Skip to main content

2015 | OriginalPaper | Buchkapitel

3. Mechanics of Anisotropic Composite Materials

verfasst von : Artur W. Ganczarski, S. Hernik, Jacek J. Skrzypek

Erschienen in: Mechanics of Anisotropic Materials

Verlag: Springer International Publishing

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Mechanics of composite materials was in the last decade one of the most rapidly explored engineering area, basically due to huge progress in composite fabrication and use. The main problem referred in this chapter is how to correctly predict averaged effective properties by implementation of numerous homogenization techniques. Useful classification of composites with respect to the format of effective stiffness matrix, based on the analogy between the crystal lattice symmetry and respective configuration of reinforcement in the RUC, is given. Extended section is focused on conventionally used Hill’s theorem on upper and lower bounds by Voigt and Reuss’ isotropic estimation for approximate determination of stiffness and compliance matrices of anisotropic composite. Consistent application of the Hill theorem to the elements of elastic stiffness or compliance matrices (but not to engineering anisotropy constants) enable to explain some peculiarities of the Poisson ratio diagrams, met in respective bibliography (e.g., Aboudi et al., Micromechanics of Composite Materials, 2013; Sun and Vaidya, Compos. Sci. Technol. 56:171–179, 1996; Gan et al., Int. J. Solids Struct. 37:5097–5122, 2000). The new effective proposal to achieve approximation of the mechanical modules of unidirectionally reinforced composites by the use of hybrid-type rule of weighted average between the Voigt and Reuss upper and lower estimates is proposed. Capability of this averaged interpolation was checked based on selected findings by Gan et al. (Int. J. Solids Struct. 37:5097–5122, 2000) for Boron/Al composite, which show good convergence and enable to treat weighting coefficients as universal ones over the full \(V_\mathrm{f}\) range.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Aboudi, J., Arnold, S.M., Bednarcyk, B.A.: Micromechanics of Composite Materials. Elsevier, Amsterdam (2013) Aboudi, J., Arnold, S.M., Bednarcyk, B.A.: Micromechanics of Composite Materials. Elsevier, Amsterdam (2013)
2.
Zurück zum Zitat Auriault, J.-L., Boutin, C., Geindreau, C.: Homogenization of Coupled Phenomena in Heterogenous Media, pp. 39–44. Wiley-ISTE, New York (2009)CrossRef Auriault, J.-L., Boutin, C., Geindreau, C.: Homogenization of Coupled Phenomena in Heterogenous Media, pp. 39–44. Wiley-ISTE, New York (2009)CrossRef
3.
Zurück zum Zitat Banks-Sills, L., Leiderman, V., Fang, D.: On the effect of particle shape and orientation on elastic properties of metal matrix composites. Compos. Part B 28B, 465–481 (1997)CrossRef Banks-Sills, L., Leiderman, V., Fang, D.: On the effect of particle shape and orientation on elastic properties of metal matrix composites. Compos. Part B 28B, 465–481 (1997)CrossRef
4.
Zurück zum Zitat Bayat, M., Aghdam, M.M.: A micromechanics-based analysis of effects of square and hexagonal fiber arrays in fibrous composites using DQEM. Eur. J. Mech.—A/Solids 32, 32–40 (2012)CrossRef Bayat, M., Aghdam, M.M.: A micromechanics-based analysis of effects of square and hexagonal fiber arrays in fibrous composites using DQEM. Eur. J. Mech.—A/Solids 32, 32–40 (2012)CrossRef
5.
Zurück zum Zitat Berryman, J.G.: Bounds and self-consistent estimates for elastic constants of random polycrystals with hexagonal, trigonal, and tetragonal symmetries. J. Mech. Phys. Solids 53, 2141–2173 (2005)CrossRef Berryman, J.G.: Bounds and self-consistent estimates for elastic constants of random polycrystals with hexagonal, trigonal, and tetragonal symmetries. J. Mech. Phys. Solids 53, 2141–2173 (2005)CrossRef
6.
Zurück zum Zitat Chamis, C.C.: Simplified composite micromechanics equations for hygral, thermal and mechanical properties. SAMPE Q. 15, 14–23 (1984) Chamis, C.C.: Simplified composite micromechanics equations for hygral, thermal and mechanical properties. SAMPE Q. 15, 14–23 (1984)
7.
Zurück zum Zitat Desmorat, R., Marull, R.: Non-quadratic Kelvin models based plasticity criteria for anisotropic materials. Int. J. Plast. 27, 328–351 (2011)CrossRef Desmorat, R., Marull, R.: Non-quadratic Kelvin models based plasticity criteria for anisotropic materials. Int. J. Plast. 27, 328–351 (2011)CrossRef
8.
Zurück zum Zitat Drago, A., Pindera, M.-J.: Micro-macromechanical analysis of heterogeneous materials: macroscopically homogeneous vs periodic microstructures. Compos. Sci. Technol. 67, 1246–1263 (2007) Drago, A., Pindera, M.-J.: Micro-macromechanical analysis of heterogeneous materials: macroscopically homogeneous vs periodic microstructures. Compos. Sci. Technol. 67, 1246–1263 (2007)
9.
Zurück zum Zitat Gan, H., Orozco, C.E., Herkovich, C.T.: A strain-compatible method for micromechanical analysis of multi-phase composites. Int. J. Solids Struct. 37, 5097–5122 (2000)CrossRef Gan, H., Orozco, C.E., Herkovich, C.T.: A strain-compatible method for micromechanical analysis of multi-phase composites. Int. J. Solids Struct. 37, 5097–5122 (2000)CrossRef
10.
Zurück zum Zitat Hashin, Z., Rosen, B.W.: The elastic moduli of fiber-reinforced materials. J. Appl. Mech. 31, 223–232 (1964)CrossRef Hashin, Z., Rosen, B.W.: The elastic moduli of fiber-reinforced materials. J. Appl. Mech. 31, 223–232 (1964)CrossRef
11.
Zurück zum Zitat Herakovich, C.T.: Mechanics of Fibrous Composites. Wiley, New York (1998) Herakovich, C.T.: Mechanics of Fibrous Composites. Wiley, New York (1998)
12.
Zurück zum Zitat Herakovich, C.T., Aboudi, J.: Thermal effects in composites. In: Hetnarski, R.B. (ed.) Stresses, Thermal, pp. 1–142. Lastran Corporation-Publishing Division, Rochester (1999) Herakovich, C.T., Aboudi, J.: Thermal effects in composites. In: Hetnarski, R.B. (ed.) Stresses, Thermal, pp. 1–142. Lastran Corporation-Publishing Division, Rochester (1999)
13.
Zurück zum Zitat Hill, R.: Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357–372 (1963)CrossRef Hill, R.: Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357–372 (1963)CrossRef
14.
Zurück zum Zitat Jiang, C.P., Xu, Y.L., Chueng, Y.K., Lo, S.H.: A rigorous analytical method for doubly periodic cylindrical inclusions under longitudinal shear and its application. Mech. Mater. 36, 225–237 (2004)CrossRef Jiang, C.P., Xu, Y.L., Chueng, Y.K., Lo, S.H.: A rigorous analytical method for doubly periodic cylindrical inclusions under longitudinal shear and its application. Mech. Mater. 36, 225–237 (2004)CrossRef
15.
Zurück zum Zitat Kenaga, D., Doyle, J.F., Sun, C.T.: The characterization of boron/aluminium in the nonlinear ranges as an orthotropic elastic plastic material. J. Compos. Mater. 27, 516–531 (1987)CrossRef Kenaga, D., Doyle, J.F., Sun, C.T.: The characterization of boron/aluminium in the nonlinear ranges as an orthotropic elastic plastic material. J. Compos. Mater. 27, 516–531 (1987)CrossRef
16.
Zurück zum Zitat Lekhnitskii, S.G.: Theory of Elasticity of an Anisotropic Body (trans: English). Mir Publishers, Moscow (1981) Lekhnitskii, S.G.: Theory of Elasticity of an Anisotropic Body (trans: English). Mir Publishers, Moscow (1981)
17.
Zurück zum Zitat Li, S.: Boundary conditions for unit cells from periodic microstructures and their implications. Compos. Sci. Technol. 68, 1962–1974 (2008)CrossRef Li, S.: Boundary conditions for unit cells from periodic microstructures and their implications. Compos. Sci. Technol. 68, 1962–1974 (2008)CrossRef
18.
Zurück zum Zitat Li, S., Wongsto, A.: Unit cells for micromechanical analyses of particle-reinforced composites. Mech. Mater. 36, 543–572 (2004)CrossRef Li, S., Wongsto, A.: Unit cells for micromechanical analyses of particle-reinforced composites. Mech. Mater. 36, 543–572 (2004)CrossRef
19.
Zurück zum Zitat Liu, B., Feng, X., Zhang, S.-M.: The effective Young’s modulus of composites beyond the Voigt estimation due to the Poisson effect. Compos. Sci. Technol. 69, 2198–2204 (2009)CrossRef Liu, B., Feng, X., Zhang, S.-M.: The effective Young’s modulus of composites beyond the Voigt estimation due to the Poisson effect. Compos. Sci. Technol. 69, 2198–2204 (2009)CrossRef
20.
Zurück zum Zitat Love, A.E.H.: Mathematical Theory of Elasticity. Dover Publications, New York (1944) Love, A.E.H.: Mathematical Theory of Elasticity. Dover Publications, New York (1944)
21.
Zurück zum Zitat Martin-Herrero, J., Germain, C.: Microstructure reconstruction of fibrous C/C composites from X-ray microtomography. Carbon 45, 1242–1253 (2007)CrossRef Martin-Herrero, J., Germain, C.: Microstructure reconstruction of fibrous C/C composites from X-ray microtomography. Carbon 45, 1242–1253 (2007)CrossRef
22.
Zurück zum Zitat Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21, 571–574 (1973)CrossRef Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21, 571–574 (1973)CrossRef
23.
Zurück zum Zitat Nye, J.F.: Własności fizyczne kryształów. PWN, Warszawa (1962) Nye, J.F.: Własności fizyczne kryształów. PWN, Warszawa (1962)
24.
Zurück zum Zitat Ochoa, O.O., Reddy, J.N.: Finite Element Analysis of Composite Laminates. Kluwer Academic Publishers, Dordrecht (1992)CrossRef Ochoa, O.O., Reddy, J.N.: Finite Element Analysis of Composite Laminates. Kluwer Academic Publishers, Dordrecht (1992)CrossRef
25.
Zurück zum Zitat Paley, M., Aboudi, J.: Micromechanical analysis of composites by generalized method of cells. Mech. Mater. 14, 127–139 (1992)CrossRef Paley, M., Aboudi, J.: Micromechanical analysis of composites by generalized method of cells. Mech. Mater. 14, 127–139 (1992)CrossRef
26.
Zurück zum Zitat Pidaparti, R.M.V., May, A.W.: A micromechanical analysis to predict the cord-rubber composite properties. Compos. Struct. 34, 361–369 (1996)CrossRef Pidaparti, R.M.V., May, A.W.: A micromechanical analysis to predict the cord-rubber composite properties. Compos. Struct. 34, 361–369 (1996)CrossRef
27.
Zurück zum Zitat Reuss, A.: Berechnung der Flissgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. Z. angew. Math. Mech. 9, 49–58 (1929)CrossRef Reuss, A.: Berechnung der Flissgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. Z. angew. Math. Mech. 9, 49–58 (1929)CrossRef
28.
Zurück zum Zitat Selvadurai, A.P.S., Nikopour, H.: Transverse elasticity of a unidirectionally reinforced composite with an irregular fiber arrangement: experiments, theory and computations. Compos. Struct. 94, 1973–1981 (2012)CrossRef Selvadurai, A.P.S., Nikopour, H.: Transverse elasticity of a unidirectionally reinforced composite with an irregular fiber arrangement: experiments, theory and computations. Compos. Struct. 94, 1973–1981 (2012)CrossRef
29.
Zurück zum Zitat Sun, C.T., Chen, J.L.: A micromechanical model for plastic behavior of fibrous composites. Compos. Sci. Technol. 40, 115–129 (1990)CrossRef Sun, C.T., Chen, J.L.: A micromechanical model for plastic behavior of fibrous composites. Compos. Sci. Technol. 40, 115–129 (1990)CrossRef
30.
Zurück zum Zitat Sun, C.T., Vaidya, R.S.: Prediction of composite properties from a representative volume element. Compos. Sci. Technol. 56, 171–179 (1996)CrossRef Sun, C.T., Vaidya, R.S.: Prediction of composite properties from a representative volume element. Compos. Sci. Technol. 56, 171–179 (1996)CrossRef
31.
Zurück zum Zitat Sun, C.T., Zhou, S.G.: Failure of quasi-isotropic composite laminates with free edges. J. Reinf. Plast. Compos. 7, 515–557 (1988)CrossRef Sun, C.T., Zhou, S.G.: Failure of quasi-isotropic composite laminates with free edges. J. Reinf. Plast. Compos. 7, 515–557 (1988)CrossRef
32.
Zurück zum Zitat Tamma, K.K., Avila, A.F.: An integrated micro/macro modelling and computational methodology for high temperature composites. In: Hetnarski, R.B. (ed.) Thermal Stresses, pp. 143–256. Lastran Corporation-Publishing Division, Rochester (1999) Tamma, K.K., Avila, A.F.: An integrated micro/macro modelling and computational methodology for high temperature composites. In: Hetnarski, R.B. (ed.) Thermal Stresses, pp. 143–256. Lastran Corporation-Publishing Division, Rochester (1999)
33.
Zurück zum Zitat Tjong, S.C., Ma, Z.Y.: Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng. R29(3–4), 49–113 (2000)CrossRef Tjong, S.C., Ma, Z.Y.: Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng. R29(3–4), 49–113 (2000)CrossRef
34.
Zurück zum Zitat Voigt, W.: Über die Beziehungen zwischen beiden Elastizitätskonstanten isotroper Körpär. Wied. Ann. 38, 573–587 (1889)CrossRef Voigt, W.: Über die Beziehungen zwischen beiden Elastizitätskonstanten isotroper Körpär. Wied. Ann. 38, 573–587 (1889)CrossRef
35.
Zurück zum Zitat Whitney, J.M., Riley, M.B.: Elastic properties of fiber reinforced composite materials. AIAA J. 4, 1537–1542 (1966)CrossRef Whitney, J.M., Riley, M.B.: Elastic properties of fiber reinforced composite materials. AIAA J. 4, 1537–1542 (1966)CrossRef
36.
Zurück zum Zitat Wongsto, A., Li, S.: Micromechanical FE analysis of UD fibre-reinforced composites with fibers distributed at random over the transverse cross-section. Compos. Part A 36, 1246–1266 (2005)CrossRef Wongsto, A., Li, S.: Micromechanical FE analysis of UD fibre-reinforced composites with fibers distributed at random over the transverse cross-section. Compos. Part A 36, 1246–1266 (2005)CrossRef
37.
Zurück zum Zitat Würkner, M., Berger, H., Gabbert, U.: On numerical evaluation of effective material properties for composite structures with rhombic arrangements. Int. J. Eng. Sci. 49, 322–332 (2011)CrossRef Würkner, M., Berger, H., Gabbert, U.: On numerical evaluation of effective material properties for composite structures with rhombic arrangements. Int. J. Eng. Sci. 49, 322–332 (2011)CrossRef
Metadaten
Titel
Mechanics of Anisotropic Composite Materials
verfasst von
Artur W. Ganczarski
S. Hernik
Jacek J. Skrzypek
Copyright-Jahr
2015
DOI
https://doi.org/10.1007/978-3-319-17160-9_3

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.