Skip to main content



Meccanica 1/2021

Ausgabe 1/2021

Inhaltsverzeichnis ( 19 Artikel )

27.01.2021 | Ausgabe 1/2021

Acknowledgement to Reviewers 2020

24.10.2020 | Ausgabe 1/2021

Surface temperature effects of solar panels of fixed-wing drones on drag reduction and energy consumption

M. Hassanalian, S. Mohammadi, G. Acosta, N. Guido, S. Bakhtiyarov

27.10.2020 | Ausgabe 1/2021

Nonlinear vibration absorbers applied on footbridges

Hamed Saber, Farhad S. Samani, Francesco Pellicano

04.01.2021 | Ausgabe 1/2021

The suppression of nonlinear panel flutter response at elevated temperatures using a nonlinear energy sink

Jian Zhou, Minglong Xu, Jun Zha, Zhichun Yang

03.01.2021 | Ausgabe 1/2021

Performance improvement of low frequency piezoelectric energy harvester incorporating holes with an in-house experimental set-up

Priyabrata Biswal, Sougata Kumar Kar, Banibrata Mukherjee

03.11.2020 | Ausgabe 1/2021

Analysis of a double layer porous hybrid journal bearing considering the combined influence of wear and non-Newtonian behaviour of lubricant

Anil Singh, Satish C. Sharma

20.11.2020 | Ausgabe 1/2021 Open Access

Two-dimensional nonlinear time fractional reaction–diffusion equation in application to sub-diffusion process of the multicomponent fluid in porous media

P. Pandey, S. Das, E-M. Craciun, T. Sadowski

25.11.2020 | Ausgabe 1/2021

Temporal instability characteristics of Rayleigh–Taylor and Kelvin–Helmholtz mechanisms of an inviscid cylindrical interface

M. Vadivukkarasan

06.01.2021 | Ausgabe 1/2021

Experimental investigation of spreading and receding behaviors of Newtonian and viscoelastic droplet impacts on inclined dry surfaces

M. Norouzi, M. K. Sheykhian, M. M. Shahmardan, A. Shahbani-Zahiri

17.11.2020 | Ausgabe 1/2021

An efficient self-stress design of tensegrity shell structures

Kamal Mirzaaghazadeh, Karim Abedi, Behzad Shekastehband

04.01.2021 | Ausgabe 1/2021

Some features of the acceleration impulse response function

M. K. Iwanaga, M. J. Brennan, B. Tang, O. Scussel, F. C. L. Almeida

04.01.2021 | Ausgabe 1/2021

Model of interaction of a rigid mesh with a deformable target

V. A. Goloveshkin, N. N. Myagkov, T. A. Shumikhin

12.12.2020 | Ausgabe 1/2021 Open Access

Model-based mechanical design of a passive lower-limb exoskeleton for assisting workers in shotcrete projection

Stefano L. Capitani, Matteo Bianchi, Nicola Secciani, Marco Pagliai, Enrico Meli, Alessandro Ridolfi

03.01.2021 | Ausgabe 1/2021

Modeling on contact fatigue under starved lubrication condition

A. Kolivand, S. Li, Q. Zhang

11.01.2021 | Ausgabe 1/2021 Open Access

Amplitude and rotational speed control of variable length pendulum by periodic input

Hidekazu Kajiwara, Manabu Aoyagi

19.10.2020 | Commentary to | Ausgabe 1/2021

Commentary to “Backbone curves of coupled cubic oscillators in one-to-one internal resonance: bifurcation scenario, measurements and parameter identification DOI 10.1007/s11012-020-01132-2”

Marco Zurru

02.11.2020 | Reply to | Ausgabe 1/2021

Reply to the commentary written by M. Zurru on the paper “Backbone curves of coupled cubic oscillators in one-to-one internal resonance: bifurcation scenario, measurements and parameter identification”, by Arthur Givois, Jin-Jack Tan, Cyril Touzé and Olivier Thomas,

Arthur Givois, Jin-Jack Tan, Cyril Touzé, Olivier Thomas

11.01.2021 | Ausgabe 1/2021 Open Access

Buckling of circular plates with functional grading in two directions

Alessandro Fiorini, Giuseppe Ruta

06.01.2021 | Correction | Ausgabe 1/2021

Correction to: The delamination of a growing elastic sheet with adhesion

Gaetano Napoli, Stefano Turzi

Aktuelle Ausgaben

Premium Partner


    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.