Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

Erschienen in:
Buchtitelbild

2021 | OriginalPaper | Buchkapitel

1. Mechanical Testing of Extruded Magnesium for the Development of Automobile Seat Frame Structures

verfasst von: S. P. Sikora, L. Bergmann, E. Beeh, H. Sulaiman

Erschienen in: Materials Design and Applications III

Verlag: Springer International Publishing

share
TEILEN

Abstract

To validate a novel structural concept in magnesium lightweighting in early development stages, a magnesium alloy of type MgMnCe is characterized at coupon level and validated at profile level. The feasibility of friction stir welding is confirmed to integrate the alloy into the structure. Specimens are extracted from or set up on basis of generic profiles. For characterization among others, miniature tensile specimens in extrusion and transverse direction are utilized. Tensile results show the orthotropic material character of the ME21 alloy used. In transverse direction, stiffness as well as strength increases, while elongation at break decreases. The material shows a strongly nonlinear, irreversible material behavior starting at small loads and a moderate strain rate dependency. On profile level, closed rectangular profiles in four-point bending are used for validation at high impact velocities. These tests reveal large deformation without local failure. This deformation makes the use of closed rectangular profiles promising for the application in seat backrest structures.
Literatur
Zurück zum Zitat André, N.M., Goushegir, S.M., Scharnagl, N., dos Santos, J.F., Canto, L.B., Amancio-Filho, S.T.: Composite surface pre-treatments: Improvement on adhesion mechanisms and mechanical performance of metal-composite friction spot joints with additional film interlayer. J. Adhes. 94(9), 723–742 (2018) CrossRef André, N.M., Goushegir, S.M., Scharnagl, N., dos Santos, J.F., Canto, L.B., Amancio-Filho, S.T.: Composite surface pre-treatments: Improvement on adhesion mechanisms and mechanical performance of metal-composite friction spot joints with additional film interlayer. J. Adhes. 94(9), 723–742 (2018) CrossRef
Zurück zum Zitat André, N.M., dos Santos, J.F., Amancio-Filho, S.T.: Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat. Materials 12, 891 (2019) CrossRef André, N.M., dos Santos, J.F., Amancio-Filho, S.T.: Evaluation of joint formation and mechanical performance of the AA7075-T6/CFRP spot joints produced by frictional heat. Materials 12, 891 (2019) CrossRef
Zurück zum Zitat Gall, S., Coelho, R.S., Müller, S., Reimers, W.: Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets. Mater. Sci. Eng. A 579, 180–187 (2013) CrossRef Gall, S., Coelho, R.S., Müller, S., Reimers, W.: Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets. Mater. Sci. Eng. A 579, 180–187 (2013) CrossRef
Zurück zum Zitat Huppmann, M., Gall, S., Müller, S., Reimers, W.: Changes of the texture and the mechanical properties of the extruded Mg alloy ME21 as a function of the process parameters. Mater. Sci. Eng. A 528, 342–354 (2010) CrossRef Huppmann, M., Gall, S., Müller, S., Reimers, W.: Changes of the texture and the mechanical properties of the extruded Mg alloy ME21 as a function of the process parameters. Mater. Sci. Eng. A 528, 342–354 (2010) CrossRef
Zurück zum Zitat Suhuddin, U.F.H., Fischer, V., Kostka, A., dos Santos, J.F.: Microstructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steel. Sci. Technol. Weld. Joining 22(8), 658–665 (2017) CrossRef Suhuddin, U.F.H., Fischer, V., Kostka, A., dos Santos, J.F.: Microstructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steel. Sci. Technol. Weld. Joining 22(8), 658–665 (2017) CrossRef
Zurück zum Zitat Zhou, P., Beeh, E., Friedrich, H.E.: A novel testing method for uniaxial compression of thin-sheet magnesium alloys. Exp. Mech. 56, 513–519 (2016a) CrossRef Zhou, P., Beeh, E., Friedrich, H.E.: A novel testing method for uniaxial compression of thin-sheet magnesium alloys. Exp. Mech. 56, 513–519 (2016a) CrossRef
Zurück zum Zitat Zhou, P., Beeh, E., Friedrich, H.E.: Influence of Tension-compression asymmetry on the mechanical behavior of AZ31B magnesium alloy sheets in bending. J. Mater. Eng. Perform. JMEPEG 25, 853–865 (2016b) CrossRef Zhou, P., Beeh, E., Friedrich, H.E.: Influence of Tension-compression asymmetry on the mechanical behavior of AZ31B magnesium alloy sheets in bending. J. Mater. Eng. Perform. JMEPEG 25, 853–865 (2016b) CrossRef
Metadaten
Titel
Mechanical Testing of Extruded Magnesium for the Development of Automobile Seat Frame Structures
verfasst von
S. P. Sikora
L. Bergmann
E. Beeh
H. Sulaiman
Copyright-Jahr
2021
DOI
https://doi.org/10.1007/978-3-030-68277-4_1

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.