treatment of the POME.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Reinforcement of Petroleum Wax By-Product Paraffins as Phase Change Materials for Thermal Energy Storage by Recycled Nanomaterials

Manaf LA, Samah MAA, Zukki NIM (2009) Municipal solid waste management in Malaysia: practices and challenges. Waste Manage 29:2902–2906CrossRef

Aboelazm EAA, Ali GAM, Algarni H, Yin H, Zhong YL, Chong KF (2018) Magnetic electrodeposition of the hierarchical cobalt oxide nanostructure from spent lithium-ion batteries: its application as a supercapacitor electrode. J Phys Chem C 122(23):12200–12206CrossRef

Zainu ZA, Songip AR (2017) Policies, challenges and strategies for municipal waste management in Malaysia. J Sci Technol Innov Policy 3(1):18–22

Kumar S, Kumar R, Bandopadhyay A (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resour Conserv Recycl 48:301–314CrossRef

Shinzato MC, Hypolito R (2005) Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents. Waste Manag 25(1):37–46CrossRef

Ali GAM, Yusoff MM, Shaaban ER, Chong KF (2017) High performance MnO₂ nanoflower supercapacitor electrode by electrochemical recycling of spent batteries. Ceram Int 43:8440–8448CrossRef

Edwards C (2017) The disadvantages of aluminum can, 18 July 2017. Retrieved from https://www.livestrong.com/article/259503-the-disadvantages-of-aluminumcans/

Liu W, Niu T, Yang J, Wang Y, Hu S, Dong Y, Xu H (2011) Preparation of micron-sized alumina powders from aluminium beverage can by means of sol–gel process. Micro Nano Lett 6:852–854CrossRef

Verran G, Kurzawa U (2008) An experimental study of aluminum can recycling using fusion in induction furnace. Resour Conserv Recycl 52:731–736CrossRef

10.

Sheel TK, Poddar P, Murad AW, Neger AT, Chowdhury AS (2016) Preparation of aluminum oxide from industrial waste can available in Bangladesh environment: SEM and EDX analysis. J Adv Chem Eng 06(02)

11.

Adans YF, Martins AR, Coelho RE, Das Virgens CF, Ballarini AD, Carvalho LS (2016) A simple way to produce γ-alumina from aluminum cans by precipitation reactions. Mater Res 19:977–982CrossRef

12.

Ahmedzeki NS, Hussein S, Abdulnabi WA (2017) Recycling waste cans to nano gamma alumina effect of the calcination temperature and pH. Int J Curr Eng Technol 7(1):81–88

13.

Asencios YJ, Sun-Kou MR (2012) Synthesis of high-surface-area γ-Al₂O₃ from aluminum scrap and its use for the adsorption of metals: Pb (II), Cd (II) and Zn (II). Appl Surf Sci 258:10002–10011CrossRef

14.

Abdelkader A, Osman AI, Halawy SA, Mohamed MA (2018) Preparation and characterization of mesoporous γ-Al₂O₃ recovered from aluminum cans waste and its use in the dehydration of ethanol to dimethyl ether. J Mater Cycles Waste Manage 20(3):1428–1436CrossRef

15.

Matori KA, Wah LC, Hashim M, Ismail I, Zaid MHM (2012) Phase transformations of α-alumina made from waste aluminum via a precipitation technique. Int J Mol Sci 13:16812–16821CrossRef

16.

Aswad MA (2012) Residual stress and fracture in high temperature ceramics. Retrieved from https://www.escholar.manchester.ac.uk/jrul/item/?pid=ukac-manscw:157835

17.

Harabi E, Harabi A, Mezahi FZ, Zouai S, Karboua NE, Chehlatt S (2016) Effect of P₂O₅ on mechanical properties of porous natural hydroxyapatite derived from cortical bovine bones sintered at 1,050 °C. Desalin Water Treat 57(12):5297–5302CrossRef

18.

Zhu B, Myat DT, Shin J-W, Na Y-H, Moon I-S, Connor G, Duke M (2015) Application of robust MFI-type zeolite membrane for desalination of saline wastewater. J Membr Sci 475:167–174CrossRef

19.

Hosseini SY, Khosravi-Nikou MR (2016) Synthesis and characterization of nano-sized γ-Al₂O₃ for investigation the effect of temperature on catalytic dehydration of methanol to dimethyl ether. Energy Sources Part A Recov Utiliz Environ Eff 38(7):914–920CrossRef

20.

Adans YF, Martins AR, Coelho RE, Virgens CFD, Ballarini AD, Carvalho LS (2016b) A simple way to produce γ-alumina from aluminum cans by precipitation reactions. Mater Res 19, 977–982

21.

Eriksson O, Reich MC, Frostell B, Björklund A, Assefa G, Sundqvist J-O, Granath J, Baky A, Thyselius L (2005) Municipal solid waste management from a systems perspective. J Clean Product 13:241–252CrossRef

22.

Wu TY, Mohammad AW, Jahim JM, Anuar N (2009) A holistic approach to managing palm oil mill effluent (POME): biotechnological advances in the sustainable reuse of POME. Biotechnol Adv 27:40–52CrossRef

23.

Bin Mokaizh AA, Wirman N, Shariffuddin JH (2019) Synthesis of alumina from aluminium can waste to be applied as catalyst support for biodiesel production. IOP Conf Ser Mater Sci Eng 702:012038CrossRef

24.

Mohammed RR, Ketabchi MR, McKay G (2014) Combined magnetic field and adsorption process for treatment of biologically treated palm oil mill effluent (POME). Chem Eng J 243:31–42CrossRef

25.

Ding GT, Yaakob Z, Takriff MS, Salihon J, Rahaman MSA (2016) Biomass production and nutrients removal by a newly-isolated microalgal strain Chlamydomonas sp in palm oil mill effluent (POME). Int J Hydrogen Energy 41:4888–4895CrossRef

26.

Bazyari A, Mortazavi Y, Khodadadi AA, Thompson LT, Tafreshi R, Zaker A, Ajenifujah OT (2016) Effects of alumina phases as nickel supports on deep reactive adsorption of (4, 6-dimethyl) dibenzothiophene: comparison between γ, δ, and θ-alumina. Appl Catal B 180:312–323CrossRef

27.

Djebaili K, Mekhalif Z, Boumaza A, Djelloul A (2015) XPS, FTIR, EDX, and XRD analysis of Al₂O₃ scales grown on PM2000 alloy. J Spectro 2015

28.

Jafar Tafreshi M, Masoomi Khanghah Z (2015) Infrared spectroscopy studies on sol–gel prepared alumina powders. Mater Sci 21:28–31

29.

Xu N, Liu Z, Bian S, Dong Y, Li W (2016) Template-free synthesis of mesoporous γ-alumina with tunable structural properties. Ceram Int 42:4072–4079CrossRef

30.

Chotisuwan S, Sirirak A, Har-Wae P, Wittayakun J (2012) Mesoporous alumina prepared from waste aluminum cans and used as catalytic support for toluene oxidation. Mater Lett 70:125–127CrossRef

31.

Patterson AL (1939) The Scherrer formula for X-ray particle size determination. Phys Rev 56:978CrossRef

32.

Fouad OA, Makhlouf SA, Ali GAM, El-Sayed AY (2011) Cobalt/silica nanocomposite via thermal calcination-reduction of gel precursors. Mater Chem Phys 128(1–2):70–76CrossRef

33.

Wang X, Shi F, Huang W, Fan C (2012) Synthesis of high quality TiO₂ membranes on alumina supports and their photocatalytic activity. Thin Solid Films 520(7):2488–2492CrossRef

34.

Karim M, Rahman M, Miah M, Ahmad H, Yanagisawa M, Ito M (2011) Synthesis of γ-alumina particles and surface characterization. Open Coll Sci J 4:32–36CrossRef

35.

Ji Y, Zhang F, Yu F, Zhang J, Zhang J (2018) Methyl chloride synthesis over metal chlorides-modified mesoporous alumina catalyst. Catalysts 8(3):99CrossRef

36.

Wu Y, Ma J, Hu F, Li M (2012) Synthesis and characterization of mesoporous alumina via a reverse precipitation method. J Mater Sci Technol 28:572–576CrossRef

37.

Bawa S, Ahmed A, Okonkwo P (2016) The study of thermal effect on the surface properties of gamma-alumina synthesied from kankara kaolin. Niger J Technol 35:66–70CrossRef

38.

Samain L, Jaworski A, Edén M, Ladd DM, Seo D-K, Garcia-Garcia FJ, Häussermann U (2014) Structural analysis of highly porous γ-Al₂O₃. J Solid State Chem 217:1–8CrossRef

39.

Mohammed RR, Chong MF (2014) Treatment and decolorization of biologically treated palm oil mill effluent (POME) using banana peel as novel biosorbent. J Environ Manage 132:237–249CrossRef

40.

Kutty S, Ngatenah S, Johan N, Amat K (2011) Removal of Zn (II), Cu (II), chemical oxygen demand (COD) and colour from anaerobically treated palm oil mill effluent (POME) using microwave incinerated rice husk ash (MIRHA). In: International conference on environmental and industrial innovation IPCBEE, vol 12, pp 90–94

Titel: Manufacturing of Nanoalumina by Recycling of Aluminium Cans Waste
verfasst von: Aiman Awadh Bin Mokaizh
Jun Haslinda Binti Haji Shariffuddin
Verlag: Springer International Publishing
Buch: Waste Recycling Technologies for Nanomaterials Manufacturing
Print ISBN: 978-3-030-68030-5

Electronic ISBN: 978-3-030-68031-2

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-68031-2_30

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht