Skip to main content
main-content

Tipp

Weitere Kapitel dieses Buchs durch Wischen aufrufen

Erschienen in:
Buchtitelbild

2020 | OriginalPaper | Buchkapitel

Meso-modeling of Closed-Cell Aluminum Foam Under Compression Loading

verfasst von: Eka Oktavia Kurniati, Tatacipta Dirgantara, Leonardo Gunawan, Annisa Jusuf

Erschienen in: Advances in Lightweight Materials and Structures

Verlag: Springer Singapore

share
TEILEN

Abstract

In this study, aluminum foam modeling in the mesoscale has been done under compression loading to consider the closed-cell aluminum foam deformation behavior. The detailed geometry of aluminum foam in mesoscale was developed using a micro-CT scan. The shape of aluminum foam cells was modeled as a circle with various radius. The data of the radius was calculated using ImageJ software. It was known that the distribution of the cell radius is normal. The cells were constructed randomly using MATLAB following a normal distribution. The finite element software LS-DYNA was used for compression loading on closed-cell aluminum foam 2D simulation. It was revealed that cell walls were collapsed during compression until dense, which caused densification. The compressive stress–strain curve was generated from compression simulation for relative density 0.15 and various strain rates. The numerical result for compression was in good agreement with the experimental result.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
1.
Zurück zum Zitat Cs K et al (2004) X-ray tomography and finite element simulation of the indentation behavior of metal foams. Mater Sci Eng A 387–389:321–325 Cs K et al (2004) X-ray tomography and finite element simulation of the indentation behavior of metal foams. Mater Sci Eng A 387–389:321–325
2.
Zurück zum Zitat Jeon I et al (2009) Cell wall mechanical properties of closed-cell Al foam. Mech Mater 41:60–73 CrossRef Jeon I et al (2009) Cell wall mechanical properties of closed-cell Al foam. Mech Mater 41:60–73 CrossRef
3.
Zurück zum Zitat Jeon I et al (2010) Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography. Mech Mater 42:227–236 CrossRef Jeon I et al (2010) Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography. Mech Mater 42:227–236 CrossRef
4.
Zurück zum Zitat Shen J, Lu G, Ruan G (2010) Compressive behaviour of closed-cell aluminium foams at high strain rates. Compos B 41:678–685 CrossRef Shen J, Lu G, Ruan G (2010) Compressive behaviour of closed-cell aluminium foams at high strain rates. Compos B 41:678–685 CrossRef
5.
Zurück zum Zitat Dou R et al (2016) Simulation of compression behavior and strain-rate effect for aluminum foam sandwich panels. Comput Mater Sci 112:205–209 CrossRef Dou R et al (2016) Simulation of compression behavior and strain-rate effect for aluminum foam sandwich panels. Comput Mater Sci 112:205–209 CrossRef
6.
Zurück zum Zitat Dou R, Qiu S, Ju Y (2016) Simulation of effect of loading rate on compression properties in the two-dimensional model of aluminum foam sandwich panels. Mater Trans 57(10):1857 CrossRef Dou R, Qiu S, Ju Y (2016) Simulation of effect of loading rate on compression properties in the two-dimensional model of aluminum foam sandwich panels. Mater Trans 57(10):1857 CrossRef
7.
Zurück zum Zitat Praveen Kumar A, Akbar A, Jusuf A, Gunawan L (2019) Significance of material constitutive model and forming parameters on the crashworthiness performance of capped cylindrical tubular structures. Proc Inst Mech Eng Part L J Mater Des Appl 234(2):320–334 Praveen Kumar A, Akbar A, Jusuf A, Gunawan L (2019) Significance of material constitutive model and forming parameters on the crashworthiness performance of capped cylindrical tubular structures. Proc Inst Mech Eng Part L J Mater Des Appl 234(2):320–334
8.
Zurück zum Zitat Praveen Kumar A, Sivasankar S (2019) Importance of anisotropic coefficients for material constitutive models in forming and crushing simulations. Int J Mecha Prod Eng Res Dev 9(6):765–778 Praveen Kumar A, Sivasankar S (2019) Importance of anisotropic coefficients for material constitutive models in forming and crushing simulations. Int J Mecha Prod Eng Res Dev 9(6):765–778
9.
Zurück zum Zitat Praveen Kumar A, Shrivaathsav S (2019) Influence of forming parameters on the crash performance of capped cylindrical tubes using LS-DYNA follow-on simulations. Int J Interact Des Manuf 13(3):1215–1232 CrossRef Praveen Kumar A, Shrivaathsav S (2019) Influence of forming parameters on the crash performance of capped cylindrical tubes using LS-DYNA follow-on simulations. Int J Interact Des Manuf 13(3):1215–1232 CrossRef
10.
Zurück zum Zitat Ashby MF et al (2000) Metal foams: a design guide. Butterworth-Heinemann, MA Ashby MF et al (2000) Metal foams: a design guide. Butterworth-Heinemann, MA
11.
Zurück zum Zitat Lankford J, Nicholls A, Danemann. Dynamic compressive behavior of closed-cell aluminum foams. Mechanical and Materials Engineering Division, Southwest Research Institute. USA Lankford J, Nicholls A, Danemann. Dynamic compressive behavior of closed-cell aluminum foams. Mechanical and Materials Engineering Division, Southwest Research Institute. USA
12.
Zurück zum Zitat Dirgantara T (2018) Crashworthiness analysis of foam–filled square column considering strain rate effect of the foam. Thin-Walled Struct 129:365–380 CrossRef Dirgantara T (2018) Crashworthiness analysis of foam–filled square column considering strain rate effect of the foam. Thin-Walled Struct 129:365–380 CrossRef
Metadaten
Titel
Meso-modeling of Closed-Cell Aluminum Foam Under Compression Loading
verfasst von
Eka Oktavia Kurniati
Tatacipta Dirgantara
Leonardo Gunawan
Annisa Jusuf
Copyright-Jahr
2020
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-15-7827-4_1

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.