nach oben

Erschienen in:

2011 | OriginalPaper | Buchkapitel

48. Marine Industry

verfasst von : Peter Davies

Erschienen in: Handbook of Adhesion Technology

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter describes the use of adhesive bonding to assemble structures in the marine industry. The marine environment is extremely aggressive, and this has resulted in widespread use of fiber reinforced composite materials. Adhesive bonding is a lightweight and corrosion resistant means of joining these materials. The main emphasis of this chapter will, therefore, be on the assembly of composites, though some examples of metal bonding will also be discussed. Three industrial applications are used to illustrate the use of adhesive bonding; small pleasure boats, high performance racing yachts, and bonded structures in the offshore industry. Each has specific design requirements, and there is no single marine adhesive suitable for all structures, but the requirement for long-term durability in a seawater environment is common to all these applications.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Railway Industry

Nächstes Kapitel Civil Construction

Adams RD (ed) (2005) Adhesive bonding: science, technology and applications. Woodhead, Cambridge

Adams RD, Cowap JW, Farquharson G, Margary GM, Vaughn D (2009) The relative merits of the Boeing wedge test and the double cantilever beam test for assessing the durability of adhesively bonded joints, with particular reference to the use of fracture mechanics. Int J Adhes Adhes 29(6):609–620CrossRef

Alexander C, Ochoa OO (2010) Extending onshore pipeline repair to offshore steel risers with carbon–fiber reinforced composites. Compos Struct 92(2):499–507CrossRef

Armstrong KB (1997) Long-term durability in water of aluminium alloy adhesive joints bonded with epoxy adhesives. Int J Adhes Adhes 17(2):89–105CrossRef

Bauer P, Roy A, Casari P, Choqueuse D, Davies P (2004) Structural mechanical testing of a full-size adhesively bonded motorboat. J Eng Marine Environ 218(M4):259–266

Biddick K (2005) Structural repairs, Professional Boatbuilder, pp 174–191

Bordes M, Davies P, Cognard J-Y, Sohier L, Sauvant-Moynot V, Galy J (2009) Prediction of long term strength of adhesively bonded steel/epoxy joints in sea water. Int J Adhes Adhes 29(6):595–608CrossRef

Bordes M (2009) PhD thesis, Aging of adhesive joints in a marine environment for offshore applications, INSA Lyon (in French)

Bowditch MR (1996) The durability of adhesive joints in the presence of water. Int J Adhes Adhes 16:73–79MathSciNetCrossRef

Bowditch MR, Harper TI, Lane JA (2004) Feasibility study to compare steel and adhesive/composite-based emergency repair methods for damaged hulls, HSE report 293

Boyd SW, Blake JIR, Shenoi RA, Kapadia A (2004) Integrity of hybrid steel-to-composite joints for marine applications. J Eng Marine Environ 218(M4):235–246

Cao J, Grenestedt JL (2004) Design and testing of joints for composite sandwich/steel hybrid ship hulls, Compos Part A. Appl Sci Manuf 35:1091–1105CrossRef

Cognard JY, Davies P, Gineste B, Sohier L (2005) Development of an improved adhesive test method for composite assembly design. Compos Sci Technol 65:359–368CrossRef

Cowling MJ (1997) A review of adhesive bonding for offshore structures, HSE report, OTO 96 030

Critchlow GW, Yendall KA, Bahrani D, Quinn A, Andrews F (2006) Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys. Int J Adhes Adhes 26:419–453CrossRef

Crocombe AD (1997) Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures. Int J Adhes Adhes 17:229–238CrossRef

Davies P, Choqueuse D, Bigourdan B, Gauthier C, Joannic R, Parneix P, L’Hostis J (2004) Design, manufacture and testing of stiffened panels for marine structures using adhesively bonded pultruded sections. J Eng Marine Environ 218(M4):227–234

Davies P, Sohier L, Cognard JY, Bourmaud A, Choqueuse D, Rinnert E, Créac’hcadec R (2009) Influence of adhesive bond line thickness on joint strength. Int J Adhes Adhes 29:724–736CrossRef

Davies P, Choqueuse D, Bourbouze G (2010) Micro-tomography to study high performance sandwich structures. J Sandwich Struct Mater. doi:10.1177/1099636209344273

Davies P, Baley C, Loaec H, Grohens Y (2005) Interlaminar tests for marine applications. Evaluation of the influence of peel plies and fabrication delays. Appl Compos Materials 12(5):293–307CrossRef

Diez de Ulzurrun I, López F, Herreros MA, Suárez JC (2007) Tests of deck-to-hull adhesive joints in GFRP boats. Eng Fail Anal 14(2):310–320CrossRef

DNV (Det Norske Veritas) Standard for Certification, No. 2.9, Type Approval Programme No. 1-501.12, Adhesives, October 2009

DNV Guidelines for classification of high speed, light craft and naval surface craft, 1991

Germanischer Lloyd (2006) Rules and Guidelines, Materials and Welding, Part 2 Non-metallic materials, Section 3, Repair of Components, Part 2

Hansen AB, Rydin C (2002) Development and qualification of novel thermal insulation systems for deepwater flow lines and risers based on polypropylene, OTC 12141, Houston

Hart-Smith LJ (2002) Adhesive bonding of composite structures – progress to date and some remaining challenges. J Comp Tech Res 24(3):133–153CrossRef

Hashim SA (1999) Adhesive bonding of thick steel adherends for marine structures. Mar struct 12(6):405–423CrossRef

ISO 12215-6 (2008) International Standards Organisation. Part 6 Small Craft-Hull construction and Scantlings – Structural arrangements and details

Jarry E, Shenoi RA (2006) Performance of butt strap joints for marine applications. Int J Adhes Adhes 26:162–176CrossRef

Junhou P, Shenoi RA (1996) Examination of key aspects defining the performance characteristics of out-of-plane joints in FRP marine structures. Compos A Appl Sci Manuf 27(2):89–103CrossRef

Kinloch AJ (1983) Durability of structural adhesives. Applied Science, London

Kinloch AJ (1987) Adhesion and adhesives: science and technology. Chapman and Hall, LondonCrossRef

Knox EM, Cowling MJ, Hashim SA (2000) Fatigue performance of adhesively bonded connections in GRE pipes. Int J Fatigue 22(6):513–519CrossRef

LeLan JY, Parneix P, Gueguen PL (1992) Composite material superstructures. In: Proceedings of the third Ifremer Conference on Nautical Construction with Composites, IFREMER publication 15, pp 399–411

Loh WK, Crocombe AD, Abdel Wahab MM, Ashcroft IA (2002) Environmental degradation of the interfacial fracture energy in an adhesively bonded joint. Eng Fract Mech 69:2113–2128CrossRef

McGeorge D, Weitzenbock J (2004) Adhesive bonding. Special edition of J Eng Marine Environ 218:M4

Mouritz AP, Gellert E, Burchill P, Challis K (2001) Review of advanced composite structures for naval ships and submarines. Compos Struct 53(1):21–41CrossRef

Okada R, Kortschot MT (2002) The role of the resin fillet in the delamination of honeycomb sandwich structures. Compos Sci Technol 62(14):1811–1819CrossRef

Pattee FM, Kopp F (2000) Impact of electrically heated systems on the operation of deepwater subsea oil flow lines. OTC 11894, Houston

Pfund B (2007) Which ply first? Professional Boatbuilder, Vol. 107, June/July 2007, pp 70–81

Popineau S, Shanahan MER (2006) Simple model to estimate adhesion of structural bonding during humid ageing. Int J Adhes Adhes 26(5):363–370CrossRef

Sargent JP (2005) Durability studies for aerospace applications using peel and wedge tests. Int J Adhes Adhes 25(3):247–256MathSciNetCrossRef

Sika Marine Application Guide, 3rd edn. (2009) http://www.sikaconstruction.com/ipd-mag-0.0.pdf. Access December 2009

Speth DR, Yang YP, Ritter GW (2010) Qualification of adhesives for marine composite-to-steel applications. Int J Adhes Adhes 30(2):55–62CrossRef

Tamblin JS, Yang C, Harter P (2001) Investigation of thick bond line adhesive joints. DOT/FAA/AR-01/33

Turton TJ, Dalzel-Job J, Livingstone F (2005) Oil platforms, destroyers and frigates – case studies of QinetiQ’s marine composite patch repairs. Compos A 36:1066–1072CrossRef

UKOOA Specifications and Recommendations for the use of GRP piping offshore. Part 4, Fabrication and installation (1994)

Ural A, Zehnder AT, Ingraffea AR (2003) Fracture mechanics approach to face sheet delamination in honeycomb: measurement of energy release rate of the adhesive bond. Eng Fract Mech 70(1):93–103CrossRef

Xiao GZ, Shanahan MER (1997) Water absorption and desorption in an epoxy resin with degradation. J Polym Sci B 35:2659CrossRef

Titel: Marine Industry
verfasst von: Peter Davies
Verlag: Springer Berlin Heidelberg
Buch: Handbook of Adhesion Technology
Print ISBN: 978-3-642-01168-9

Electronic ISBN: 978-3-642-01169-6

Copyright-Jahr: 2011
DOI: https://doi.org/10.1007/978-3-642-01169-6_48

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht